Tripp Lite PDUMH20HVATNET Handleiding

Tripp Lite Niet gecategoriseerd PDUMH20HVATNET

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite PDUMH20HVATNET (60 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/60

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Owner’s Manual

Switched/Metered Rack PDU

with Automatic Transfer Switch

Models: PDUMH15AT, PDUMH15ATNET, PDUMH15HVAT,

PDUMH15HVATNET, PDUMH20AT, PDUMH20ATNET,

PDUMH20HVAT, PDUMH20HVATNET

Series Number: AGAC7625

1. Important Safety Instructions 2

2. Installation 3

2.1 Mounting the PDU 3

2.2 Connecting the PDU 3

2.3 Networking the PDU 6

3. Features 7

4. Conﬁguration and Operation 10

4.1 Automatic Transfer Switch 10

5. Technical Support 12

6. Warranty and Product Registration 12

Español 13

Français 25

Русский

Deutsch 49

WARRANTY REGISTRATION

automatically entered to win an ISOBAR

surge protector in our monthly drawing!

www.tripplite.com/warranty

21-03-429-933721.indb 1

SAVE THESE INSTRUCTIONS

• This manual contains instructions and warnings that should be followed

during the installation, operation and storage of this product. Failure to

heed these instructions and warnings may affect the product warranty.

• Warning: This equipment is compliant with Class A of CISPR 32. In a

residential environment, this equipment may cause radio interference.

CAUTION Only those who are properly trained or qualified to use this device should

do so. Anyone who is not trained or qualified should not use this device unless it is under

the supervision of someone who is properly trained or qualified to do so.

Children must be supervised to ensure that they do not use the device as a toy.

Never use the device if the cord and plug are damaged; if it is not working properly,

or if it has been dropped or damaged, take it to an authorized service center for

inspection and repair.

If the power cord is damaged, it must be replaced by the manufacturer, its authorized

service agent, or by qualified personnel in order to avoid a danger.

• The PDU provides the convenience of multiple outlets, but DOES NOT provide surge or line noise

protection for connected equipment.

• The PDU is designed for indoor use only, in a controlled environment, away from excess

moisture, temperature extremes, conductive contaminants, dust or direct sunlight.

• Keep indoor ambient temperature between 32°F and 122°F (0°C and 50°C).

• The PDU must be installed by a qualified technician only.

• Do not attempt to mount the PDU to an insecure or unstable surface.

• Install in accordance with National Electrical Code standards. Be sure to use the proper

overcurrent protection for the installation, in accordance with the plug/equipment rating.

• Connect the PDU to an outlet that is in accordance with your local building codes and that is

adequately protected against excess currents, short circuits and earth faults.

• The electrical outlets supplying power to the equipment should be installed near the equipment

and easily accessible.

• Do not connect the PDU to an ungrounded outlet or to extension cords or adapters that

eliminate the connection to ground.

• Be sure to provide a local disconnect device on any models that are permanently installed

without a plug that is easily accessible.

• Never attempt to install electrical equipment during a thunderstorm.

• Individual equipment connected to the PDU should not draw more current than the individual

PDU’s outlet’s rating.

• The total load connected to the PDU must not exceed the maximum load rating for the PDU.

• Do not attempt to modify the PDU, input plugs or power cables.

• Do not drill into or attempt to open any part of the PDU housing. There are no user-serviceable

parts inside.

• Do not attempt to use the PDU if any part of it becomes damaged.

• Use of this equipment in life support applications where failure of this equipment can reasonably

be expected to cause the failure of the life support equipment or to significantly affect its safety

or effectiveness is not recommended.

1. Important Safety Instructions

21-03-429-933721.indb 2

PDUMH15AT, PDUMH15ATNET,

PDUMH20AT, PDUMH20ATNET

PDUMH15HVAT, PDUMH15HVATNET

PDUMH20HVAT, PDUMH20HVATNET

Primary InputSecondary Input

Primary Input

Secondary Input

Outlets

PDUMH20AT

PDUMH20ATNET

PDUMH15HVAT

PDUMH15HVATNET

PDUMH15AT

PDUMH15ATNET

Primary Input Primary Input Primary Input Primary Input

PDUMH20HVAT

PDUMH20HVATNET

Primary Input (120V Models) Primary Input (208-240V Models)

2.1 Mounting the PDU

The PDU supports 1U Rack configurations.

Note: The user must determine the fitness of

hardware and procedures before mounting. The PDU

and included hardware are designed for common

rack and rack enclosure types and may not be

appropriate for all applications. Exact mounting

configurations may vary.

1U Rack Mounting: Attach the PDU to the

rack by inserting four user-supplied screws A

through the PDU mounting brackets B and

into the mounting holes of the rack rail as

shown.

2. Installation

2.2 Connecting the PDU

All PDU models include a primary and secondary AC power input (see diagram). The reference

table below lists each model’s primary and secondary inputs:

Model Primary Input Secondary Input

PDUMH15AT NEMA 5-15P (permanent cord) IEC C14 inlet

PDUMH15ATNET NEMA 5-15P (permanent cord) IEC C14 inlet

PDUMH15HVAT* IEC C14 inlet (detachable cord) IEC C14 inlet

PDUMH15HVATNET* IEC C14 inlet (detachable cord) IEC C14 inlet

PDUMH20AT NEMA L5-20P (permanent cord) IEC C20 inlet

PDUMH20ATNET NEMA L5-20P (permanent cord) IEC C20 inlet

PDUMH20HVAT* IEC C20 inlet (detachable cord) IEC C20 inlet

PDUMH20HVATNET* IEC C20 inlet (detachable cord) IEC C20 inlet

*PDU includes one C13 to C14 (PDUMH15HVAT/NET) or two C19 to C20 (PDUMH20HVAT/NET) interconnection

cables for the two primary and secondary inlets, which may be used to connect to upstream UPS sources.

Alternately, the user can supply IEC cables fitted with country-specific plugs.

21-03-429-933721.indb 3

Product specificaties

Merk:	Tripp Lite
Categorie:	Niet gecategoriseerd
Model:	PDUMH20HVATNET
Kleur van het product:	Zwart
Gewicht:	4690 g
Breedte:	440.2 mm
Diepte:	375.2 mm
Hoogte:	43.7 mm
Snoerlengte:	3.6 m
Gewicht verpakking:	7710 g
Breedte verpakking:	528.3 mm
Diepte verpakking:	594.4 mm
Hoogte verpakking:	137.2 mm
Materiaal behuizing:	Metaal
LED-indicatoren:	Ja
Land van herkomst:	Taiwan
Certificering:	UL 60950 (USA, Canada), CE (Europe), Class A (Emissions), NOM (Mexico)
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-15 - 50 °C
Hoogte, in bedrijf:	0 - 3000 m
Afmetingen (B x D x H):	439 x 376 x 44 mm
Montage:	Horizontaal
Stekker:	C20 stekker
Hoeveelheid per (buitenste) hoofdverpakking:	1 stuk(s)
Rackcapaciteit:	1U
AC-ingangsfrequentie:	50 - 60 Hz
Aantal AC uitgangen:	10 AC-uitgang(en)
Nominale input voltage:	200-240 V
Stopcontacttypes:	C13 coupler,C19 coupler
Stroom (max.):	20 A
PDU types:	Geschakeld
Netspanning, in bedrijf:	200-240 V