Tripp Lite PDU3XEVSR6G30B Handleiding

Tripp Lite Stekkerdoos PDU3XEVSR6G30B

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite PDU3XEVSR6G30B (106 pagina's) in de categorie Stekkerdoos. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/106

User’s Guide

LX Platform Devices

Documentation Notice: This User’s Guide is a supplement to the printed manual that came with your Tripp Lite LX Platform device. Refer to the printed manual

for instructions on hardware installation and basic conﬁguration, including IP address assignment. If you have misplaced your printed manual, you can download an

electronic version at www.tripplite.com/support and entering the model number of your product in the search box.

1. Introduction 2

1.1 System Requirements 2

2. Installation and Conﬁguration 3

2.1 Saving Conﬁguration Changes 3

2.2 Default UPS System Shutdown Settings 3

2.3 SNMP Conﬁguration 3

3. The Web Interface 4

3.1 Accessing the Web Interface 4

3.2 Status 5

3.2.1 Status/Overview 5

3.2.2 Status/Details 6

3.2.3 Status/Alarms 6

3.3 Control 6

3.3.1 Control/Device 7

3.3.2 Control/Loads 8

3.3.3 Control/Load Groups 9

3.3.4 Control/Events 10

3.4 Conﬁguration 11

3.4.1 Conﬁguration/System Settings 11

3.4.2 Conﬁguration/Device Settings 12

3.4.3 Conﬁguration/Contacts 13

3.4.3.1 Email 13

3.4.3.2 SNMP V1 14

3.4.3.3 SNMP V2c 14

3.4.3.4 SNMP V3 15

3.4.3.5 HTTP 15

3.4.3.6 HTTPS 16

3.4.3.7 Conﬁguration/Network 16

3.4.3.8 Conﬁguration/Network/Services 17

3.4.3.9 Conﬁguration/Network/SMTP 17

3.4.3.10 Conﬁguration/Network/Internet 18

3.4.3.11 Conﬁguration/Network/Domain 18

3.4.4 Conﬁguration/Actions 19

3.4.4.1 Deﬁning Action Types 19

3.4.5 Conﬁguration/Scheduling 21

3.4.6 Security 22

3.4.7 Conﬁguration/Log Settings 23

3.5 Logs 24

3.5.1 Logs/Events Log 25

3.5.2 Logs/Data Log 25

3.5.3 Logs/Accounting Log 26

3.6 About 27

4. Telnet/SSH Console 28

4.1 Device Menu 29

4.1.1 Status 30

4.1.2 Identiﬁcation 31

4.1.3 Controls 32

4.1.3.1 Control Data 32

4.1.4 Events 33

4.1.5 Loads 35

4.1.5.1 Load Conﬁguration 35

4.1.5.2 Load Groups 36

4.1.5.3 Ramp/Shed Settings 37

4.1.6 Preferences and Thresholds 38

4.1.7 Device Alarms 38

4.1.8 Logs 38

4.2 System Conﬁguration 38

4.2.1 Address Book 39

4.2.1.1 Email Contacts 39

4.2.1.2 SNMP Contacts 40

4.2.1.3 HTTP Contacts 42

4.2.2 Global Actions 43

4.2.2.1 Action Proﬁles 43

4.2.2.2 Schedules 55

4.2.3 Security 59

4.2.3.1 Authentication Method 59

4.2.3.2 Local Users 60

4.2.3.3 RADIUS Servers 63

4.2.3.4 Change Password 64

4.2.4 Date/Time 64

4.2.4.1 Time Source Data Entry Menu 64

4.2.4.2 Time Zone 65

4.2.4.3 NTP Settings 65

4.2.4.4 Time Settings 66

4.2.5 Local Device Discovery 66

4.2.6 Restart PowerAlert Device Manager 67

4.3 Network Conﬁguration 68

4.3.1 IP Conﬁguration 68

4.3.1.1 Host Name 69

4.3.1.2 Domain Data Entry Menu 69

4.3.1.3 IPV4 Settings 69

4.3.1.4 IPV6 Settings 70

4.3.2 User Access Interfaces 70

4.3.2.1 Telnet/SSH 70

4.3.2.2 Web 71

4.3.2.3 SNMP Settings 72

4.3.2.4 FTP/SFTP 72

4.3.3 Remote Services 73

4.3.3.1 Email Settings 74

4.3.3.2 Remote Syslog Servers 75

4.3.3.3 Auto Probes 78

4.4 Alarms and Logging 88

4.4.1 Alarms 88

4.4.1.1 Alarm Details 89

4.4.2 View Logs 89

4.4.2.1 Data Log 90

4.4.2.2 Event Log 92

4.4.3 Logging Settings 95

4.4.3.1 Accounting Log Settings 95

4.4.3.2 Application Log Settings 95

4.4.3.3 Data Log Settings 96

4.4.3.4 Event Log Settings 97

4.4.3.5 Format Settings 98

4.5 About 98

5. Command Line Interface 99

5.1 Syntax Conventions 99

5.2 Manual Pages 100

5.3 Output Conventions 100

5.4 Getting Started with the PowerAlert CLI 100

6. Troubleshooting 102

7. Technical Support 102

8. Appendix 103

Table of Contents

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

Tripp Lite LX Platform devices contain an Ethernet network interface that enables remote monitoring, control and condition reporting. These

functions can be performed using Tripp Lite Management Software, SNMP Network Management Software, a Web browser or Telnet/SSH. This

User's Guide focuses on conﬁguration and management offered through the web interface and Telnet/SSH. The web interface for LX Platform

devices is known as the PowerAlert® Device Manager, or PADM, for short.

• Tripp Lite LX Platform Device, such as WEBCARDLX, PDU3E-series PDUs, PDU3XE-series PDUs, LX sufﬁx PDUs and LX-compatible Cooling

products

• Ethernet network that supports the TCP/IP protocol

• One of the following options for remote monitoring and control:

• Tripp Lite Management Software

• SNMP-based Network Management Software

• Web browser (Chrome, Firefox, Internet Explorer or Safari)

• VT-100 Telnet and/or SSH Client

• For “Terminal Mode” conﬁguration only:

• Terminal emulation software program (such as TeraTerm Pro by Ayera Technologies)

Warning: Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the

life support equipment or to signiﬁcantly affect its safety or effectiveness is not recommended.

1. Introduction

1.1 System Requirements

When used with a Tripp Lite UPS during a power failure, WEBCARDLX is pre-conﬁgured to shut down the UPS system two minutes after receiving a

low battery signal. This allows the UPS system to provide the maximum available runtime to connected equipment. To change the default setting,

select Device Shutdown from the Action Type dropdown menu (refer to 3.4.4 Conﬁgurations/Actions or 4.2.2.1 Action Proﬁles for Telnet/SSH).

For instructions on hardware installation and basic conﬁguration, refer to the printed manual included with your Tripp Lite LX Platform device.

For instructions on loading a ﬁrmware or device driver upgrade, refer to the applicable release notes. The manual and release notes can be

downloaded by going to www.tripplite.com and typing the model name of the LX Platform device in the search bar.

2.1 Saving Conﬁguration Changes

Most conﬁguration changes made in PowerAlert Device Manager will take effect immediately. PADM and Telnet/SSH will typically advise you if

your conﬁguration changes require a restart to take effect.

Regardless, to ensure that conﬁguration changes persist, it is recommended that you restart PowerAlert Device Manager. Most conﬁguration

changes will auto-save after about 30 minutes of idle time; changes to the network settings will not.

Restarting PADM will not disrupt power to equipment powered through your UPS or PDU and has no effect on the general operation of your

Tripp Lite device.

2.2 Default UPS System Shutdown Settings

2. Installation and Conﬁguration

LX Platform devices function as SNMP-managed devices on your network, using the SNMP agent and Management Information Base (MIB). The

SNMP agent resides in the LX Platform device ﬁrmware and responds to standard SNMP commands (Get, Get Next and Set). It can also generate

SNMP traps (messages). The MIB determines which parameters can be monitored and controlled. Three MIB ﬁles—TRIPPLITE.MIB,

TRIPPLITE-PRODUCTS.MIB and RFC-1628-UPS.MIB—must be loaded on each Network Management Station that will monitor the managed

device. (The ﬁles can be downloaded from www.tripplite.com/support. Consult your Network Management Station software documentation for

instructions on how to import MIB ﬁles.)

Note: SNMP Users are conﬁgured in the Conﬁguration > Security > User section of PADM.

SNMPv3 Deﬁnitions

Username The identiﬁer of the user proﬁle. SNMPv3 maps Gets, Sets and Traps to a user proﬁle by matching the username

of the proﬁle to the username in the data packet being transmitted. A username can have up to 32 ASCII

characters (alphanumeric and the following special characters: !@#$%^*(){[}]~_-).

Authentication Passphrase A phrase of 8 to 32 ASCII characters (alphanumeric and the following special characters: !@#$%^*(){[}]~_-)

that veriﬁes that the Network Management System (NMS) communicating with this device through SNMPv3 is

the NMS it claims to be, that the message has not been changed during transmission, and that the message

was communicated in a timely manner, indicating that it was not delayed and that it was not copied and sent

again later at an inappropriate time.

Privacy Passphrase A phrase of 8 to 32 ASCII characters (alphanumeric and the following special characters: !@#$%^*(){[}]~_-)

that ensures the privacy of the data (by means of encryption) that a Network Management System (NMS) is

sending to this device or receiving from this device through SNMPv3.

Authentication Protocol The Tripp Lite implementation of SNMPv3 supports only SHA (as of 15.04.0) authentication.

Privacy Protocol The Tripp Lite implementation of SNMPv3 supports only AES (as of 15.04.0) as the protocol for encrypting and

decrypting data.

Public Value A ﬁeld provided to enter a username/password hint for SNMPv3 Admin users. This SNMPv3 value is part of the

SNMPv3 USM User Table.

2.3 SNMP Conﬁguration

Product specificaties

Merk:	Tripp Lite
Categorie:	Stekkerdoos
Model:	PDU3XEVSR6G30B
Kleur van het product:	Zwart
Gewicht:	7970 g
Breedte:	55.1 mm
Diepte:	64 mm
Hoogte:	1778 mm
Snoerlengte:	1.83 m
Gewicht verpakking:	11240 g
Breedte verpakking:	245.1 mm
Diepte verpakking:	1927.1 mm
Hoogte verpakking:	175 mm
Soort:	Driefasig
Gebruikershandleiding:	Ja
Materiaal behuizing:	Metaal
LED-indicatoren:	Ja
Beeldscherm:	LCD
Meegeleverde kabels:	AC
Land van herkomst:	Taiwan
Afmetingen verpakking (BxDxH):	246 x 1928 x 175 mm
Certificering:	UL60950-1: 2007 R12.11, IEC 60950-1: 2005+A1:2009, CAN/CSA-C22.2 NO. 60950-1-07+A1:2011, NOM, CE (EN 60950-1), FCC/CE, RoHS, TAA
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-15 - 60 °C
Spanning:	240 V
Hoogte, in bedrijf:	0 - 3000 m
Maximaal vermogen:	17300 W
Afmetingen (B x D x H):	55.1 x 64 x 1778 mm
Montage:	Verticaal
Stekker:	IEC309
Hoeveelheid per (buitenste) hoofdverpakking:	1 stuk(s)
Rackcapaciteit:	0U
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Aantal AC uitgangen:	30 AC-uitgang(en)
Nominale input voltage:	415 V
Stopcontacttypes:	C13 coupler,C19 coupler
Stroom (max.):	24 A
PDU types:	Geschakeld
Netspanning, in bedrijf:	240 V