Tripp Lite ENBRKTCVR Handleiding

Tripp Lite Niet gecategoriseerd ENBRKTCVR

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite ENBRKTCVR (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

Installation Guide

Wireless Access Point Right-Angle

Wall Bracket with Cover

Model: ENBRKTCVR

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Español 5 • Français 9 • 13Русский

Components List

Installation

IMPORTANT:

Ensure that you have received all parts according to the component checklist prior to installing. If any parts are missing or

faulty, visit www.tripplite.com/support for service.

(x1) (x1) (x1) (x1) (x1)(x4) (x2)

1. Mount Bracket to Wall

Mark the exact location of the

mounting holes

Attach the

bracket onto

the wall

Drill pilot holes

Find a wood stud

location for mounting

the wall mount

(Mounting Hardware

Not Included)

Installation

IMPORTANT!

Attach all data and power cables to the access point prior to attaching to the mount.

•

Installers are responsible for providing wall-mounting hardware. Use a minimum of two #10 x 2” or larger screws (not included) to secure the

mount in place.

• Make sure that mounting screws are anchored into the center of the studs. Use of a stud ﬁnder is highly recommended.

• If there is no stud at the mounting location, it is recommended that you use four anchors to secure the mount in place. Due to the

weight of the mount, plastic expansion wall anchors are not recommended for drywall installations. Suitable anchors include: threaded

drywall anchors, threaded drywall toggles, sleeve-type hollow wall anchors (a.k.a. molly bolts) or toggle bolts.

• If placing the mount over a telecommunications receptacle, remove the wall plate, then fasten the mount to the wall. Once secured,

fasten the wall plate back over the receptacle.

•

If no telecommunications receptacle is available, a surface mount box (or biscuit jack) and equipment cord can be mounted inside the unit.

• Use an adhesive-backed surface mount box.

2. Run Data and Power Cable (If Required) Through the Mount’s Rear Cutout or

Side Conduit Cutouts

3. Using the Provided Screws, Attach the Access Point to the Mount

3a. Cisco Low-Proﬁle Bracket

(AIR-AP-BRACKET-1)* Installation

3b. Cisco Universal Bracket

(AIR-AP-BRACKET-2)* Installation

AIR-AP-BRACKET-2

Security Tab Access Point

Security Tab

Zip Tie

(Included)

* Cisco brackets not included.

Product specificaties

Merk:	Tripp Lite
Categorie:	Niet gecategoriseerd
Model:	ENBRKTCVR
Kleur van het product:	Wit
Gewicht:	1410 g
Breedte:	187.4 mm
Diepte:	230.8 mm
Hoogte:	128.3 mm
Gewicht verpakking:	2100 g
Breedte verpakking:	240 mm
Diepte verpakking:	290 mm
Hoogte verpakking:	195 mm
Land van herkomst:	China
Maximale gewichtscapaciteit:	5 kg
Certificering:	RoHS
Materiaal:	Staal
Aantal per verpakking:	1 stuk(s)
Merkcompatibiliteit:	Alle merken
(Buitenste) hoofdverpakking hoogte:	265 mm
(Buitenste) hoofdverpakking breedte:	605 mm
(Buitenste) hoofdverpakking brutogewicht:	22500 g
(Buitenste) hoofdverpakking lengte:	1000 mm
Hoeveelheid per (buitenste) hoofdverpakking:	10 stuk(s)
Type product:	WLAN-toegangspunt bevestiging
Code geharmoniseerd systeem (HS):	8302.50.0000
GTIN (EAN/UPC)-nummer (buitenste) hoofdverpakking:	10037332214451