Tripp Lite CSC32USB Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite CSC32USB (24 pagina's) in de categorie Oplader voor mobiel apparaat. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
1
Table of Contents
1. Important Safety Instructions 2
2. Overview 2
3. Feature Identification 3
4. Setup 4
4.1 Installing the Handle Bracket 4
and Power Cord Manager
4.2 Adjusting Storage Shelf Dividers 4
4.3 Powering the USB Charger/Hub Unit 4
4.4 Door Locks 4
5. 32-Port USB Charger/Hub 5
5.1 USB Charger/Hub Features 5
5.2 Connecting Devices to the 5
USB Charger/Hub
5.3 Connecting a Computer to the 5
USB Charger/Hub
6. Wall Installation 6
6.1 Removing Casters and Handle 6
6.2 Wall-Mounting the Charging Station 6
7. Specifications 7
8. Storage, Service and Cleaning 7
9. Warranty and Product Registration 8
Español 9
Français 17
Tablet Charge and Sync Cart
32-Port Models: CSC32USB (CSC32USBW)
Owners Manual
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2016 Tripp Lite. All trademarks are the sole property of their respective owners.
2
1. Important Safety Instructions
2. Overview
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that must be followed during the installation and operation of the product described in this manual.
Failure to comply may invalidate the warranty and cause property damage or personal injury.
USB Charger/Hub Unit:
To remove the USB Charger/Hub from the supply mains, the power cord serves as a disconnect device.
If any of the following situations arise, schedule an appointment with a service technician to have your equipment inspected:
The equipment has been exposed to moisture
The equipment has been dropped and damaged
The equipment shows obvious signs of breakage
The equipment is not functioning properly or is not functioning according to the instructions described in this Owner’s Manual
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support
equipment or to significantly affect its safety or effectiveness is not recommended.
Charging Station Cabinet:
Keep the charging station in a controlled indoor environment away from moisture, temperature extremes, flammable liquids and gasses, conductive
contaminants, dust and direct sunlight.
Leave adequate space around the charging station for proper ventilation. Do not block, cover or insert objects into the charging station’s external
ventilation openings.
The charging station is extremely heavy. Use caution when handling the charging station. Do not attempt to unpack or mount it unassisted. Use a
mechanical device such as a forklift or pallet jack to move the charging station in the shipping container.
Do not place containers of liquid or stack items on the cabinet.
Inspect the shipping container and the charging station for shipping damage. Do not use the charging station if it is damaged.
Use caution when cutting packing materials. The charging station could be scratched, causing damage not covered by the warranty.
Save all packing materials for later use. Repacking and shipping the charging station cabinet or equipment without the original packing materials
may cause product damage that will void the warranty.
For Mobile Applications:
The charging station comes with four pre-installed locking/swivel casters.
Always use the included handle when moving the charging station (see section 4.1 Installing the Handle Bracket and Power Cord Manager for
more information).
When moving the charging station cabinet, always push it from behind; never pull it toward you.
A rolling charging station can cause personal injury and property damage if not properly supervised. If rolling the charging station down a ramp is
required, use extreme caution. Do not attempt to use ramps that have a slope grade greater than 12%.
For Wall-Mount Installations:
Casters ship pre-installed with the charging station. Remove the casters and handle before attempting to mount the charging station to a wall (see
section 6.1 Removing Casters and Handle for more information).
Before mounting, first make sure that the wall surface can safely support the combined load of the charging station, equipment stored and all
attached hardware and components.
Always use suitable mounting means when installing to cinder block, concrete, drywall or wood studs.
Your charging station is an all-in-one solution for storing and charging for up to 32 devices. With four pre-installed locking/swivel casters and an
attachable, reversible handle accessory, your charging station is ideal for mobile applications. Your charging station can also be conveniently mounted
to walls, as well as configured for stationary desktop or floor placement. To prevent theft and device tampering, your charging station enclosure comes
equipped with locking steel doors.
3
3. Feature Identification
CSC32USB(W)
1 Locking Split Doors
2 Adjustable Storage Shelves (hold up to 16 Devices per Shelf)
3 Blanking Panels (Removable)
4 Reversible Handle
5 Swivel/Locking Casters
6 Power Cord Manager
7 Power Cord Access Holes (1 Located on Each Side)
8 Padlock Hasp (User Supplies Lock)
9 Cable Lock Routing Holes (User Supplies Lock)
10
Side Panel with Keyhole Wall Mount Slots
(See Section 6 for More Information)
Not Shown:
USB Charger/Hub Units (In Interior of Unit)
Included Accessory Hardware
12 x Hex Screws
Hex Key
1
8
3
5
5
5
2
4
6
7
7
2
9
10
10


Product specificaties

Merk: Tripp Lite
Categorie: Oplader voor mobiel apparaat
Model: CSC32USB
Kleur van het product: Zwart
Gewicht: 60870 g
Breedte: 883.9 mm
Diepte: 513.1 mm
Hoogte: 916.9 mm
Gewicht verpakking: 76660 g
Breedte verpakking: 599.9 mm
Diepte verpakking: 855 mm
Hoogte verpakking: 1015 mm
Soort: Wagentje voor draagbaar apparaatbeheer
Gebruikershandleiding: Ja
Met slot: Ja
Land van herkomst: China
Aantal schappen: 2 schappen
Duurzaamheidscertificaten: RoHS
(Buitenste) hoofdverpakking hoogte: 1015 mm
(Buitenste) hoofdverpakking breedte: 599.9 mm
(Buitenste) hoofdverpakking brutogewicht: 76660 g
(Buitenste) hoofdverpakking lengte: 855 mm
Hoeveelheid per (buitenste) hoofdverpakking: 1 stuk(s)
AC-ingangsspanning: 100-240 V
AC-ingangsfrequentie: 50 - 60 Hz
Maximale schermgrootte: - "
Number of devices supported: 32
Ondersteunde apparaatconnectors: USB
Aantal sleutels meegeleverd: 2 stuk(s)

Heb je hulp nodig?

Als je hulp nodig hebt met Tripp Lite CSC32USB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Oplader voor mobiel apparaat Tripp Lite

Handleiding Oplader voor mobiel apparaat

Nieuwste handleidingen voor Oplader voor mobiel apparaat