Tripp Lite CS16USBWHG Handleiding

Tripp Lite Niet gecategoriseerd CS16USBWHG

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite CS16USBWHG (24 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24

Table of Contents

1. Important Safety Instructions 2

2. Overview 2

3. Feature Identiﬁcation 3

4. Setup 4

4.1 Adjusting Storage Shelf Dividers 4

4.2 Powering the USB Charger/Hub Unit 4

4.3 Door Locks 4

5. 16-Port USB Charger/Hub 5

5.1 USB Charger/Hub Features 5

5.2 Connecting Devices to the 5

USB Charger/Hub

5.3 Connecting a Computer to the 6

USB Charger/Hub

6. Wall Mounting 6

7. Desktop/Floor Placement 6

8. Ultraviolet Light Operation 6

9. Speciﬁcations 7

10. Storage, Service and Cleaning 8

11. Optional Casters and Handle 8

12. Warranty and Product Registration 8

Español 9

Français 17

Hospital-Grade USB Charging

Station with Anti-Microbial

Coating and UV Light

Model: CS16USBWHG

Owner’s Manual

WARRANTY REGISTRATION

automatically entered to win an ISOBAR®

surge protector in our monthly drawing!

tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

1. Important Safety Instructions

2. Overview

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that must be followed during the installation and operation of the product described in this manual.

Failure to comply may invalidate the warranty and cause property damage or personal injury.

WARNING!

• The charging station is intended to sanitize mobile devices and non-critical medical devices. The subsequent use of the devices disinfected by the

charging station is the sole responsibility of the user.

• Non-protected eyes or skin should never be exposed directly to the ultraviolet light.

• Ultraviolet (UVC) bulbs contain mercury and must be properly recycled or disposed of as hazardous waste in accordance with local, state and federal

regulations.

• Only Tripp Lite-approved replacement UVC bulbs should be used in the device.

• Only qualified personnel should perform UVC bulb replacement. Take precautions with broken UVC bulbs to avoid inhalation, ingestion or contact

with eyes or skin. Refer to your local codes for disposal requirements.

• Do not bypass any of the safety precautions built into the device. Failure to comply may result in exposing skin to the UV light. Prolonged skin

exposure may generate redness and a sunburn-like condition.

• The charging station should not be operated by children.

• Do not remove any warnings, cautions or descriptive labeling from the charging station.

USB Charger/Hub Unit:

• To remove the USB Charger/Hub unit from the supply mains, the power cord serves as a disconnect device.

• If any of the following situations arise, schedule an appointment with a service technician to have your equipment inspected:

• The equipment has been exposed to moisture

• The equipment has been dropped and damaged

• The equipment shows obvious signs of breakage

• The equipment is not functioning properly or is not functioning according to the instructions described in this Owner’s Manual

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support

equipment or to significantly affect its safety or effectiveness is not recommended.

Charging Station Cabinet:

• Keep the charging station in a controlled indoor environment away from moisture, temperature extremes, flammable liquids and gasses, conductive

contaminants, dust and direct sunlight.

• Leave adequate space around the charging station for proper ventilation. Do not block, cover or insert objects into the charging station’s external

ventilation openings.

• The charging station is extremely heavy. Use caution when handling the charging station. Do not attempt to unpack or mount it unassisted. Use a

mechanical device such as a forklift or pallet jack to move the charging station in the shipping container.

• Do not place containers of liquid or stack items on the cabinet.

• Inspect the shipping container and the charging station for shipping damage. Do not use the charging station if it is damaged.

• Use caution when cutting packing materials. The charging station could be scratched, causing damage not covered by the warranty.

• Save all packing materials for later use. Repacking and shipping the charging station cabinet or equipment without the original packing materials

may cause product damage that will void the warranty.

For Wall-Mount and Desktop Installations:

• Before mounting, first make sure that the wall surface can safely support the combined load of the charging station, equipment stored and all

attached hardware and components.

• Always use suitable mounting means when installing to cinder block, concrete, drywall or wood studs.

• For desktop installations, the mounting brackets that shipped with the unit can also be used to secure the charging station to a desktop surface.

The hospital-grade charging station is an all-in-one solution for sanitizing, storing and charging for up to 16 tablets, such as iPad

® and Android™

devices.

The unit’s built-in ultraviolet lights help disinfect electronic devices at the touch of a button. The UV lights destroy most microbes on the devices

without the use of damaging heat, liquids or chemicals.

The surface of the charging station is protected by a patented antimicrobial coating with EPA-registered and FDA-compliant silver ionic technology. The

antimicrobial protection is 99.9% effective in inhibiting bacteria and viruses, such as C. diff and MRSA. The coating meets the requirements of

JIS Z 2801:2000, an international standard for evaluating efficacy in antimicrobial products.

Your charging station can be conveniently mounted to walls, as well as used for stationary desktop or floor placement installations. You can also

convert it to a mobile cart with Tripp Lite’s optional CSHANDLEKIT2 (sold separately), and roll it where needed. To prevent theft and device tampering,

your charging station enclosure comes equipped with locking steel doors.

3. Feature Identification

1 Locking Split Doors

2 Adjustable Storage Shelf (Holds up to 16 Devices)

3 Blanking Panel (Removable)

4 Power Cord Access Holes (1 Located on Each Side)

5 5-15P HG Hospital-Grade Input Plug with 10 ft. Cord

6 Padlock Hasp (Lock Not Included)

7 Rear Panel with Keyhole Wall-Mount Slots Section 6(See for More Information)

8 UV Lamp

9 Start Button and LED Status Indicators

Not Shown:

USB Charger/Hub Units (In Interior of Unit)

Keys

DOOR CLOSEDDOOR CLOSED

/ "READY" / "READY"

START BUTTON

UV LIGHT

CYCLE “ON”

(10 min)

Product specificaties

Merk:	Tripp Lite
Categorie:	Niet gecategoriseerd
Model:	CS16USBWHG
Kleur van het product:	Wit
Gewicht:	46600 g
Breedte:	513.1 mm
Diepte:	770.4 mm
Hoogte:	494.3 mm
Snoerlengte:	3.05 m
Gewicht verpakking:	59160 g
Breedte verpakking:	599.9 mm
Diepte verpakking:	855 mm
Hoogte verpakking:	638 mm
Soort:	Kast voor draagbaar apparaatbeheer
Materiaal behuizing:	Staal
Plaatsing:	Muur
Met slot:	Ja
Land van herkomst:	China
Oplaadbron:	USB Type-A
Stroomspanning bescherming:	Overbelasting
Output current:	40 A
UV-C LED-disinfectie:	Ja
(Buitenste) hoofdverpakking hoogte:	638 mm
(Buitenste) hoofdverpakking breedte:	599.9 mm
(Buitenste) hoofdverpakking brutogewicht:	59160 g
(Buitenste) hoofdverpakking lengte:	855 mm
Hoeveelheid per (buitenste) hoofdverpakking:	1 stuk(s)
AC-ingangsspanning:	110 - 120 V
AC-ingangsfrequentie:	50/60 Hz
Maximale schermgrootte:	- "
Number of devices supported:	16
Ondersteunde draagbare apparaten:	Smartphone,Tablet
Slot type:	Key,Padlock
Ondersteunde apparaatconnectors:	Lightning,Micro-USB,Mini-USB,USB
Sleufbreedte:	38.2 mm
Sleufdiepte:	390.5 mm
Sleufhoogte:	268.1 mm