TP Link TL-SG1210P Handleiding

TP Link Schakelaar TL-SG1210P

Lees hieronder de 📖 handleiding in het Nederlandse voor TP Link TL-SG1210P (6 pagina's) in de categorie Schakelaar. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6

Connection

Installation Guide

Gigabit Desktop Switch with PoE/PoE+

LED Explanation

Power

On: Power on

O: Power o

Link/Act (For TL-SG1008P)

On: A device is linked to the correspoding

port and running properly.

Flashing: Transmitting or receiving data.

O: No device is linked to the

corresponding port.

Link/Act, Uplink 1, Uplink 2 (For TL-SG1210P)

Green On: Running at 1000 Mbps, but no activity.

Green Flashing: Running at 1000 Mbps and is

transmitting or receiving data.

Yellow On: Running at 10/100 Mbps, but no activity.

Yellow Flashing: Running at 10/100 Mbps and is

transmitting or receiving data.

O: No device is linked to the corresponding port.

Package Contents: Switch, Power Adapter, Power Cord and Installation Guide.

On: Providing PoE power

Flashing: PoE fault

O: Not providing PoE power

PoE Status

On: Running at 1000 Mbps.

O: Running at 10/100 Mbps or no device

is linked to the corresponding port.

1000Mbps (For TL-SG1008P)

PoE MAX

For TL-SG1008P:

On: 48 W≤Total power supply < 55 W

Flashing: Total power supply ≥ 55 W

O: Total power supply < 48 W

For TL-SG1210P:

On: 56 W≤Total power supply < 63 W

Flashing: Total power supply ≥ 63 W

O: Total power supply < 56 W

Note: For simplicity, we will take TL-SG1008P for example throughout the Guide.

IP Camera AP

Ethernet Ports (1-8)

PoE Ports (1-4)

IP Phone

PoE Devices

Router

LAN PortWAN Port

Internet

DC P er Adapterow

AC Power Cord

Note:

PoE/PoE+ ports typically connect to PoE Devices. Besides, PoE/PoE+ ports can also connect to non-PoE devices, but only transmit data.

TL-SG1210P has two uplink ports, which typically connect to uplink devices like routers.

Uplink 1 is an SFP port and works with a 1000 Mbps SFP module. Uplink 2 is an RJ45 port.

For TL-SG1008P, maximum PoE power is 15.4 W for each PoE port and 55 W for all PoE ports in total.

For TL-SG1210P, maximum PoE power is 30 W for each PoE port and 63 W for all PoE ports in total.

4. PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guranteed and will vary as a result of client

limitations and environmental factors.

Frequently Asked Questions (FAQ)

The Power LED should be lit when the power system is working normally.

If the Power LED is not lit, please try the following:

A1:

Make sure the AC power cord is connected to the switch with power

source properly.

A2:

Make sure the voltage of the power supply meets the requirements

of the input voltage of the switch.

A3: Make sure the power source is ON.

Q1. Why is the Power LED not lit?

Please try the following:

A1:

Make sure that the cable connectors are rmly plugged into the

switch and the device.

Make sure the connected device is turned on and works normally.

The cable must be less than 100 meters long (328 feet).

Q2. Why is the Link/Act LED not lit while a device is

connected to the corresponding port?

Operating Temperature

Storage Temperature

Operating Humidity

Storage Humidity

0 C to 40 C (32 F to 104˚ ˚ ˚ ˚F)

-40 C to 70 C (-40 F to 158˚ ˚ ˚ ˚F)

10% to 90%RH non-condensing

5% to 90%RH non-condensing

Environmental and Physical Specications

IEEE 802.3i, 802.3u, 802.3ab, 802.3x, 802.3af, 802.1p

For TL-SG1210P: IEEE 802.3z, 802.3at

CSMA/CD

For TL-SG1008P:

8 10/100/1000 Mbps RJ45 Ports, Auto-Negotiation

MDI/MDIX;

PoE Ports: Port 1-Port 4, Total Power Supply: 55 W

For TL-SG1210P:

9 10/100/1000 Mbps RJ45 Ports, Auto-Negotiation

MDI/MDIX; 1 1000 Mbps SFP port;

PoE Ports: Port 1-Port 8, Total Power Supply: 63 W

10BASE-T: UTP category 3, 4, 5 cable (maximum 100 m);

EIA/TIA-568 100 Ω STP (maximum 100 m)

100BASE-TX: UTP category 5, 5e cable (maximum 100 m);

EIA/TIA-568 100 Ω STP (maximum 100 m)

1000BASE-T: UTP category 5e cable or above (maximum

100 m); EIA/TIA-568 100 Ω STP (maximum 100 m)

1000BASE-SX/LX/LX10/BX10: MMF, SMF (For

TL-SG1210P)

For TL-SG1008P: 16 Gbps

For TL-SG1210P: 20 Gbps

Store-and-Forward

Automatically learning, automatically aging

External Power Adapter

Input: 100-240 V AC, 50/60 Hz

Output:

For TL-SG1008P: 48 V DC/1.25 A

For TL-SG1210P: 53.5 V DC/1.31 A

Standard

General Specications

Specications

Q3. Why is PoE/PoE+ ports not supplying power for PoE devices?

If total power consumption of connected PoE devices exceeds the maximum, the

system will cut o the power to ports with the lowest PoE priority. A PoE port with

a smaller index number has a higher PoE priority. Let’s take TL-SG1008P as an

example. If port 1, 2 and 4 are consuming 15.4 W respectively, and an additional

PoE device with 12 W is connected to port 3, the total power consumption

exceeds 55 W, so the system will cut o the power to port 4.

Power Supply

MAC Address Learning

Transfer Method

MAC Address Table

Backbone Bandwidth

Network Media (Cable)

Interface

Protocol

For technical support and other information, please visit

https://www.tp-link.com/support, or simply scan the QR code.

If you have any suggestions or needs on the product guides,

welcome to email techwriter@tp-link.com.cn.

To ask questions, find answers, and communicate with TP-Link

users or engineers, please visit https://community.tp-link.com

to join TP-Link Community.

Wall Mountable For TL-SG1008P: No

For TL-SG1210P: Yes

Distance Between

Mounting Holes For TL-SG1210P: 150 mm

Product specificaties

Merk:	TP Link
Categorie:	Schakelaar
Model:	TL-SG1210P
Kleur van het product:	Grijs
Breedte:	209 mm
Diepte:	126 mm
Hoogte:	26 mm
Breedte verpakking:	315 mm
Diepte verpakking:	240 mm
Hoogte verpakking:	70 mm
Gebruikershandleiding:	Ja
Materiaal behuizing:	Metaal
Stroombron:	DC
LED-indicatoren:	Ja
Stroom:	1.31 A
Vermogensverbruik (max):	78.13 W
Certificering:	CE, FCC, RoHS
Ingangsspanning:	53.5 V
Netwerkstandaard:	IEEE 802.1p,IEEE 802.3af,IEEE 802.3at,IEEE 802.3x
Temperatuur bij opslag:	-40 - 70 °C
Luchtvochtigheid bij opslag:	5 - 90 procent
Vermogenstoevoer inclusief:	Ja
Quality of Service (QoS):	Ja
Auto MDI/MDI-X:	Ja
Power over Ethernet (PoE):	Ja
Switchingcapaciteit:	20 Gbit/s
MAC-adrestabel:	4000 entries
10G support:	Nee
IGMP snooping:	Ja
Switch type:	Unmanaged
Aantal basis-switching RJ-45 Ethernet-poorten:	9
Aantal Gigabit Ethernet (koper)-poorten:	9
Type basis-switching RJ-45 Ethernet-poorten:	Gigabit Ethernet (10/100/1000)
Aantal moduleslots SPF:	1
Koperen ethernetbekabelingstechnologie:	10BASE-T,100BASE-TX,1000BASE-T
Warmtedissipatie:	266.42 BTU/h
Auto-negotiation:	Ja
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 90 procent
Code geharmoniseerd systeem (HS):	85176990
Totaal Power over Ethernet (PoE)-budget:	63 W
Aantal Power over Ethernet plus (PoE +)-poorten:	8
Fanloos:	Ja
Store-and-forward:	Ja
Fiber ethernet cabling technologie:	1000BASE-X
MAC-adres zelfverouderende functie:	Ja
MAC-adres zelflerende functie:	Ja
Fiber type:	Single-mode