TP Link Omada EAP673-Extender Handleiding

Bekijk gratis de handleiding van TP Link Omada EAP673-Extender (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 50 mensen en kreeg gemiddeld 4.9 sterren uit 9 reviews. Heb je een vraag over TP Link Omada EAP673-Extender of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick Installation Guide

Wall Plate Wi-Fi 6 Extender

Note: This guide uses EAP673-Extender for demonstration. Images may

dier from your actual product.

©2024 TP-Link 7106511194 REV1.0.0

Hardware Overview

1Power On2

LED Indicator

On: Working normally/Initializing.

O: Working abnormally/Power o/LED is turned o.

Flash:

•Flash twice: Initialization is complete.

•Flash once per second: The EAP is upgrading.

•The EAP is resetting or the Omada Quick ash:

Controller is locating the EAP.*

* When the Locate feature is activated in the Omada Controller, the

LED will ash quickly for 10 minutes to help you locate and identify

the device. You can disable this feature manually to stop the device

from ashing.

• The EAP is in isolated state.Sustained ash:

RESET Button

With the EAP powered on, press and hold the button for

about 5 seconds until the LED ashes, then release the

button. The EAP will restore to factory default settings.

LED/Wi-Fi Button

When the EAP is working in Standalone Mode and

enabled with Wi-Fi Control, press the button to turn on/o

both the Wi-Fi and LED. In other cases, press the button

to turn on/o the LED only.

LAN Port

Connect a wired device via an Ethernet cable for network

access.

LED/Wi-Fi Button

RESET Button

LAN Port

LED

Power

Outlet

Plug

Plug the EAP into a power outlet.

Note: For safety, only plug the extender in the direction as shown

below.

Set Up

3

Choose a method to set up your EAPs:

• Method 1: Controller Mode

To congure and manage EAPs in batches on a

central platform, namely Omada Controller.

• Method 2: Standalone Mesh Mode

To build an Omada Mesh network to congure and

manage EAPs.

Business CommunityDownload CenterSetup Videos

Tip:

You can also set up the EAP in AP Mode to transform your

existing wired network to a wireless one. For details, refer to the

EAP’s user guide at

https://www.tp-link.com/support/download/?type=smb

Product specificaties