TP Link Omada EAP650-Desktop Handleiding

Bekijk gratis de handleiding van TP Link Omada EAP650-Desktop (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 50 mensen en kreeg gemiddeld 4.0 sterren uit 3 reviews. Heb je een vraag over TP Link Omada EAP650-Desktop of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick Installation Guide

Desktop Access Point

Note: This guide uses EAP650-Desktop for demonstration. Images may dier from your actual product.

©2024 TP-Link 7106511611 REV1.0.1

*

When the Locate feature is activated in the Omada Controller, the System LED will ash quickly for 10

minutes to help you locate and identify the device. You can disable this feature manually to stop the device

from ashing.

**

802.3at/bt PoE input is required. 802.3af and passive PoE inputs will disable 5 GHz band and PoE output and

thus not recommended.

***

The device can supply PoE output power only when it is receiving 802.3at/bt PoE input power.

Blue On: Power supply is normal.

Flash Orange: Power supply is insucient.

O: Power is o, or LEDs are turned o.

LEDIndication

Power

System

On: The EAP is initializing or working normally.

O: The EAP is working abnormally.

Flash: •

Flash Twice: Initialization is complete.

•

Flash Once per Second: The EAP is upgrading or resetting.

•

Quick Flash: The Controller is locating the EAP.

*

•Sustained Flash: The EAP is in the isolated state.

On: The SIP account is registered successfully.

Slow Flash: The phone is o hook.

Quick Flash: The phone is ringing.

O: No SIP account is registered.

FXS

Green On: The port is receiving 802.3bt PoE power.

Orange On: The port is receiving non-802.3bt PoE power

**

.

O: The port is not connected or not receiving PoE power.

On: The port is supplying power to a PoE powered device.

O: The port is not connected or not supplying power.

IN

(ETH0)

OUT

(ETH1)

On: The port is linked but has no activity.

Flash: The port is transmitting or receiving data.

O: The port is not linked.

Link/Act

(ETH0~ETH3)

With the EAP powered on, press and hold the button for about 5

seconds until the System LED ashes, then release the button.

The EAP will restore to factory settings.

Press the button to turn on/o the LEDs.

ButtonDescription

RESET

LED

Connect to a power socket via the provided power adapter.

Connect to a power sourcing equipment for both data

transmission and PoE input

**

.

Connect to a PoE powered device for both data transmission and

PoE output

***

.

Connect to a client device to transmit data.

Connect to a phone to make and receive calls over the internet.

InterfaceDescription

Power

ETH0

(PoE IN)

ETH1

(PoE OUT)

ETH2 ~ ETH3

FXS

Business CommunityDownload CenterSetup Videos

The EAP can only be powered by a power adapter, or by a PSE device (such as a PoE switch) that complies with Power Source Class 2 (PS2) or

Limited Power Source (LPS) defined in the standard of IEC 62368-1.

Note: For power supply specifications, refer to the product label.

Option 1: Power by PoE SwitchOption 2: Power by Power Adapter

Phone

Internet

Connect to FXS port

Connect to ETH0 (PoE IN)port

PoE Switch

Power Adapter

Internet

Connect to Power port

Connect to an Ethernet port

Connect to FXS port

Phone

Hardware Connection

2

Option 1: Desktop Mounting

1. Attach the EAP to the provided multi-functional base as shown in

the figure.

Option 2: Wall Mounting

1. Secure the provided multi-functional base to the wall in the correct

direction with the provided screws.

2. Attach the EAP to the base as shown in the figure.2. Place the EAP vertically on a horizontal surface (such as a desktop

or shelf) that is out of children’s reach.

Hardware Installation

3

Hardware Overview

1

Product specificaties