TP Link M7400 Handleiding
Pagina's 2 Router
Bekijk de handleiding van TP Link M7400 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
1. Install the SIM Card and Battery
·If you cannot access the internet, refer to > . FAQQ1
·
By default, Power Saving is enabled and the Mobile Wi-Fi will turn o Wi-Fi when no wireless devices are connected to it for 10 minutes.
To resume the Wi-Fi connection, press the Power button.
!
2. Connect to the Internet
©2025 TP-Link 7100000049 REV1.0.0
LED Indicators
* Images are for demonstration only.
b. Connect your wireless device to the Mobile Wi-Fi using the
default SSID and Wireless Password on the info card.
a. Press and hold the Power button
to power on the Mobile Wi-Fi.
Wi-Fi
Wi-Fi
TP-Link_XXXX_5G
CHOOSE A NETWORK...
Other...
< Settings
Enjoy the internet!
Quick Installation Guide
Mobile Wi-Fi
* You can also find the default SSID and Wireless
Password on the product label under the battery.
* Please do not label the info card on the battery that
may aect the cooling of the battery.
SSID:
TP-Link_XXXX_5G
Wireless Password:
XXXXXXXXXXXXXXXXXXXX
Default Access:
http://tplinkmifi.net
Wi-Fi Info Card
Scan the QR code
to connect to the
Mobile Wi-Fi
QR
Code
!
The LEDs will turn o automatically after idling for 30 seconds. To check the LED
status, press the Power button to turn them on again.
On/O
StatusExplanation
Wi-Fi is enabled or disabled.
LED
(Internet)
Solid Green
Solid Red
Blinking Red
Blinking Green
O
(Power)
Mobile Wi-Fi has enough power or is fully charged.
The battery level is between 10% and 20%.
The battery level is lower than 10%.
Mobile Wi-Fi is charging.
Power is o.
(Wi-Fi)
a.Remove the back cover.b. Install your SIM card.
SIM
Slide and lift up
the cover.
Install your SIM
card.
Put down and slide
back the cover.
123
·SIM card requirement:
!
Nano
SIM card
Standard
SIM card
Micro
SIM card
SIM
d.Replace the back cover.c.Install the provided battery.
21
If you have a micro SD card, you can install it into the SD card slot for storage and media sharing.
!
Solid On/O
Blinking
Internet service is available or unavailable.
Mobile Wi-Fi has connected to network, but internet
service is unavailable.
FAQ (Frequently Asked Questions)
Safety Information
Charging Your Mobile Wi-Fi
!
·The Power LED will be solid green when the Mobile Wi-Fi is fully charged.
·
The power adapter is not provided by TP-Link.
Method 1
Via a Wall Outlet (Recommended)
Method 2
Via a Computer
Managing Your Mobile Wi-Fi
tpMiFi App
1. Get the app from App Store or Google Play, or by tpMiFi
scanning the QR code.
2. Connect your wireless device to the Mobile Wi-Fi.
3. Launch the tpMiFi app and create a password to log in.
Web Management Page
1. Connect your wireless device to the Mobile Wi-Fi. If it is a computer,
make sure it is set to obtain an IP address automatically.
2. Launch a web browser and visit http://tplinkmi.net or
http://192.168.0.1. Create a passwordto log in.
For technical support, user manuals and more information,
please visit https://www.tp-link.com/support or simply scan
the QR code.
Manage your Mobile Wi-Fi using any of the methods below. You can customize Wi-Fi settings, block Wi-Fi devices and more.
· Check the Data Roaming settings
If your SIM card is operated in a roaming service area, go to Advanced >
Dial-up Dial-up SettingsData Roaming> , enable and save the settings.
· Check Mobile Data
Go to Advanced Dial-up Dial-up SettingsMobile Data> > to verify that is
On. If not, enable it and save the settings.
· Check Data Limit
Go to Advanced Data Usage Settings> to check whether your data usage
has exceeded the Total/Monthly allowance.
Q2. How do I restore the Mobile Wi-Fi to its factory default settings?
A. With the Mobile Wi-Fi powered on, remove the cover, then use a pin to
press and hold the button until all LEDs turn on momentarily.Reset
Note: Restoring the device to its factory defaults will clear all your settings.
Q1. What should I do if I cannot access the internet (the Internet
LED is blinking or off)?
A. Log into the web management page (), and check http://tplinkmi.net
the following:
· Check PIN status
If the current SIM card status is , your SIM card is PIN PIN Locked
protected and you need to unlock it using the PIN code provided by your
mobile carrier.
· Verify the mobile carrier parameters
Go to Advanced Dial-up Dial-up Settings> > , then verify that the
parameters (i.e. APN, username and password) provided by your mobile
carrier are correct. If they are incorrect, enter the correct information or
create a new prole, then save the settings.
CAUTION!
Avoid replacement of a battery with an incorrect type that can defeat a safeguard.
Avoid disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a battery,
that can result in an explosion.
Do not leave a battery in an extremely high temperature surrounding environment that can result in
an explosion or the leakage of ammable liquid or gas. Do not leave a battery subjected to extremely
low air pressure that may result in an explosion or the leakage of ammable liquid or gas.
Risk of re or explosion if the battery is replaced by an incorrect type
or
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant
provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant
provisions of the Radio Equipment Regulations 2017.
The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca
· Keep the device away from water, re, humidity or hot environments.
·
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
·
Do not use the device where wireless devices are not allowed.
·
This equipment can be powered only by equipments that comply with Power Source Class 2 (PS2) or
Limited Power Source (LPS) dened in the standard of IEC 62368-1.
5V/1A
Product specificaties
| Merk: | TP Link |
| Categorie: | Router |
| Model: | M7400 |
Heb je hulp nodig?
Als je hulp nodig hebt met TP Link M7400 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden