TP Link KS230 V2 Handleiding

Bekijk gratis de handleiding van TP Link KS230 V2 (2 pagina’s), behorend tot de categorie Smarth home. Deze gids werd als nuttig beoordeeld door 54 mensen en kreeg gemiddeld 5.0 sterren uit 2 reviews. Heb je een vraag over TP Link KS230 V2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Set Up Your 3-Way Dimmer

STEP 2

SET UP

Tap the button in the app. Select Smart Switches

then . Then follow the app Smart 3-Way Dimmer

instructions to set up your smart dimmer.

Get the app from the App Store or Kasa Smart

Google Play.

DOWNLOAD APP

STE1P

OR

Label the wires in the two wallboxes.Traveler

3

Disconnect all wires from the two dumb switches, and connect them to the Smart 3-Way Dimmer as below.

7

Wire Your 3-Way DimmerBefore You Start

Turn o the circuit breakerThen remove . the two

wallplates. Your dumb switches might look like this.

1

Line (Live/Hot): Usually black. One end is connected to the circuit

breaker, the other to your 3-Way switch. FIRST

Load: Usually black. One end is connected to the light xture, the

other to your 3-Way switch. SECOND

Travelers: Usually one is black and the other is red.

Neutral: Usually a bundle of white wires, not connected to the dumb

switch. They may be folded up in the very back.

Ground: Usually green or copper.

Get to know the wires.

2

Two Traveler wires

(Opposite each other with

the same color screws.)

Line/Load wire

(Black. Line and Load wires

are in dierent boxes.)

3) Label the other wire in the other wallbox as the Load wire.

This is the wallbox for the satellite dimmer.

Identify the wires in the two wallboxes.Line and Load

5

1) the circuit breaker. Use a voltage detector to identify Turn on

the energized wire (). Line wire

2) the circuit breaker and label the wire. This is the Turn oLine

wallbox for the main dimmer.

Take care to avoid electric shocks.

Load wireLine wire

Label the wire in the wallbox for the main Neutral

dimmer, and the wires in both wallboxes.Ground

6

Disconnect the wires from the two Line/Load

switches, then cover them with the provided wire

nuts for safety.

4

Satellite Dimmer

Main Dimmer

Power SourceTo Light Bulbs

Electrical Cable

(Usually inside wall)

This means the wires are incorrectly connected. Please check the wiring. We recommend consulting an electrician.

1. Method of mounting: Independently mounted (Vertically

position only);

2. High Voltage - Disconnect power supply before servicing.

CAUTION:

The wire colors used in this guide are recommended

by the National Electric Code (NEC). Your actual wire

colors may vary.

The main and satellite dimmers cannot work

separately or with traditional 3-way switches.

The main and satellite dimmers are dierent and

should be installed in the correct wallboxes.

You can always nd detailed wiring instructions in the

Kasa Smart app.

OR

What should I do if the main dimmer LED blinks red quickly after installation?

Note: No need to distinguish between the two traveler wires.

Product specificaties