TP Link Kasa KE100 Handleiding

Bekijk gratis de handleiding van TP Link Kasa KE100 (3 pagina’s), behorend tot de categorie ivópalack. Deze gids werd als nuttig beoordeeld door 75 mensen en kreeg gemiddeld 4.1 sterren uit 3 reviews. Heb je een vraag over TP Link Kasa KE100 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Smart Thermostatic Radiator Valve

Quick Start Guide

Install Guide:

Scan QR code or visit

https://www.tp-link.com/support/faq/3404/

1. Set up a Kasa smart hub in the Kasa Smart app if you

haven’t already done so. You can get the app Kasa Smart

from the App Store or Google Play.

If you want to remotely control / manage the valve, you need to add a Kasa smart hub rst. You can adjust temperature manually.

After inserting the batteries, the valve is ready to use.

Rotate the valve to increase / decrease temperature.

OR

2. Use the provided cover-opener to press and hold the

SYNC/RESET button for 5 seconds to reset the valve.

3. Smart Open the Kasa Smart app, tap + and select

Thermostats. Follow the app instructions to pair the valve

and complete setup.

There are two types of valves: and .Thermostatic Manual

Kasa Smart Thermostatic Radiator Valve is only compatible with the thermostatic valve.

If your connector is , you can screw the new valve onto the radiator directly. M30 x 1.5

If not, check whether one of the provided adapters ts the connector. If your none of them t your

connector, please purchase a proper one yourself.

Thermostatic ValveManual Valve

1. 2. Check existing valve typeCheck the connector type

01 / Check Compatibility

03 / Install the Valve

04 / Set Up the Valve After InstallDon’t Have a Hub?

1. Install the valve rst before powering it up.

2. No need to shut o water before changing the radiator

valve. Water will not leak.

3. Avoid installing the valve in the same room where you

have installed the boiler thermostat.

4. Install the valve within range of your Kasa smart hub if you

wish to control it using the Kasa Smart app.

02 / Install Requirements

1. Unscrew the existing valve. Read the following instructions rst before installing

the new valve:

2. Screw the new valve directly (for M30 x 1.5 connector) or after installing

the proper adapter (for non-M30 x 1.5 connectors). The ▲ at the bottom

of the valve indicates the position of the display.

4. Open the battery cover and insert two AA LR6 Alkaline

batteries. Make sure the positive and negative

terminals face the correct direction.

3. Remove the cover of the valve by rotating

counterclockwise using the provided cover-opener.

*Do NOT use rechargeable batteries or 1.2V AA batteries.

M30 x 1.5

RAVL Adapter

RAV Adapter

RA Adapter

30mm

1.5mm

Vertical InstallationHorizontal Installation

SYNC/RESET

*Images may dier from your actual product.

Product specificaties