Totolink N200RE V3 Handleiding

Totolink Router N200RE V3

Lees hieronder de 📖 handleiding in het Nederlandse voor Totolink N200RE V3 (1 pagina's) in de categorie Router. Deze handleiding was nuttig voor 68 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Click . Select TOTOLINK N100RE, enter the WiFi
password shown on the product lable.
When connected, the Web page of TOTOLINK
N100RE will pop up automatically.
12 Try any website to test the Internet. Here we type in www.totolink.net.
Now the router’s Status interface turns up, it shows connected type
and IP address & DNS you get.
11
LAN2 LAN1
Hardware Installation
1. Please disconnect the power adapter and all cables during
thunderstorm weather;
2. Keep away from heat source and keep well ventilated;
3. Please pay attention to the waterproofing and moisture-proof
when storing, transporting and running.
4. The power adapter must be original or approved by TOTOLINK.
5. Put the router in flat places.
Set Up PC
Windows 10Windows Vi a/7st For Windows 10 Operating System, please comply with following steps to set up.
If you access Internet by ADSL, please comply with step 1, 2, 3 and 4 in below diagram in correct order; if you
access Internet by residential broadband, please comply with step 2, 3 and 4 to connect the WAN port of your
router with the residential broadband directly.
For Windows Vista or Windows 7 Operating System, please comply with following steps to set up.
Click
,
right-click ,
and choose .
Double-click
.
Choose
and ,
click ; And then click .
Quick Installation Guide
Mini Wireless N Router
NOTE:
Set Up Router
Please set up the router following below steps.
Run any Web browser.
Enter User Name and Password (the default User Name and Password
are ), then click or press Enter key.
For more information, please go to www.totolink.net
Type in the web browser, then press key.
Now you can see the interface.
Choose the and enter the parameters provided by
your .
Wireless Settings, you can change or retain your SSID (wireless network name).
7
Choose the encryption type. The WPA2-Mixed is recommended, then type
in your password (password length more than 8 characters).
8
Here we take PPPoE as example. You are required to enter the user
name and password.
Information in this document is subject to change without prior notice.
Note: For simplicity, we will take N100RE for example throughout this Guide.
By default, IPTV is disable, If this function, please enter the VLAN
ID and choose correct IPTV port. Then click to save the settings.
9
Wait for a while, Internet connected successfully! Please click .
10
LED Indicators
CPU
WIFI
1/ N2LA
WAN
Ligh on when rou er power ont t is .POWER
Ligh on when em wor ingt s i syst s s i k .
T cat Fi i .he indi or ligh ist on when Wi- s enabled
Ligh on when por onne ed ullt WAN t c ct su ecc ssf y.
Ligh blin ing while ran mi ing or re ei ing dat k t s tt c v ta.
Ligh on when he por ul onne edt t LAN t successf c ct .
Ligh blin ing while ran mi ing or re ei ing dat k t s tt c v ta.
Ports and Buttons Description
1/2LAN
WPS
RST
WAN
Us ter.ed f c tor onne ingct he power adap
DC IN
Us te o c C.ed f c tor onne ingct he rou r t lo al P
Us te o nt t.ed f c tor onne ingct he rou r t t Ihe erne
Press the button for about 2 seconds, the WPS function
enabled.
Use a pin to press and hold the RST button until all LEDs
turn off, the router will restore to factory default settings.
WPS
RST
Suitable for: N100RE, N200RE
Copyrigh OLINK All righ r erved. Website: http:/ w.toto k.netts TOT ts es /ww lin
V1.1608 Telephone
Wire
Telephone Wire
Telephone
Wire
Network
Cable
Network
Cable
ADSL Modem
Computer
Router
Splitter
Wall Socket
WPS: Press the WPS button for about 2 seconds, the system LED indicator
keep solid light, it means WPS working.
RST: Use a pin to press and hold the RST button for 5~8 seconds, all LEDs
blinks quickly, the device will restore to factory default settings.
N :OTE
After you set the Pre-Shared Key, please remember your SSID and the
Pre-Shared Key to connect with your wireless LAN.
Auto Pop-up Setting page for First Wi-Fi Devices Connection
FAQ
Forget the password?
4
How to reset the router to default settings?
1. Please make sure your router’s power is on regularly, then use a pin to
press the RST button for about 5~8s.
2. Loosen the button until your router’s LED lights all flashing, then you
have reset your router to default settings.
Please reset your router to default settings firstly, and set a new password.
The default IP:
The default User name:
The default Password:
→
Click ( )--- ---
--- ---
---
, right-click ,
and choose .
Double-click
.
Choose
and ,
click ; And then click .
N100RE
N100RE
N100RE
N100RE
N100RE
N100RE
N100RE


Product specificaties

Merk: Totolink
Categorie: Router
Model: N200RE V3

Heb je hulp nodig?

Als je hulp nodig hebt met Totolink N200RE V3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Router Totolink

Handleiding Router

Nieuwste handleidingen voor Router