Toa N-8050WP Handleiding

Bekijk gratis de handleiding van Toa N-8050WP (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen. Heb je een vraag over Toa N-8050WP of wil je andere gebruikers van dit product iets vragen? Stel een vraag

/ 2 PDF

INSTALLATION

MANUAL

DOOR STATIONN-8050DS

Designed to connect to the IP Intercom Exchange, the N-

8050DS is a door station featuring high quality hands-free

conversation and has a contact output (momentarily closed)

to remotely control an electronic door lock.

Using with an electrical box or surface mounting box, the

station can be mounted to a wall.

The N-8050DS is in full conformity with IP44 water-proof

and dust-proof standards. The operating temperature range

is –10 to +50°C.

As provided with guard nets inside to cover over the

openings of microphone and speaker, the N-8050DS can be

installed free from care in public space.

2. WALL MOUNTING

1. GENERAL DESCRIPTION

2.1. Mounting to a 3-gang Switch Box (with cover)

Mount the N-8050DS to electrical

boxes mounted in the wall.

Notes

•The wall should be over 12 mm thick, and the opening in

the wall for an electrical box should be under 115 mm

(wide) by 162 mm (high).

•When using for electronic door lock control, fix the N-

8050DS with tamper-proof screws such as "Torx" screws

to prevent it from being easily removed.

2.2. Mounting to the YS-13A Wall Mount Box

Install the YS-13A on a wall and mount the station in the

same way as 2.1.

4. WIRING

4.1. Connection to the Exchange

4.2. Connection to an External Relay

Connect the Exchange to the station's LINE terminals via

the E-7000TB Terminal Board as illustrated.

E-7000TB

Terminal board

Mini-clamp connector

(Supplied with the N-8000EX)

Twisted pair cable

N-8000EX/8010EX Exchange

16 lines

N-8050DS (rear panel)

LINEHC

Both upper and lower

terminals (clip terminals)

are internally connected.

N-8050DS

Wall

surface

Oval head combination screw

M4 x 25 (accessory)

3-gang electrical box

YC-150 (optional)

The N-8050DS comes with 2 types of screws: oval head

combination screw M4 x 25 and oval head slotted screw

UNC No.6 x 18.

For the electrical box provided with unified threads, use the

oval head slotted screws UNC No.6 x 18.

Accessory screws

Open collector output: 30 V DC, 50 mA

External

power supply

Relay

Diode

N-8000EX/8010EX Exchange

+24 V DC

GND

+

-

N-8050DS (Rear panel)

LINEHC

3. INSTALLATION PRECAUTIONS

•When installing the N-8050DS

outdoors or at locations where it gets

wet with water, tightly seal the panel

edges. Besides, provide a weep hole

at the underside of the mounting box

to permit water to drain off.

•When installing the N-8050DS under

difficult environmental conditions

such as in coastal areas or at humid

locations, cover the inside of the N-

8050DS with coating. For the coating

method, consult your TOA dealer.

Seal the panel edges.

N-8050DS's

front panel

Product specificaties