Toa D-911 Handleiding

Toa Niet gecategoriseerd D-911

Lees hieronder de 📖 handleiding in het Nederlandse voor Toa D-911 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Thank you for purchasing TOA's D-911 VCA Fader unit.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

D-911D-911 VCA FADER UNIT

INSTRUCTION MANUAL

1. GENERAL DESCRIPTION

The D-911 VCA Fader Unit is designed to be used in

conjunction with the D-901 Digital Mixer. Connecting to the

D-984VC VCA Control Module permits volume adjustment

of all the channels and contact controls of the D-901 Mixer.

2. HANDLING PRECAUTIONS

• The D-911 Fader Unit is connected to the VCA control

modules mounted in the D-901 Digital Mixer. Connect

each of eight terminals to

the D-984VC's terminal of

the same name by way of

the fully-connected straight

cable as shown on the

right.

• Use the D-901 firmware of version 3.0 or later. Firmware

versions earlier than it cannot be used in conjunction with

the fader unit.

The firmware version number can be confirmed on the D-

901's front panel-mounted display.

3. BLOCK DIAGRAM

[Connection]

1 81 8 ––

T O A D - 9 0 1 S e r i e s

S o f t w a r e V e r 3 . 0 0

[Display example]

VCA

IN CH 1-6

VCA

IN CH 7-12

VCA

OUT CH 1-4

VCA

OUT CH 5-8

CTRL

IN 1-4

CTRL

OUT 1-4

CTRL

IN 5-8

CTRL

OUT 5-8

1 6

7 12

1 4

5 8

1 4

Make contact

5 8–

Same as above

4. SPECIFICATIONS

• Accessories

Fader knob (Red, Yellow)*............................ 3 each

Volume knob (Red)*.............................................. 2

Rack mounting screw ............................................. 4

Rack mounting fiber washer .................................. 4

Rack mounting bracket (preinstalled on the unit) ... 2

* Convenient for color coding to distinguish

channels to which stereo link or group

settings are assigned.

Note

The design and specifications are subject to

change without notice for improvement.

Power Supply 5 V DC (supplied from the optional D-984VC)

Connector RJ45 connector x 8

Input Fader Control Input fader (100 mm) x 12

Output Volume Control Output volume control x 8

Contact Control Illuminated switch x 8

Remote Output No-voltage make contact output

(contact capacity: 30 V DC, 4 A)

Remote Switch Seesaw switch for activating the remote function of the

power distributor

Finish Panel: Pre-coated steel plate, black (30% glossy)

Dimensions 482.6 (w) x 177 (h) x 61.3 (d) mm

(excluding projection)

Weight 2.7 kg

If your firmware version is old, download the latest

software program and the "D901 PC software instruction

manual" from the TOA Internet product data site

[http://www.toa-products.com/]. For the update

procedure, refer to the instruction manual.

• For channels with stereo link or group settings

established at the D-901, the lowest numbered channels

in the stereo linked or grouped channels are enabled.

• Control's knob position 10 of the D-911 provides the

channel gain set by the D-901. As a guide, knob position

8 provides about 10 dB below the gain set by the D-901.

Printed in Japan

133-12-943-40

1. Input volume controls

Adjust the volume of connected input equipment, such

as a microphone and CD player. Knob position 0

reduces the volume to its lowest setting and position 10

increases the volume to its highest setting.

2. Control keys

Used to recall preset memories or perform contact

controls. These keys light when the preset memory is

recalled or the contact turns on. (Functions can be

assigned to the contacts at the D-901.)

3. Remote (Activation) switch

Setting this switch to the ON position closes the Remote

(activation) output terminals on the rear panel, and

setting this switch to the opposite side opens the output.

4. Output volume controls

Adjust the output volume.

5. Name indication spaces

Used to indicate input and output names, preset

memory contents, and other features for convenience of

operation.

(Example: CD player)

5. NOMENCLATURE AND FUNCTIONS

[Front]

[Rear]

1 2 3 4

6 7

6. Remote (activation) output terminals

Setting the Remote (activation) switch (3) to the ON

position closes the output.

7. VCA control module connection terminals

These terminals are used exclusively for the D-984VC

VCA Control module. Use an RJ45 connector for

connection. Avoid connecting any other than the D-

984VC to these terminals.

Product specificaties

Merk:	Toa
Categorie:	Niet gecategoriseerd
Model:	D-911
Kleur van het product:	Zwart, zilver
Gewicht:	2700 g
Breedte:	482.6 mm
Diepte:	61.3 mm
Hoogte:	177 mm
Soort:	Schuifvolumeregelaar
Materiaal behuizing:	Metaal
Rack-montage:	Ja
RJ-45 ports hoeveelheid:	8
Aantal kanalen:	- kanalen
Stroomverbruik (typisch):	- W
Ingang operation voltage (max):	5 V
Power handling:	- W