Thermex Caremex Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Thermex Caremex (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
USER MANUAL
CAREMEX HYGIENE STATION
Please read user manual carefully before using.
LED Indicator
Control Box
1. Remove the lid from the drain tank
2. Take out the drain tank and clean
the liquid residual inside
Mind the installation
direction of base plate
Front
Parts List
Sensor Type
Product Name
Sensor Range 2~12cm
Aluminum+Iron Sheet Metal+ABS
5L
Liquid Volume Adjustor
Suitable Liquid
Capacity
SprayLiquid Output
4 pcs AA alkaline batteries
(not included)
Liquid alcoholicity: 75%
1: 0.3ml 2: 0.6ml
Caremex Hygiene Station
Infrared Sensor
Material
Battery
Power Adapter Input Voltage: AC100-240V 50/60Hz
Output Voltage: DC6.0V0.8A
Specification
Top Cover Lock
Base Plate
Liquid Tube Connecter
Power / Liquid Adjust Switch
Battery Chamber
Drain Tank
Sensor Zone
Liquid Outlet
Top Cover
-1-
Back
Back Door Lock
Liquid Tube
5L Liquid Tank
Back Door
Tank Mouth
1190mm
500mm
260mm
390mm
205mm 140mm
Adapter Socket
Installation
Pre-Operation
FM4*13 Screw
(Not included screwdriver
※The side with screw hole concavity should be placed facing outward
-2-
Unlock the back door, unscrew
the tank cap to take out the tank
for refilling then place it back.
Unlock the top cover to
take out the control box
for battery loading.
Turn on the power and set the
liquid spray volume, there are
two setting.
I small volume: 0.3ml
II large volume: 0.6ml
Replace the control box back inside
then replug the tube in, please make
sure the liquid nozzle is at the right
location.
Lock the top cover.
Place the product horizontally, put the base plate corresponding to the position
of 2 guide posts at the bottom of product.
Install 4 screws to fixate the base plate onto the product, please mind the
installation direction of base plate to make sure an even bottom.
Guide Posts
Filter Valve
1Move the product to stand.
3
2
1 2 Unplug the tube then take
out the whole control box.
3
5
1. Open the battery cap by
pressing the buckle to the left
then insert 4 "AA" batteries
according to the right direction.
2. Connect the DC wire onto
the power port on the right
side of control box.
46
7
Press
down


Product specificaties

Merk: Thermex
Categorie: Niet gecategoriseerd
Model: Caremex

Heb je hulp nodig?

Als je hulp nodig hebt met Thermex Caremex stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Thermex

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd