Thermaltake U Comfort Handleiding

Bekijk gratis de handleiding van Thermaltake U Comfort (2 pagina’s), behorend tot de categorie Gamestoel. Deze gids werd als nuttig beoordeeld door 45 mensen en kreeg gemiddeld 4.7 sterren uit 5 reviews. Heb je een vraag over Thermaltake U Comfort of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Place Screws in X-Pattern

5

VER1.0

5

INSTALLATION GUIDE

Seat Back X 1 Seat Base X 1 Mechanism X 1 Five-star base X 1 Caster wheels X 5 Gas lift piston,

Piston cover X 1

Lumbar Lumbar Headrest

cushion X 1 cushionX 1 cushion X 1

U Comfort series U Fit series

Side Cover X 2

M8 screw X 8 （Pre-mounted）

Plastic Plug X 2 M8 Hex Allen key X 1 M5 screw X 2

Attention

STEP by STEP

Please make sure the angle of the adjuster on the seat base is set at 90 degrees (As shown in )

1.Install the caster wheels, gas lift piston and

piston covers onto the 5-star base.Please

note: when installing the caster wheels, hold

the wheels at a 90-degree with a firm grip

of the hand; and do not use tools to knock

it into place or the ground as to prevent

damage.Detailed installation methods can

be found on the official website：

（www.thermaltake.com）

2.Take out the M8 screws and install the seat

back onto the seat base.

3.Use M8 allen key to screw the seat back onto

the seat base.

4.Align the rubber cover of the backrest with

the hole and lock with a M5 hexagonal screw.

5.Mount the mechanism underneath the seat

base using 4x M8 screws. Please note: The

screws for the mechanism have been tightened

underneath the seat base and needs to be

removed and reattached via the provided allen

key upon mechanism placement.

6.Attach the 5-star base with gas lift piston onto

the notch of the mechanism that has now been

attached to the seat base.

NOTE : Place the screws by hand before

tightening them in an X-Pattern with the

allen key.

ACCESSORIES

Product specificaties