Thermaltake ARGENT E700 Handleiding

Thermaltake Gamestoel ARGENT E700

Lees hieronder de 📖 handleiding in het Nederlandse voor Thermaltake ARGENT E700 (11 pagina's) in de categorie Gamestoel. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11

Test Report

No.SDHL2107011715FT-01 Date: Jul 27, 2021 Page 1 of 11

THERMALTAKE TECHNOLOGY CO., LTD.

5F, NO.185, SECTION 2, TIDING BOULEVARD, NEIHU DISTRICT, 114, TAIPEI, TAIWAN

Sample Description :

ARGENT E700 GAMING CHAIR

As above test item and its relevant information regarding to the submission are provided and confirmed by the

applicant. SGS is not liable to either the test item or its relevant information, in terms of the accuracy, suitability,

reliability or/and integrity accordingly.

************

Sample Receiving Date :

Jun

30, 2021

Test Performing Date :

l 01, 2021 to Jul 20, 2021

Test Performed :

Selected test(s) as requested by applicant

Test Result Summary

No. Test(s) Requested Result(s) Comments

1 ANSI/BIFMA X5.1-2017 (Type I, III) PASS /

For further details, please refer to the following page(s)

Signed for and on behalf of

SGS-CSTC Standards Technical Services Co., Ltd. Shunde Branch

Bill Wang

Authorized Signatory

Test Report No.SDHL2107011715FT-01 Date: Jul 27, 2021 Page 2 of 11

TESTS AND RESULTS

Test Conducted:

ANSI/BIFMA X5.1-2017 General-Purpose Office Chairs – Tests.

No. of Sample:

1 piece. For more sample information and pictures, please refer to the following page.

Chair Type: Type I, III.

Test and Requirements Test Results

Safety, Durability and Structural Adequacy

5 Backrest Strength Test - Static - Type l and II

5.4.1 Functional Load

There shall be no loss of serviceability to the chair when 667 N (150 lbf.) is applied to

the backrest at the specified position for one (1) minute. With the backrest at its back

stop position, apply a force that is initially 70 degrees ± 10 degrees to the plane of the

backrest. The force is not intended to be maintained at 70 degrees ± 10 degrees

throughout the loading of the backrest.

PASS

5.4.2 Proof Load

There shall be no sudden and major change in the structural integrity of the chair, loss

of serviceability is acceptable, when 1001 N (225 lbf.) is applied to the backrest at the

specified position for one (1) minute. With the backrest at its back stop position, apply a

force that is initially 70 degrees ± 10 degrees to the plane of the backrest. The force is

not intended to be maintained at 70 degrees ± 10 degrees throughout the loading of

the backrest.

PASS

6 Backrest Strength Test - Static - Type lll

6.4.1 Functional Load

There shall be no loss of serviceability to the chair when 667 N (150 lbf.) is applied to

the backrest at the specified position for one (1) minute. With the backrest at its back

stop position, apply a force that is initially 90 degrees ± 10 degrees to the plane of the

backrest. The force is not intended to be maintained at 90 degrees ± 10 degrees

throughout the loading of the backrest.

PASS

6.4.2 Proof Load

There shall be no sudden and major change in the structural integrity of the chair, loss

of serviceability is acceptable, when 1001 N (225 lbf.) is applied to the backrest at the

specified position for one (1) minute. With the backrest at its back stop position, apply a

force that is initially 90 degrees ± 10 degrees to the plane of the backrest. The force is

not intended to be maintained at 90 degrees ± 10 degrees throughout the loading of

the backrest.

PASS

7 Drop Test - Dynamic

7.4.1 Functional Load Test

There shall be no loss of serviceability when a test bag weighing 102 kg (225 lb.) is

free fell from 152 mm (6 in.) above the uncompressed seat to the specified position on

seat. Remove the bag, and set height to its lowest position and repeat the test for

chairs with seat height adjustment features.

PASS

Test Report No.SDHL2107011715FT-01 Date: Jul 27, 2021 Page 3 of 11

Test and Requirements Test Results

7.4.2 Proof Load Test

There shall be no sudden and major change in the structural integrity of the chair. Loss

of serviceability is acceptable when a test bag weighing 136 kg (300 lb.) is free fell from

152 mm (6 in.) above the uncompressed seat to the specified position on seat.

Remove the bag, and set height to its lowest position and repeat the test for chairs with

seat height adjustment features.

PASS

8 Swivel Test – Cyclic

There shall be no loss of serviceability after 60,000cycles of rotation (360°) at a rate

between 5 and 15 rotations per minute under a 122 kg (270 lb.) load on the seat. If the

seat height is adjustable set the height to its lowest position, for all chairs, continue the

test for an additional 60,000 cycles to a total of 120,000 cycles.

PASS

9 Tilt Mechanism Test – Cyclic

There shall be no loss of serviceability to the tilt mechanism after 300,000cycles at a

rate between 10 and 30 cycles per minute under a 109kg (240lbs.) load to the center of

the seat.

Note: This test shall be performed on Type I and Type II chairs with tilting backrests.

PASS

10 Seating Durability Tests – Cyclic

10.3 Impact Test

There shall be no loss of serviceability to the chair after a test bag weighing 57kg

(125lbs.) is free fell from 36 mm (1.4 in.) above the uncompressed seat to the specified

position on seat for 100,000 cycles.

The drop height and/or seat height shall be adjusted during the test if the drop height

changes by more than 13 mm (0.5 in.). The cycling device shall be set at a rate

between 10 and 30 cycles per minute.

Note: Chairs with less than 44 mm (1.75 in.) of cushioning materials in the seat shall

have foam added to bring total cushioning thickness to 50 mm ± 6 mm (2 in. ± 0.25 in.).

Any additional foam added to the top of the seat shall have a 25% Indentation Force

Deflection (IFD) of 200 N ± 22 N (45 lbf. ± 5 lbf.). Flexible seat surfaces (i.e., mesh,

flexible plastic, etc.) are not considered cushioning materials.

PASS

10.4 Front Corner Load-Ease Test – Cyclic – Off-center

After completing the impact test, alternately apply a load of 890 N (200 lbf.) through a

203 mm ± 13 mm (8 in. ± 0.51 in.) diameter loading device at one front corner flush to

each structural edge at a rate of 10 to 30 cycles per minute for 20,000 cycles.

Reposition the load to the other front corner, and perform the test for an additional

20,000 cycles.

There shall be no loss of serviceability to the chair after completion of both the impact

and load-ease tests. If applicable, the chair base (center structure) shall not touch the

test platform as a result of the impact loads.

Note: Applying the loads in an alternating sequence to attain a total of 40,000 cycles is

an acceptable method of performing this test.

PASS

11 Stability Tests

Product specificaties

Merk:	Thermaltake
Categorie:	Gamestoel
Model:	ARGENT E700
Breedte:	620 mm
Diepte:	480 mm
Minimale lengte gebruiker:	170 cm
Maximale lengte gebruiker:	190 cm
Aantal wielen:	5 wiel(en)
Aantal per verpakking:	1 stuk(s)
Frame materiaal:	Aluminium, Metal
Kleur onderkant:	Zilver
Montage vereist:	Ja
Type product:	PC-gamestoel
Zwenkwieltjes:	Ja
Maximum gewicht gebruiker:	150 kg
Hoofdsteun:	Ja
Wieldiameter:	7.5 mm
Basismateriaal:	Aluminium
Kleur zitting:	Zwart
Kleur rugleuning:	Zwart
Armsteun:	Ja
Verstelbare armleuning:	Ja
Verstellingstype armleuning:	4D-armleuning
Inclusief racestuur/vliegstand:	Nee
Zitbreedte:	460 mm
Verstelbare hoofdsteun:	Ja
Zithoogte (max):	530 mm
Zithoogte (min):	410 mm
Materiaal rugleuning:	Leer
Materiaal van de zitting:	Leer
Schuimdichtheid:	Hoge dichtheid
Gaslift-klasse:	4
Hoogte rugleuning:	850 mm
Breedte rugleuning:	620 mm
Armsteunbreedte:	240 mm
Kantelbeveiliging:	Ja