Thermaltake Pacific G1/4 Handleiding

Bekijk gratis de handleiding van Thermaltake Pacific G1/4 (2 pagina’s), behorend tot de categorie Hardwarekoeling. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.5 sterren uit 5 reviews. Heb je een vraag over Thermaltake Pacific G1/4 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

© 2015 Thermaltake Technology Co., Ltd. All Rights Reserved. www.thermaltake.com

20mm

20mm

This product is intended for installation only by expert users. Please consult with a qualified technician for

installation. Improper installation may result in damage to your equipment.

1. Please carefully read the manual before beginning the installation process !

2. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000.

3. DO NOT USE any kind of alcohol or alcohol derivatives with this reservoir or the acrylic tube may crack

and fail ! Do not clean it using alcohol either !

Due to the water temperature differences between operation

and standby mode, high pressures may develop within your

loop. In order to help continuously equalize the internal

pressure of your loop and the ambient pressure, Thermaltake

Pacific series reservoir/pump combos come with the

following pressure relief kit.

Reservoir with vertical orientation

Reservoir with horizontal orientation

Pacific

Pressure

Equalizer

Plug

Pressure Equalizer Plug

Ax1

Bx1

Cx1

Dx 1

Parts List

General Information

Thermaltake pacific pressure equalizer plug

is designed to beinstalled on top of your

reservoir if you reservoir is in vertical

orientation. The pressure equalizer plug

allows air and pressure to automatically

pass through the fitting preventing pressure

buildup in your loop.

Thermaltake pacific pressure equalizer plug is designed to be installed on the highest

point of your loop allowing air and pressure to pass through the fitting preventing

unnecessary pressure buildup. To properly exhaust the air out of your loop, you will

need to install a compression fitting and a fill port on any of the ports located on the

reservoir. Then mount the pressure equalizer plug to your fill port while keeping the

pressure equalizer plug at the highest possible point in your system.

A

A

C

D

B

Pressure

equalizer plug

Pressure equalizer plug

Pressure

equalizer plug

Pacific 1/2” ID x 3/4”

OD Compression

Pacific 1/2” ID x 3/4”

OD Compression

Pacific 1/2”

Fill-port

Pacific 1/2”

Fill-port

V-Tubler 4T 1/2” OD,

3/4”ID 100mm

V-Tubler 4T 1/2” OD,

3/4”ID 100mm

Caution

1. Do not soak the pressure equalizer

plug in water / coolant

2. Please drain your loop and seal the

fill port with stop plug before

transporting your PC

Caution

1. Do not soak the pressure equalizer plug in

water / coolant

2. Please drain your loop and seal the fill port

with stop plug before transporting your PC

Product specificaties