Texas Instruments SN74HC367N Handleiding

Texas Instruments Niet gecategoriseerd SN74HC367N

Lees hieronder de 📖 handleiding in het Nederlandse voor Texas Instruments SN74HC367N (27 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/27

SNx4HC367 Hex Buffers and Line Drivers with 3-State Outputs

1 Features

• Wide operating voltage range of 2 V to 6 V

• High-current 3-state outputs drive bus lines, buffer

memory address registers, or drive up to 15

LSTTL loads

• True outputs

• Low power consumption, 80-μA max ICC

• Typical tpd = 10 ns

• ±6-mA output drive at 5 V

• Low input current of 1µA max

2 Description

The SNx4HC367 is a hex buffer with 3-state outputs.

The device is configured into two banks, one with four

drivers and one with two drivers, each controlled by its

own output enable pin.

Device Information

PART NUMBER PACKAGE(1) BODY SIZE (NOM)

SN54HC367J CDIP (16) 24.38 mm × 6.92 mm

SN74HC367D SOIC (16) 9.90 mm × 3.90 mm

SN74HC367N PDIP (16) 19.31 mm × 6.35 mm

SN74HC367NS SO (16) 6.20 mm × 5.30 mm

SN74HC367PW TSSOP (16) 5.00 mm × 4.40 mm

(1) For all available packages, see the orderable addendum at

the end of the data sheet.

1OE 1

1A1 21Y1

2OE 15

2A1 12 2Y1

1A2

1Y2

1A3

1Y3

1A4 91Y4

2A2

2Y2

Functional Block Diagram

SN54HC367, SN74HC367

SCLS309E – JANUARY 1996 – REVISED MARCH 2022

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,

intellectual property matters and other important disclaimers. PRODUCTION DATA.

Table of Contents

1 Features............................................................................1

2 Description.......................................................................1

3 Revision History.............................................................. 2

4 Pin Configuration and Functions...................................3

5 Specifications.................................................................. 4

5.1 Absolute Maximum Ratings........................................ 4

5.2 Recommended Operating Conditions(1) ..................... 4

5.3 Thermal Information....................................................4

5.4 Electrical Characteristics.............................................5

5.5 Switching Characteristics ...........................................5

5.6 Operating Characteristics........................................... 6

6 Parameter Measurement Information............................ 7

7 Detailed Description........................................................8

7.1 Overview.....................................................................8

7.2 Functional Block Diagram........................................... 8

7.3 Device Functional Modes............................................8

8 Power Supply Recommendations..................................9

9 Layout...............................................................................9

9.1 Layout Guidelines....................................................... 9

10 Device and Documentation Support..........................10

10.1 Documentation Support.......................................... 10

10.2 Receiving Notification of Documentation Updates..10

10.3 Support Resources................................................. 10

10.4 Trademarks.............................................................10

10.5 Electrostatic Discharge Caution..............................10

10.6 Glossary..................................................................10

11 Mechanical, Packaging, and Orderable

Information.................................................................... 10

3 Revision History

NOTE: Page numbers for previous revisions may differ from page numbers in the current version.

Changes from Revision D (September 2003) to Revision E (March 2022) Page

• Updated the numbering, formatting, tables, figures, and cross-references throughout the doucment to reflect

modern data sheet standards............................................................................................................................. 1

SN54HC367, SN74HC367

SCLS309E – JANUARY 1996 – REVISED MARCH 2022 www.ti.com

Product Folder Links: SN54HC367 SN74HC367

4 Pin Configuration and Functions

J, D, N, NS, or PW package

16-Pin CDIP, SOIC, PDIP, SO, or TSSOP

Top View

www.ti.com

SN54HC367, SN74HC367

SCLS309E – JANUARY 1996 – REVISED MARCH 2022

Product Folder Links: SN54HC367 SN74HC367

Product specificaties

Merk:	Texas Instruments
Categorie:	Niet gecategoriseerd
Model:	SN74HC367N
Breedte:	19.69 mm
Diepte:	6.6 mm
Hoogte:	4.57 mm
Breedte verpakking:	13.97 mm
Diepte verpakking:	506 mm
Hoogte verpakking:	11.23 mm
Soort:	Logic IC
Type verpakking:	PDIP
Aantal per verpakking:	25 stuk(s)
Temperatuur bij opslag:	-65 - 150 °C
Bedrijfstemperatuur (T-T):	-40 - 85 °C
Aantal pinnen:	16
Breedte (met pennen):	19.69 mm
Diepte (met pennen):	10.92 mm
Hoogte (met pennen):	8.26 mm