Texas Instruments MCF8329A-Q1 Handleiding


Bekijk gratis de handleiding van Texas Instruments MCF8329A-Q1 (208 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.6 sterren uit 2 reviews. Heb je een vraag over Texas Instruments MCF8329A-Q1 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/208
MCF8329A-Q1 Automotive Sensorless Field Oriented Control (FOC) Three-phase
BLDC Gate Driver
1 Features
AEC-Q100 qualified for automotive applications
Temperature Grade-1 : –40°C ≤ TA ≤ 125°C
Three-phase BLDC gate driver with integrated
sensorless motor control algorithm
Code-free Field Oriented Control (FOC)
Speed, current, power or voltage control modes
Forward and reverse windmilling support
Analog, PWM, freq. or I
2
C based control input
External MCU watchdog monitoring
5-point configurable reference profile support
Anti-voltage surge and active braking to prevent
DC bus overvoltage
Flux weakening for high speed operation
Maximum torque per ampere (MTPA) for higher
efficiency
65V Three phase half-bridge gate driver
Drives 3 high-side and 3 low-side N-Channel
MOSFETs, 4.5 to 60V operating voltage
Supports 100% PWM duty cycle
Bootstrap based gate driver architecture
1A/2A peak source/sink current
Integrated current sense amplifier
Adjustable gain (5, 10, 20, 40V/V)
Low power sleep mode
5µA (maximum) at V
PVDD
= 24V, T
A
= 25°C
Speed loop accuracy: < 3% with internal clock
Configurable EEPROM
Support up to 75kHz PWM switching frequency
LDO: 3.3V ± 3%, 50mA
Independent driver shutdown path (DRVOFF)
Spread spectrum for EMI mitigation
Suite of integrated protection features
Undervoltage protection on all supply rails
Loss of phase (no motor) detection
Short-circuit protection (VDS) for all 6 FETs
Motor lock detection
Thermal shutdown (TSD)
Fault indication on nFAULT pin
Optional fault diagnostics over I
2
C interface
2 Applications
Fuel and oil pumps
Automotive thermal management
Coolant and water pumps
HVAC blowers
Engine and battery cooling fans
Automotive body motors
Sunroof modules, Wiper modules
Zonal modules
3 Description
The MCF8329A-Q1 provides a single-chip, code-
free sensorless FOC solution for driving 12V or
24V automotive brushless-DC motors (BLDC) or
Permanent Magnet Synchronous motors (PMSM)
up to 1.8kHz (electrical speed). The MCF8329A-Q1
provide three half-bridge gate drivers, each capable
of driving high-side and low-side N-channel power
MOSFETs. The device generates the appropriate gate
drive voltages and drives the high-side MOSFETs
using a bootstrap circuit. A trickle charge pump is
included to support 100% duty cycle. The gate drive
architecture supports peak gate drive currents up
to 1A source and 2A sink. The MCF8329A-Q1 can
operate from a single power supply and supports a
wide input supply range of 4.5 to 60V.
The algorithm configuration can be stored in non-
volatile EEPROM, which allows the device to operate
stand-alone once it has been configured. There are a
large number of protection features integrated into the
MCF8329A-Q1, intended to protect the device, motor,
and system against fault events.
MCF8329A-Q1 is available in a 32-pin, 0.5mm pin
pitch, 6x4mm, wettable flank WQFN package (RRY).
Device Information
(1)
PART NUMBERPACKAGEBODY SIZE (NOM)
MCF8329A1IQRRYRQ1WQFN (32)6.00mm × 4.00mm
(1)For all available packages, see the orderable addendum at
the end of the data sheet.
Documentation for reference:
Refer MCF8329A-Q1 EVM
Refer MCF8329A-Q1 GUI (Motor Studio)
MCF8329A-Q1
3-Phase Pre-Driver
LDO Regulator
Integrated Current
Sense Ampli
er
DIR
I
2
C
Op
onal during opera
on;
speed, diagnos
cs, or on-
the-
y con
gura
on
Analog, PWM, frequency or
commanded over I
2
C
SPEED
FG
Speed feedback
nFAULT
A
B
C
4.5 to 60V
LDO out
3.3V, up to 50mA
Bootstrap Architecture
Charge pump
N-Channel
MOSFETs
Gate Drive
Current
sense
EEPROM
Sensorless
FOC
Simplified Schematic
MCF8329A-Q1
SLLSFV1 – MARCH 2025
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.

Beoordeel deze handleiding

4.6/5 (2 Beoordelingen)

Product specificaties

Merk: Texas Instruments
Categorie: Niet gecategoriseerd
Model: MCF8329A-Q1

Heb je hulp nodig?

Als je hulp nodig hebt met Texas Instruments MCF8329A-Q1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden