Tenda IC6-LRS Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Tenda IC6-LRS (9 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
4MP Conch Security Camera
IC Series
Quick Installation Guide
Please read this guide before you start with the quick setup for this camera upon the first use.
For product or function details, please go to www.tendacn.com to download the user guide.
IC7-LRS-4 is used for illustrations here unless otherwise specified. The actual product prevails.
Anchor: Height 6.6 mm, inner diameter 2.4 mm,
length 26.4 mm
Screw: BM3.0*5 mm (Head diameter: 6.0 mm)
Installation template×1Camera×1
Installation package x 1Quick installation guide×1
- 1 -
Appearance
Package contents
When the arrow is at 12 o'clock
position, the monitoring direction is
the positive direction.
−If the camera supports the IEEE
802.3af standard, this port can be
connected to the PoE port of a PoE
power sourcing equipment for power
supply.
−If the camera does not support
standard PoE, this port can be
connected to routers, switches, etc.
Microphone
Ethernet port, 10/100 Mbps
auto-negotiation
Use the power adapter to power on
the camera. Power-related parameters
can be found on the label attached to
the device.
Power jack
4MP Conch Security Came ra
IC Series
Pleas e re ad this g uide be fore you s tart with the q uick s e tup for t h is camera upo n the firs t us e .
For product or fu nct ion detai ls , pleas e go to w ww.t endacn.co m to download the u s e r guide.
IC7-LRS-4 is us e d for i llustration s he re unle ss ot he rwise s p e cified. The a ct ual product prevails.
Quick Installation Guide
- 2 -
➊ ➋
Install the device
Remove the base
Tips
Base notch
Housing slot
Installation template
Rotate the body of the camera, align the housing slot with any base notch, and then use
a screwdriver to pry the housing at the slot to remove the base.
Install the camera
The camera supports ceiling and wall installation. The ceiling installation is taken as an
example here.
Anchor
− Please make sure the ceiling is strong enough to withstand three times the weight of the camera.
− You may need to prepare a hammer drill, a drill bit, a rubber hammer, a screwdriver, and a ladder for
the installation.


Product specificaties

Merk: Tenda
Categorie: Niet gecategoriseerd
Model: IC6-LRS

Heb je hulp nodig?

Als je hulp nodig hebt met Tenda IC6-LRS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Tenda

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd