Tascam HS-P82 Handleiding

Tascam Hifi systeem HS-P82

Lees hieronder de 📖 handleiding in het Nederlandse voor Tascam HS-P82 (16 pagina's) in de categorie Hifi systeem. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
TASCAM HS-P82 1
HS-P82
D01166720C
New functions in firmware V2.00
The following new functions have been added in rmware V2.00
• Operation when the page item is set to REC MODE REC Mode
Mirror has been improved.
• If the page item is set to and mirror REC MODE REC Mode Mirror
recording is enabled, when a take is deleted, or RENAME DELETE
can be selected as the operation for the take on the other, non
current CF card.
• When changing the name of a take recorded at the same time as
a stereo mix (LR 2mix), the name of the stereo mix le (~_ST.wav)
will also be changed now.
• In order to prevent accidentally interrupting recording, a function
that requires pressing and holding the button to stop recording
has been added.
• A mode that shows the TC generator time has been added TC GEN
to the Home Screen time display modes.
• A pull-down menu is now used to change the Home Screen time
display mode.
• Pressing the take name button on the Home Screen opens
a pull-down menu item, allowing the operations on it to be
executed easily.
• Shortcut key functions for connected keyboards have been
added.
• A setting has been added to the Bit Length CREATE PROJECT
screen. Along with this, the screen has been CREATE PROJECT
expanded to three pages, and a button now CREATE PROJECT
appears on every page.
Contents
New functions in firmware V2.00 1 ......................................................
Improved operation when the REC MODE page REC
Mode item is set to Mirror 2 ............................................................
Mirror DELETE MODE setting added 2 ........................................
Changing the names of a take recorded at the same time
as a stereo mix (LR 2mix) 3 ...............................................................
Function added requiring buttons to be pressed and
held to stop recording 3 ...................................................................
TC GEN time display mode added 4 .............................................
New way to change the Home Screen time display mode
...4
Pull-down menu added to Home Screen take name button
....4
Shortcut key functions for connected keyboards added
....4
Bit Length setting added to the CREATE PROJECT screen
...4
New pop-up messages added for firmware V2.00 5 ..............
New functions in firmware V1.20 5 ......................................................
Line Input Trim function 6 ...............................................................
Take Rename function 6 ...................................................................
TC SYNC REC function 6 ....................................................................
New pop-up message added in HS-P82 V1.20 6 .....................
New functions in firmware V1.10 7 .....................................................
Mirror recording function added 7 ...............................................
Recording times when set to mirror recording 9 ....................
Slate on status can now be retained 9 ........................................
Addition of take end time code display 9 ..................................
New pop-up messages added in HS-P82 V1.10 10 ................
New functions added in firmware V1.04 11 ....................................
Mid-side (MS) microphone connection mode added 11 .....
Trim group function addition 12 ..................................................
Zero trim function added 12 ..........................................................
Firmware V1.02 new functions 13 .......................................................
Changing the term “scene” to “folder” ................................... 13
Addition of project number, folder number and take
number indications 14 .....................................................................
Addition of a date input button 14 ..............................................
Next Take Name editing function added 15 .............................
Mono file recording folder selection 15 ....................................
Limitations to recording operations 16 ......................................
Change of the default reference level 16 ...................................
HS-P82
2 TASCAM HS-P82
Improved operation when the REC MODE page
REC Mode item is set to Mirror
Operation when the page item is set to REC MODE REC Mode Mirror
has been improved.
• Projects and scenes with the same names are now always created
on both CF cards.
• When the name of a take or current project is changed, the name
of the take or current project on the other, non-current CF card
will also be changed now.
• Retaking (SHIFT + STOP keys) now will also retake the take on the
other, non-current CF card.
• The following has been added as a condition that disables
mirror recording (see "Mirror recording function added" in "New
functions in rmware V1.10").
• When a project exists on the non-current CF card that has the
same name as the current project but with dierent sampling
frequency or timecode frame type settings.
NOTE
• If the page item is set to but a REC MODE REC Mode Mirror
condition disables mirror recording, take and current projects
names on the non-current CF card will not be changed. (See
"Conditions that disable mirror recording" under "Mirror recording
function added" in "New functions in rmware V1.10".)
• When mirror recording, the sampling frequency and timecode
frame type settings must be the same for projects with the same
name on both CF cards. The pop-up message below will appear if
one of the following conditions occurs and a project exists on the
other, non-current CF card that has the same name as the current
project but dierent sampling frequency or timecode frame type
settings.
• The setting is changed to REC Mode Mirror
• The unit is turned on when is set to REC Mode Mirror
• A project is loaded when is set to REC Mode Mirror
• 2 CF cards are loaded when is set to REC Mode Mirror
In this case, touch the button to open the CREATE CREATE
PROJECT screen and create a new project.
Mirror recording will not be possible if you touch the CANCEL
button and do not create a new project.
Mirror DELETE MODE setting added
If the page item is set to and mirror REC MODE REC Mode Mirror
recording is enabled, when a take is deleted, or can RENAME DELETE
be selected as the operation used for the take with the same name
on the other, non-current CF card.
This setting can be changed using the item Mirror DELETE MODE
that has been added to the page of the screen.REC MODE REC SETUP
REC SETUP REC MODE screen page
Options
RENAME* (default):
The name of the corresponding take on the non-current CF
card will be changed according to the RENAME format below.
Choose this setting to use the non-current CF card as backup
media, for example.
DELETE:
The corresponding take on the non-current CF card will be
deleted. Choose this setting to keep the content of both CF
cards the same.
* RENAME format
"~" + "original take name" + "_time of deletion (hour, minute,
second)"
Example:
Name of deleted take :Scene001-T001
Name of take after deletion :~Scene001-T001_163504
NOTE
When MONO le mode takes are deleted, the deletion time noted
in the lename might be dier for each channel.
CAUTION
Even when mirror recording with two CF cards that have the
same capacity, the non-current CF card might run out of space
sooner when takes are deleted using the setting. Be aware RENAME
that even if one CF card runs out of open space, recording to the
other CF card will continue, but mirror recording will become
impossible.
TASCAM HS-P82 3
HS-P82
Changing the names of a take recorded at the
same time as a stereo mix (LR 2mix)
When changing the name of a take recorded at the same time as a
stereo mix (LR 2mix), the name of the stereo mix le (~_ST.wav) will
also be changed now.
Example:
• Take list before take name changed
• Changing the name of the selected take
• Take list after take name changed
NOTE
• If you change the name of a stereo mix take le, the name of the
corresponding les for the individual channel les will not be
changed.
• If an “@” (circle take) has been added to a stereo mix take le, it
will be retained even if the take name is changed. In other words,
if “@” was added to the name before it was changed, “@” will still
be added to the stereo mix take le name.
Example 1 Name before
change
Name after
change
Take name
Scene02-T001 2016-10-01
Stereo mix take
name
@Scene02-T001_ST @2016-10-01_ST
However, if “@” was not added to the name before it was changed,
“@” will not be added to the stereo mix take le name even if it is
added to the changed take name.
Example 2 Name before
change
Name after
change
Take name
Scene02-T001 @2016-10-01
Stereo mix take
name
Scene02-T001_ST 2016-10-01_ST
Function added requiring buttons to be pressed
and held to stop recording
In order to prevent recording from accidentally been stopped, a
function has been added that requires buttons to be pressed and
held to stop recording. This setting requiring buttons to be pressed
and held to stop recording can be changed using the REC STOP/
PAUSE MODE REC MODE REC SETUP item added to the page of the
screen.
REC SETUP REC MODE screen page
Options
NORMAL (default):
Pressing the key during recording will STOP/PAUSE
immediately stop/pause recording.
HOLD:
Pressing and holding the key during recording STOP/PAUSE
for three seconds will stop/pause recording. Pressing the
STOP/PAUSE key during recording for less than three seconds
will cause the following message to appear.
NOTE
This function aects STOP/PAUSE operations using the following
controls.
• Front panel
• PS/2 keyboard
• RC-F82

Product specificaties

Merk: Tascam
Categorie: Hifi systeem
Model: HS-P82

Heb je hulp nodig?

Als je hulp nodig hebt met Tascam HS-P82 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Hifi systeem Tascam

Tascam

Tascam HS-2000 Handleiding

21 Juni 2023
Tascam

Tascam CG-2000 Handleiding

13 Mei 2023
Tascam

Tascam US-16x08 Handleiding

2 Mei 2023
Tascam

Tascam MiNiSTUDIO Personal US-32 Handleiding

1 Mei 2023
Tascam

Tascam ML-4D/OUT-X Handleiding

16 April 2023
Tascam

Tascam US-4X4HR Handleiding

9 April 2023
Tascam

Tascam US-122 Handleiding

9 April 2023
Tascam

Tascam US-1X2HR Handleiding

6 April 2023
Tascam

Tascam HS-20 Handleiding

3 April 2023
Tascam

Tascam Mixcast 4 Handleiding

29 Maart 2023

Handleiding Hifi systeem

Nieuwste handleidingen voor Hifi systeem

Philips

Philips MC-120 Handleiding

26 April 2024
Panasonic

Panasonic SC-AK630 Handleiding

22 April 2024
Philips

Philips FW-C355 Handleiding

15 April 2024
Sony

Sony DHC-MD373 Handleiding

15 April 2024
Philips

Philips BTB2570 Handleiding

15 April 2024
Thomson

Thomson DS121CD Handleiding

13 April 2024
Thomson

Thomson DS122CD Handleiding

13 April 2024
Panasonic

Panasonic RX-D15 Handleiding

11 April 2024
RCF

RCF NDX595 Handleiding

10 April 2024
The Box

The Box MBA120W MKII HTHT Handleiding

9 April 2024