Tascam CD-160 Handleiding

Tascam CD-spelers/recorder CD-160

Lees hieronder de 📖 handleiding in het Nederlandse voor Tascam CD-160 (52 pagina's) in de categorie CD-spelers/recorder. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/52

9A08842700

NEDERLANDS ESPAÑOL ITALIANO DEUTSCH FRANÇAIS ENGLISH

This appliance has a serial number located

on the rear panel. Please record the model

number and serial number and retain them

for your records.

Model number

Serial number

WARNING: TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the literature

accompanying the appliance.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert

the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure

that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CD-160

Compact Disc Player

OWNER'S MANUAL / MANUEL DU PROPRIETAIRE

BEDIENUNGSANLEITUNG / MANUALE DI ISTRUZIONI

MANUAL DEL USUARIO / GEBRUIKSAANWIJZING

– 2 –

IMPORTANT SAFETY INSTRUCTIONS

CAUTION:

•Read all of these Instructions.

•Save these Instructions for later use.

•Follow all Warnings and Instructions marked on the audio

equipment.

1) Read Instructions — All the safety and operating instructions

should be read before the product is operated.

2) Retain Instructions — The safety and operating instructions

should be retained for future reference.

3) Heed Warnings — All warnings on the product and in the

operating instructions should be adhered to.

4) Follow Instructions — All operating and use instructions should

be followed.

5) Cleaning — Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp

cloth for cleaning.

6) Attachments — Do not use attachments not recommended by

the product manufacturer as they may cause hazards.

7) Water and Moisture — Do not use this product near water

_for

example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in

a wet basement; or near a swimming pool; and the like.

8) Accessories — Do not place this product on an unstable cart,

stand, tripod, bracket, or table. The product may fall, causing serious

injury to a child or adult, and serious damage to the product. Use

only with a cart, stand, tripod, bracket, or table recommended by the

manufacturer, or sold with the product. Any mounting of the product

should follow the manufacturer’s instructions, and should use a

mounting accessory recommended by the manufacturer.

9) A product and cart combination should be moved with care. Quick

stops, excessive force, and uneven surfaces may cause the product

and cart combination to overturn.

"Note to CATV system installer:

This reminder is provided to call the CATV system installer’s

attention to Section 820-40 of the NEC which provides guidelines for

proper grounding and, in particular, specifies that the cable ground

shall be connected to the grounding system of the building, as close

to the point of cable entry as practical."

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250. PART H)

NEC - NATIONAL ELECTRICAL CODE

ELECTRIC

SERVICE

EQUIPMENT

Example of Antenna Grounding as per

National Electrical Code, ANSI/NFPA 70

GROUND

CLAMP

15) Lightning — For added protection for this product during a

lightning storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet and disconnect the

antenna or cable system. This will prevent damage to the product

due to lightning and power-line surges.

16) Power Lines — An outside antenna system should not be

located in the vicinity of overhead power lines or other electric light

or power circuits, or where it can fall into such power lines or circuits.

When installing an outside antenna system, extreme care should be

taken to keep from touching such power lines or circuits as contact

with them might be fatal.

17) Overloading — Do not overload wall outlets, extension cords, or

integral convenience receptacles as this can result in risk of fire or

electric shock.

18) Object and Liquid Entry — Never push objects of any kind into

this product through openings as they may touch dangerous voltage

points or short-out parts that could result in a fire or electric shock.

Never spill liquid of any kind on the product.

19) Servicing — Do not attempt to service this product yourself as

opening or removing covers may expose you to dangerous voltage

or other hazards. Refer all servicing to qualified service personnel.

20) Damage Requiring Service — Unplug this product from the

wall outlet and refer servicing to qualified service personnel under

the following conditions:

a) when the power-supply cord or plug is damaged.

b) if liquid has been spilled, or objects have fallen into the product.

c) if the product has been exposed to rain or water.

d) if the product does not operate normally by following the

operating instructions. Adjust only those controls that are covered by

the operating instructions as an improper adjustment of other

controls may result in damage and will often require extensive work

by a qualified technician to restore the product to its normal

operation.

e) if the product has been dropped or damaged in any way.

f ) when the product exhibits a distinct change in performance

_ this

indicates a need for service.

21) Replacement Parts — When replacement parts are required,

be sure the service technician has used replacement parts specified

by the manufacturer or have the same characteristics as the original

part. Unauthorized substitutions may result in fire, electric shock, or

other hazards.

22) Safety Check — Upon completion of any service or repairs to

this product, ask the service technician to perform safety checks to

determine that the product is in proper operating condition.

23) Wall or Ceiling Mounting — The product should be mounted to

a wall or ceiling only as recommended by the manufacturer.

24) Heat — The product should be situated away from heat sources

such as radiators, heat registers, stoves, or other products (including

amplifiers) that produce heat.

10) Ventilation — Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the product and to

protect it from overheating, and these openings must not be blocked

or covered. The openings should never be blocked by placing the

product on a bed, sofa, rug, or other similar surface. This product

should not be placed in a built-in installation such as a bookcase or

rack unless proper ventilation is provided or the manufacturer’s

instructions have been adhered to.

— This product should be operated only from the type of power

source indicated on the marking label. If you are not sure of the type

of power supply to your home, consult your product dealer or local

power company. For products intended to operate from battery

power, or other sources, refer to the operating instructions.

12) Grounding or Polarization — This product may be equipped

with a polarized alternating-current line plug (a plug having one

blade wider than the other). This plug will fit into the power outlet only

one way. This is a safety feature. If you are unable to insert the plug

fully into the outlet, try reversing the plug. If the plug should still fail

to fit, contact your electrician to replace your obsolete outlet. Do not

defeat the safety purpose of the polarized plug.

13) Power-Cord Protection — Power-supply cords should be

routed so that they are not likely to be walked on or pinched by items

placed upon or against them, paying particular attention to cords at

plugs, convenience receptacles, and the point where they exit from

the product.

14) Outdoor Antenna Grounding — If an outside antenna or

cable system is connected to the product, be sure the antenna or

cable system is grounded so as to provide some protection against

voltage surges and built-up static charges. Article 810 of the

National Electrical Code, ANSI/NFPA 70, provides information with

regard to proper grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna discharge unit, size of

grounding conductors, location of antenna-discharge unit,

connection to grounding electrodes, and requirements for the

grounding electrode.

– – 3

SAFETY INFORMATION

This product has been designed and manufactured according to FDA regulations "title 21, CFR, chapter 1, subchapter J, based on the Radiation

Control for Health and Safety Act of 1968", and is classified as a class 1 laser product. There is no hazardous invisible laser radiation during operation

because invisible laser radiation emitted inside of this product is completely confined in the protective housings.

The label required in this regulation is shown 1.

OCAUTION

- DO NOT REMOVE THE PROTECTIVE HOUSING USING A SCREWDRIVER.