Tamron A058 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Tamron A058 (3 pagina's) in de categorie Lens. Deze handleiding was nuttig voor 60 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/3
TLM-A058-T/T-2109-01
Model:
A058
Owner’s manual
35-150mm F/2-2.8 Di
III
VXD
For Sony E
1716
1112
15
16
3
4
6
7
15
11
10
13
9
8
1
5
12
14
2
Focusing
Zooming
Sony
* The Marking is a directive conformity mark of the European Community (EC).
* Das -Zeichen entspricht der EC Norm.
* La marquage est un marquage de conformité .à la direcive CEE (CE)
* La marca es marca de conformidad segun directiva de la Comunidad Europea (CE).
* Il marchio attesta la conformita alla directtiva della Comunit .à Europea (CEE)
* 标志表示符合欧州共同体(EC)指标
The EEC Conformity Report applies to the Council
Directive 2014/30/EU, 2011/65/EU and is used by
Tamron Co., Ltd., manufacturer of this product.
3
6
4
6
ENGLISH
Disposal of Electrical and Electronic Equipment in Private Households.
Disposal of used Electrical & Electronic Equipment (Applicable in the
European Union and other European countries with separate collection
systems)
This symbol indicates that this product shall not be treated as household waste.
Instead it shall be collected separately for the recycling of electrical and
electronic equipment.
If the new products are purchased, this product might be handed over to the distributor or
the collection system of waste electrical and electronic equipment eventually.
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product or components of this product.
If this product is disposed illegally, it might cause a possibility of penalties. For more detailed
information about recycling of this product, please contact your local Civic Ofce, your
household waste disposal service or the shop where you purchased the product.
Thank you for purchasing this Tamron lens. Before using your new lens, please read the contents
of this Owner’s manual to properly use the lens. Also, it will be important to read the manual of the
camera to which you will attach the lens.
After reading, store this Owner’s manual in a safe place.
Please read also the document “Precautions for Safe Use of Tamron Lenses” supplied with the
lens for the detailed safety precautions to observe when using Tamron lenses.
•
Explains precautions that help to prevent problems.
•
Explains things you should know in addition to basic operations.
PART NAMES (Refer to Fig. )
①
Lens hood
②
Lens hood release button
③
Hood attaching alignment mark
④
Hood locking mark
⑤
Filter ring
⑥
Hood release mark
⑦
Focus ring
⑧
Focal length scale
⑨
Focal length mark
⑩
Focus set button
⑪
AF/MF switch
⑫
Custom switch
⑬
Zooming ring
⑭
Zoom lock switch
⑮
Connector port
⑯
Lens attachment mark
⑰
Lens-camera interface contacts
MAIN SPECIFICATIONS
Model A058
Focal Length 35 - 150 mm
Maximum Aperture F/2 - 2.8
Angle of View (diagonal) 63
˚
26
'
- 16
˚
25
'
Optical Construction 15/21
Minimum Object Distance (MOD) 0.33 m (13
"
) (Wide) / 0.85 m (33.5
"
) (Tele)
Maximum Magnication Ratio 1:5.7 (Wide MOD) / 1:5.9 (Tele MOD)
Filter Size
ø
82 mm
Length 158 mm (6.2
"
)
Maximum Diameter
ø
89.2 mm
Weight 1,165 g (41.1 oz)
Lens Hood HA058
Connector Type USB Type-C
•
Length : From tip of front element to mount surface.
•
Specications, appearance, functionality, etc. are subject to change without prior notice.
ATTACHING AND REMOVING THE LENS
Remove the rear cap of the lens. Align the lens attachment mark
⑯
and mounting mark on the
camera, and then insert the lens.
Turn the lens clockwise until it locks.
To remove the lens, turn the lens in the opposite direction while pressing the lens release button
on the camera.
•
Turn off the power of the camera before attaching or removing the lens.
•
For details, please read the instruction manual of your camera.
SWITCHING FOCUS MODE (Ref. Figs. ),
Selection of focus mode is done using the camera and the AF/MF switch
⑪
on the lens.
■
AF/MF Switching (Ref. Figs.
,
)
To shoot using autofocus (AF), set both the camera and the AF/MF switch
⑪
on the lens to
“AF”. (Ref. Fig.
) (If the lens is set at “MF”, it will not autofocus.)
To shoot using manual focus (MF), set the camera and/or the lens AF/MF switch
⑪
to “MF”.
For manual focus, turn the focus ring
⑦
to acquire the focus. (Ref. Figs.
,
)
•
Under AF mode, there may be difculty for autofocus to work depending on the subject.
•
If your camera features an AF/MF control button, it is possible to temporarily switch to MF from
AF, by pressing the AF/MF control button. When the lens set to “AF” and the camera set to “MF”,
by pressing the AF/MF control button you may temporarily switch the focus to AF.
•
For details, please read the instruction manual of your camera.
FOCUS SET BUTTON (Ref. Fig. )
Press the focus set button
⑩
to use the function that has been assigned from the camera.
See the manual of the camera for more details.
CONNECTOR PORT (Ref. Fig. )
Lenses with the connector port
⑮
can be connected to a computer using the TAMRON connection
cable (sold separately). Then, using the dedicated “TAMRON Lens Utility
TM
” application, you will
be able to update the rmware and register functions to the custom switch
⑫
.
See the online help of “TAMRON Lens Utility
TM
” using the link below for more details.
https://www.tamron.jp/en/support/lensutility/help/
•
Do not use the TAMRON connection cable (sold separately) for any purpose other than connecting
the TAMRON lens equipped with a connector port to a computer.
•
Our company will not bear any responsibility for any loss or damage of data in use of the TAMRON
connection cable (sold separately).
CUSTOM SWITCH (Ref. Fig. )
Using the custom switch
⑫
, you can switch the functions registered to the lens with the
dedicated “TAMRON Lens Utility
TM
” application.
ZOOMING (Ref. Fig. )
Turn the zooming ring
⑬
to adjust the focal length (Zoom position) to a desired position.
ZOOM LOCK MECHANISM (Ref. Figs. ), ,
You can lock the zooming ring
⑬
at a focal length of 35mm to keep it from rotating.
■
Setting the zoom lock (Ref. Fig.
)
Align 35mm on the focal length scale
⑧
with the focal length mark
⑨
.
Set the zoom lock switch
⑭
toward the camera.
■
Releasing the zoom lock (Ref. Fig.
)
Set the zoom lock switch
⑭
toward the subject.
•
To zoom, release the lock, and then rotate the zooming ring
⑬
.
LENS HOOD (Ref. Figs. ), ,
The hood
①
can eliminate stray light that may affect the picture.
■
Using the lens hood (Ref. Fig.
)
Align the hood attaching alignment mark
③
of the hood with the hood release mark
⑥
of the
lens.
Rotate the hood
①
in the direction of the arrow until the hood locking mark
④
meets the hood
release mark
⑥
.
■
Stowing the lens hood (Ref. Fig.
)
Attach the hood
①
in reverse and rotate it until it locks.
■
Removing the hood
When removing the hood
①
from both the use and stowed positions, rotate it in the opposite
direction to that in the installation while pressing the lens hood release button
②
.
•
Be aware that the periphery of the photographed image may be darkened if the hood
①
is not
attached properly.
USAGE PRECAUTIONS
•
An internal focusing (IF) system is employed to reduce the minimum focus distance. The angle of
view may be wider than that of lenses with other focusing systems when shooting at a distance
less than innity.
•
The lens hood or the lens barrel may block the light from the ash. It is recommended to
perform trial shooting in advance.
•
Differences in the display systems of cameras may cause to show values different from the
maximum and minimum aperture values from the specications. This is not an indication of an
error.
•
Do not touch the lens-camera interface contacts
⑰
with your ngers. Otherwise, it may cause a
malfunction.
•
If the temperature changes suddenly, condensation may form and cause malfunctions.
•
The front element is covered with stain-proof coating. After removing the dust on the lens
surface with a blower or another means, wipe it with a dry cloth.
•
Never use benzene, thinner, or other organic solvents to clean the lens.
•
Store the lens in a clean and well-ventilated place.
•
For more details on the lens cleaning and storage, the compatibility with cameras, and other
support information see our website. https://www.tamron.jp/en/support/
For safe operation be sure to carefully read the "Precautions for Safe Use of Tamron Lenses" and the
manual before using the product.
After reading them, store them in a place where they can easily be reviewed whenever needed.
Caution instructions are divided into the following two categories according to the degree of danger
involved.
• Do not view the sun or other strong light source directly through the lens or through a camera
while using this lens.
Doing so could cause loss of vision, damage to the lens and/or the camera, and possibly cause
the lens and/or camera to ignite.
• Do not dissemble, repair, or modify the lens.
This could damage the lens or camera.
• Keep the lens out of the reach of small children.
There is a risk of injury if the lens is dropped or falls down.
TPL-EN-Lens-T-2109
This indicates instructions which if not followed or if performed
incorrectly could lead to death or serious injury.
Precautions for Safe Use of Tamron Lenses
ENGLISH
WARNING
• Do not place lens in direct sunlight or leave it in an extremely hot place such as inside a car. Doing
such could damage the internal parts of the lens or cause a fire.
• Always attach the lens cap whenever the lens is not in use.
• When attaching the lens to the camera, ensure that the lens has been properly attached to the
camera and firmly locked.
If the lens is not attached properly, it could be difficult to remove or it could fall off causing damage
or injury.
• Do not use this lens for any application other than photography.
• Do not carry around the lens while it is still attached to a tripod.
• Regarding the lens equipped with a connector port
1) Place the lens in a stable location when customizing the lens using the dedicated application
(TAMRON Lens Utility
TM). Make sure not to let it fall or impact the lens.
2) When connecting the lens to a computer, use a Tamron connection cable (sold separately).
3) Do not touch the connector port with your fingers or a metal object. Also, prevent dust or water
from adhering to the connector port. If the connector port is dirty, it may cause connection
problems.
• Tamron will not be responsible for damages caused by a failure, a fire, or other accidents that may
occur when using an accessory other than Tamron accessories. Note that in case of such damage,
repair of the Tamron lens will be charged since it is not covered by the warranty.
This indicates instructions which if not heeded or if performed
incorrectly could lead to bodily injury or physical damage
CAUTION
Product specificaties
| Merk: | Tamron |
| Categorie: | Lens |
| Model: | A058 |
Heb je hulp nodig?
Als je hulp nodig hebt met Tamron A058 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Lens Tamron
13 Maart 2024
13 Maart 2024
13 Maart 2024
13 Maart 2024
13 Maart 2024
13 Maart 2024
16 November 2023
15 November 2023
15 November 2023
3 Juli 2023
Handleiding Lens
- Lens Sony
- Lens Samsung
- Lens Panasonic
- Lens Nikon
- Lens Canon
- Lens Olympus
- Lens Axis
- Lens Bresser
- Lens Brinno
- Lens Flir
- Lens Fujifilm
- Lens Gaggenau
- Lens Godox
- Lens Kodak
- Lens Leica
- Lens Marshall
- Lens MSI
- Lens Pentax
- Lens Sigma
- Lens Vivitar
- Lens Optoma
- Lens Vello
- Lens Zeiss
- Lens Lensbaby
- Lens Tokina
- Lens Celly
- Lens Carl Zeiss
- Lens Computar
- Lens InLine
- Lens Hanwha
- Lens Pelco
- Lens Laowa
- Lens Cambo
- Lens Irix
- Lens Accsoon
- Lens NiSi
- Lens DZOFilm
Nieuwste handleidingen voor Lens
26 April 2024
26 April 2024
26 April 2024
26 April 2024
26 April 2024
26 April 2024
26 April 2024
25 April 2024
3 April 2024
3 April 2024