Tamron 70-180mm F/2.8 Di III VXD Handleiding

Tamron Lens 70-180mm F/2.8 Di III VXD

Lees hieronder de 📖 handleiding in het Nederlandse voor Tamron 70-180mm F/2.8 Di III VXD (3 pagina's) in de categorie Lens. Deze handleiding was nuttig voor 49 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3

TLM-A056-S-T/T-2003-01

Model:

A 056

Owner’s manual

* The Marking is a directive conformity mark of the European Community (EC).

* Das -Zeichen entspricht der EC Norm.

* La marquage est un marquage de conformité .à la direcive CEE (CE)

* La marca es marca de conformidad segun directiva de la Comunidad Europea (CE).

* Il marchio attesta la conformita alla directtiva della Comunit .à Europea (CEE)

* 标志表示符合欧州共同体(EC)指标

The EEC Conformity Report applies to the Council

Directive 2014/30/EU, 2011/65/EU and is used by

Tamron Co., Ltd., manufacturer of this product.

70-180mm F/2.8 Di

III

VXD

For Sony E

Sony

1211

󱄑Focusing

Zooming

󱄏

󱄙󱄗

󱄛

󱄓 󱄕

ENGLISH

Disposal of Electrical and Electronic Equipment in Private Households.

Disposal of used Electrical & Electronic Equipment (Applicable in the

European Union and other European countries with separate collection

systems)

This symbol indicates that this product shall not be treated as household waste.

Instead it shall be collected separately for the recycling of electrical and

electronic equipment.

If the new products are purchased, this product might be handed over to the distributor or

the collection system of waste electrical and electronic equipment eventually.

By ensuring this product is disposed of correctly, you will help prevent potential negative

consequences for the environment and human health, which could otherwise be caused by

inappropriate waste handling of this product or components of this product.

If this product is disposed illegally, it might cause a possibility of penalties. For more detailed

information about recycling of this product, please contact your local Civic Ofce, your

household waste disposal service or the shop where you purchased the product.

Thank you for purchasing this Tamron lens. Before using your new lens, please read the contents

of this Owner’s manual to properly use the lens. Also, it will be important to read the manual of the

camera to which you will attach the lens.

After reading, store this Owner’s manual in a safe place.

Please read also the document “Precautions for Safe Use of Tamron Lenses” supplied with the

lens for the detailed safety precautions to observe when using Tamron lenses.

•

Explains precautions that help to prevent problems.

•

Explains things you should know in addition to basic operations.

PART NAMES (Refer to Fig. )󱄏

①

Lens hood

②

Hood attaching alignment mark

③

Hood locking mark

④

Filter ring

⑤

Hood release mark

⑥

Zooming ring

⑦

Focal length scale

⑧

Focal length mark

⑨

Focus ring

⑩

Zoom lock switch

⑪

Lens attachment mark

⑫

Lens-camera interface contacts

MAIN SPECIFICATIONS

Model A056

Focal Length 70-180 mm

Maximum Aperture F/2.8

Angle of View (diagonal) 34

- 13

Optical Construction 14/19

Minimum Object Distance（）MOD

AF: 0.85 m (33.5") (entire zoom range) (*

1 MF: 0.27 m (10.6") (Wide) / 0.85 m (33.5") (Tele))

Maximum Magnication Ratio AF: 1:4.6 (

1 MF: 1:2 (Wide) / 1:4.6 (Tele))

Filter Size

67 mm

Length

・

Maximum Diameter 149 mm (5.9

)

・

81 mm

Weight 810 g (28.6 oz)

Lens Hood HA056

•

Length : From tip of front element to mount surface.

•

Specications, appearance, functionality, etc. are subject to change without prior notice.

1 Shooting at a close range of 0.27 m, at the 70 mm setting, is possible only when manual focus

(MF) is set on the camera. However, it may be difcult to focus since the image quality

decreases in peripheral areas. For details, please visit this website.

https://www.tamron.jp/en/support/guide/closeup.html

ATTACHING AND REMOVING THE LENS

Remove the rear cap of the lens. Align the lens attachment mark

⑪

and mounting mark on the

camera, and then insert the lens.

Turn the lens clockwise until it locks.

To remove the lens, turn the lens in the opposite direction while pressing the lens release button

on the camera.

•

Turn off the power of the camera before attaching or removing the lens.

•

For details, please read the instruction manual of your camera.

SWITCHING FOCUS MODE (Ref. Figs. )󱄏, 󱄑

Select the desired focus mode on the camera.

For manual focusing, turn the focus ring

⑨

to acquire the desired focus.

For details, please read the instruction manual of your camera.

•

In AF mode, it may be difcult for autofocus to work depending on the subject.

ZOOMING (Ref. Figs. )󱄏, 󱄑

Turn the zooming ring

⑥

to adjust the focal length (Zoom position) to a desired position.

ZOOM LOCK MECHANISM (Ref. Figs. )󱄏, 󱄓, 󱄕

You can lock the zooming ring

⑥

at a focal length of 70 mm to keep it from rotating.

■

Setting the zoom lock (Ref. Fig.

󱄓

)

Align 70 mm on the focal length scale

⑦

with the focal length mark

⑧

Push the zoom lock switch

⑩

toward the camera.

■

Releasing the zoom lock (Ref. Fig.

󱄕

)

Push the zoom lock switch

⑩

toward the zooming ring.

•

To zoom, release the lock, and then rotate the zooming ring.

LENS HOOD (Ref. Figs. - )󱄏, 󱄗 󱄛

A bayonet-type lens hood

①

is provided as standard equipment.

We recommend shooting with the hood properly attached because the lens hood eliminates stray

light that may affect the picture.

■

Using the lens hood (Ref. Figs.

󱄗

󱄙

)

Align the hood attaching alignment mark

②

of the hood with the hood release mark

⑤

of the

lens.

Rotate the hood

①

in the direction of the arrow until the hood locking mark

③

meets the hood

release mark

⑤

■

Stowing the lens hood (Ref. Fig.

󱄛

)

You can stow the lens hood

①

by attaching it in reverse. (Refer to Fig.

󱄛

for the rotation

direction and the marks)

•

Be aware that the perimeter of the photographed image may be darkened if the hood

①

is not

attached properly.

USAGE PRECAUTIONS

•

An internal focusing (IF) system is employed to reduce the minimum focus distance. The angle of

view may be wider than that of lenses with other focusing systems when shooting at a distance

less than innity.

•

The lens hood or the lens barrel may block the light from the ash. It is recommended to

perform trial shooting in advance.

•

Differences in the display systems of cameras may cause to show values different from the

maximum and minimum aperture values from the specications. This is not an indication of an

error.

•

Do not touch the lens-camera interface contacts with your ngers. Otherwise, it may cause a

malfunction.

•

If the temperature changes suddenly, condensation may form and cause malfunctions.

•

The front element is covered with stain-proof coating. After removing the dust on the lens

surface with a blower or another means, wipe it with a dry cloth.

•

Never use benzene, thinner, or other organic solvents to clean the lens.

•

Store the lens in a clean and well-ventilated place.

•

For more details on the lens cleaning and storage, the compatibility with cameras, and other

support information see our website. https://www.tamron.jp/en/support/

For safe operation be sure to carefully read the "Precautions for Safe Use of Tamron Lenses" and the

manual before using the product.

After reading them, store them in a place where they can easily be reviewed whenever needed.

Caution instructions are divided into the following two categories according to the degree of danger

involved.

 Do not view the sun or other strong light source directly through the lens or through a camera

while using this lens.

Doing so could cause loss of vision, damage to the lens and/or the camera, and possibly cause

the lens and/or camera to ignite.

 Do not dissemble, repair, or modify the lens.

This could damage the lens or camera.

 Keep the lens out of the reach of small children.

There is a risk of injury if the lens is dropped or falls down.

TPL-EN-Lens-T-1701

This indicates instructions which if not followed or if performed

incorrectly could lead to death or serious injury.

Precautions for Safe Use of Tamron Lenses

ENGLISH

WARNING

 Do not place lens in direct sunlight or leave it in an extremely hot place such inside a car. Doing such

could damage the internal parts of the lens or cause a fire.

 Always attach the lens cap whenever the lens is not in use.

 When attaching the lens to the camera, ensure that the lens has been properly attached to the

camera and firmly locked.

If the lens is not attached properly, it could be difficult to remove or it could fall off causing damage

or injury.

 Do not use this lens for any application other than photography.

 Do not transport the lens while it is still attached to a tripod.

This indicates instructions which if not heeded or if performed

incorrectly could lead to bodily injury or physical damage

CAUTION

Product specificaties

Merk:	Tamron
Categorie:	Lens
Model:	70-180mm F/2.8 Di III VXD
Kleur van het product:	Zwart
Gewicht:	810 g
Automatisch scherpstellen:	Ja
Diameter:	81 mm
Brandpuntbereik:	70 - 180 mm
Lensstructuur (elementen/groepen):	19/14
Lengte:	149 mm
Scherpstellen:	Automatisch/handmatig
Dichtstbijzijnde focus afstand:	0.27 m
Maximum aperture number:	2.8
Minimum aperture number:	22
Maat filter:	67 mm
Lens type:	Telezoomlens
Lens kapje:	Ja
Lensdop inbegrepen:	Ja
Component voor:	MILC
Manuele focus:	Ja
Kijkhoek lens, diagonaal:	42 - 34 °
Lens mount interface:	Sony E
Aantal diafragma bladen:	9
Afbeeldingsensor format:	Full frame
Compatibele camera merken:	Sony
Lenskapvorm:	Kroonvormige lenskap
Type lenskap:	Verwijderbare lenskap
Kenmerken lenscoating:	Fluor-coating