Synco WAir-G1T Handleiding

Synco Niet gecategoriseerd WAir-G1T

Lees hieronder de 📖 handleiding in het Nederlandse voor Synco WAir-G1T (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions
mentioned herein.
Microphone G1T/ G1L User Manual
Caring For Your SYNCO Product
Package List
Product Instruction
Operations
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the
product to prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized
technicians if any malfunctions happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
TX Transmitter x1 RX Receiver (Type-C or
Lightning Connector) x1
Carrying Bag x1
Mic Windshield x1 Charging Cable x1
TX Transmitter
RX Receiver
Indicator — TX Transmitter
Indicator — RX Receiver
â‘  External Mic Input
â‘¡ USB-C Port
â‘¢ Power/ Mute
â‘£ Reset(Help with Eject Pin)
⑤ Low Cut
â‘  Vocal Eó½—ˆects
â‘¡ Pairing/ Gain Control
â‘¢ USB-C Port
â‘¥ Pairing
⑦ Built-in Mic
⑧ Pocket Clip
⑨ Pairing/ Muting Indicator
â‘© Power Indicator
â‘£ Detachable Connector
⑤ 3.5mm In-Ear Monitoring Jack
â‘¥ Pairing Indicator
TX
1.Power/ Mute
2.Charging
3.External Mic Input
4.Mic Windshield & Device Installation
5.Reset
6.Low Cut
7.Pairing
Long Press 3s: turn on/oó½—ˆ the system
Short Press: mute/unmute the
microphone
5V/2A;
Please fully charge the product
before use with USB-C charging
cable.
Slow ó½—Šashes System unpaired
Slow ó½—Šashes
Keeps on
System unpaired /
System paired Vocal eó½—ˆects on
/
Pairing/ Muting Indicator Power Indicator
Pairing Indicator
Fast ó½—Šashes System pairing
Fast ó½—Šashes System pairing /
/
/
Keeps on System paired
Low cut on
Muting
Fast ó½—Šashes
twice
Short Press: 150Hz Low Cut On
Short Press again: Low Cut Oó½—ˆ
Gently poke the pin into Reset for 3 seconds to
restore factory defaults.
The system will pair automatically after power on.
Manual pairing: long press the pairing button on the RX and TX for 3
seconds at the same time
TRS Mic Only
( When using an external mic, please insert it Note:
into the mic input properly.)
Eject Pin
Long press for 3s
at the same time
TX RX
TX
Low battery
/
/
Stays on when
charging and is oó½—ˆ
after fully charged
RX
1.Vocal Eó½—ˆects
Short press to switch sound eó½—ˆects: Original -
Studio FX - KTV FX - Voice Amplió½—‰cation - EDM
(Electronic Dance Music) - Baby FX - Male to
Female - Female to Male - Monster FX
3.USB-C Port
For charging phone device
The system will pair automatically
after power on.
2.Pairing/ Gain Control
4.Detachable Connector
G1T: Type-C connector
G1L: Lightning connector
Extra Type-C or Lightning connector is available separately to adapt RX
to more phone devices.
Manual pairing: long press the pairing button on the RX
and TX for 3 seconds at the same time
Gain Control: 0-3 Level
Each short press increases gain by one level.
Long press for 3s
at the same time
TX RX
Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou,
China, 510000
support@syncoaudio.com
www.syncoaudio.com
https://www.facebook.com/syncomicrophones
Guangzhou Zhiying Technology Co., Ltd
Type-C connector Lightning connector
Wireless Transmission
RF Frequency Band
Working Distance
Sampling Rate
Bit Depth
SNR
Audio Input
RF Output Power
Power Requirements
Battery Type
Charging Port
Battery Charging Time
Form Factor
Sound Field
Polar Pattern
Frequency Range
Sensitivity
Maximum SPL
Digital 2.4GHz
2400-2483.5MHz
492ft/150m(LOS area);
164ft/50m(NLOS area)
48KHz
16Bit
ï¹¥75dB
1/8" / 3.5mm TRS Mic Input
20dB
3.3V-4.7V
Built-in Lithium Battery, 400mAh
USB-C
1.5H
Built-in Mic
Mono
Omnidirectional
50-20KHz
-42dB (±3dB, re 1V/Pa at 1KHz)
110dB SPL (at 1KHz)
TX Transmitter
Microphone
Warranty Exclusions and Limitations
Faults resulted from inappropriate use of a product without following its
operation speció½—‰cation
Warranty Claim Procedure
If failure or any problem occurs to your product after purchase,
please contact a local agent for assistance, or you can always contact
SYNCO’s customer service through email at support@syncoaudio.
com.
Please retain your sales receipt and warranty certió½—‰cate as proof of
purchase. If any of these documents is missing, only sales return or
chargeable service will be provided.
If the SYNCO product is out of the warranty coverage, the service and
the parts cost will be charged.
Warranty Period
Thank you for purchasing SYNCO products.
1. Customers are entitled to free replacement or repair service in case of
quality defect(s) found in the product under normal use within 30 days
upon receipt of the product.
2. Original SYNCO products are entitled to limited warranty 12-month
service. The warranty period begins on the date of purchase of brand
new, unused products by the ó½—‰rst end-user.
Within the warranty period, if product defect or failure is attributable to
material defection or technological problem, the defective product or
defective part will be repaired or replaced without charge (service and
materials fee).
Wireless Transmission
RF Frequency Band
Working Distance
Sampling Rate
Bit Depth
Antenna
Number of Audio Channels
Monitoring
Audio Output
Gain
Power Requirements
Dimensions
Material
Weight
Digital 2.4GHz
2400-2483.5MHz
492ft/150m(LOS area);
164ft/50m(NLOS area)
48KHz
16Bit
Built-in
2
3.5mm In-Ear Monitoring
Lightning or Type-C Output
0-3 Level
5V 1A
55X31X13mm
ABS
12g
RX Receiver
Speció½—‰cations
Warranty
5.3.5mm In-Ear Monitoring Jack
For real-time monitoring mic recording and device’s backgrounding
with headphones
Artió½—‰cial damage, e.g. crash, squeeze, scratch, or soaking
Modió½—‰cations to a product by its user or a third party without prior
written consent of SYNCO, e.g. replacement of element or circuit,
label alteration
The code on product is inconsistent with that of warranty certió½—‰cate,
or the code on the product or warranty certió½—‰cate is altered or torn oó½—ˆ
All consumable accessory attached to a product, like cable, wind
muó½—ˆ, battery
Faults as a result of force majeure, such as ó½—‰re, ó½—Šood, lightning, etc.
Battery Life
Dimensions
Material
Weight
8H
52×42×16mm
ABS
35g
WARRANTY CERTIFICATE
USER
INFORMATION
SALES
INFORMATION
REPAIR
RECORD
RESULT
Please register your warranty. Meanwhile, you are welcomed to contact
us via Email：support@syncoaudio.com
Customer Name:
Phone Number:
Email:
Address:
Sales Date:
Model:
Product Code:
Dealer:
Service Date:
Technician:
Issue:
Solved Unsolved Returned(Replaced)

Product specificaties

Merk: Synco
Categorie: Niet gecategoriseerd
Model: WAir-G1T

Heb je hulp nodig?

Als je hulp nodig hebt met Synco WAir-G1T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Synco

Synco

Synco CMic-V2 Handleiding

7 Juli 2023
Synco

Synco P2L Handleiding

3 Juli 2023
Synco

Synco P2T Handleiding

1 Juli 2023
Synco

Synco WAir-G1T Handleiding

30 Juni 2023
Synco

Synco P1T Handleiding

29 Juni 2023
Synco

Synco WAir-G1L Handleiding

27 Juni 2023
Synco

Synco WMic-T3 Handleiding

25 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024