Synco CMic-V2 Handleiding

Synco Niet gecategoriseerd CMic-V2

Lees hieronder de 📖 handleiding in het Nederlandse voor Synco CMic-V2 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 82 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Thank you for choosing SYNCO product.

Please read this manual carefully before use and follow all instructions mentioned

herein.

Microphone CMic-V2 User Manual

Caring For Your SYNCO Product

Please keep the product in a dry, clean, dust-free environment.

Keep corrosive chemicals, liquids and heat source away from the product to

prevent mechanics damage.

Use only a soft and dry cloth for cleaning the product.

Malfunction may be caused by dropping, impact of external force.

Do not attempt to disassemble the product. Doing so voids warranty.

Please have the product checked or repaired by authorized technicians if any

malfunctions happened.

Failure to follow all the instructions may result in mechanics damage.

Warranty does not apply to human errors.

1. The Use of Pop Filter

3. The Use of Microphone

Product Introduction

Operations

Please install the pop 󽗉lter to the microphone for

blocking air blasts.

1) Use with computer

Connect the mic with the computer

via the USB-A to USB-A cable.

2) Use with smart phone/ tablet

Connect the mic with the device via

the USB-A to Type-C cable.

2. The Use of Desktop Mic Holder

Speci󽗉cations

1. Polar Pattern: Cardioid

① Condenser Capsule

② Working Indicator

Green:Working Red:Muting

③ Mic Volume

④ Monitor Volume

⑤ Mute Mode

First press to initiate mute mode, second

press to turn off mute mode.

⑥ 3.5mm Monitoring Jack

Used for plug-in earphones to monitor

the recording in real time. Please mind the

loudness.

⑦ USB Output

Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000

support@syncoaudio.com

www.syncoaudio.com

https://www.facebook.com/syncomicrophones

Guangzhou Zhiying Technology Co., Ltd

WARRANTY CERTIFICATE

USER

INFORMATION

SALES

INFORMATION

REPAIR

RECORD

RESULT

Please register your warranty. Meanwhile, you are welcomed to contact us

via Email：support@syncoaudio.com

Customer Name:

Phone Number:

Email:

Address:

Sales Date:

Model:

Product Code:

Dealer:

Service Date:

Technician:

Issue:

Solved Unsolved Returned(Replaced)

Warranty Exclusions and Limitations

Faults resulted from inappropriate use of a product without following its

operation speci󽗉cation

Arti󽗉cial damage, e.g. crash, squeeze, scratch, or soaking

Modi󽗉cations to a product by its user or a third party without prior written

Warranty Claim Procedure

If failure or any problem occurs to your product after purchase, please contact

a local agent for assistance, or you can always contact SYNCO’s customer

service through email at

support@syncoaudio.com.

Please retain your sales receipt and warranty certi󽗉cate as proof of purchase.

If any of these documents is missing, only sales return or chargeable service

will be provided.

If the SYNCO product is out of the warranty coverage, the service and the parts

cost will be charged.

Transducer

Frequency Response

Sample/Bit Rate

Signal/Noise

Sensitivity

THD

Impedance

Output Connector

Power Requirement

Dimensions

Cable Length

Weight

Electret Condenser

20Hz-20KHz

192KHz/24-bit

>90dB (1KHz, RL = in󽗉nity)

-36dB (1V/Pa at 1KHz)

<0.05% (1KHz/0dBFS)

≤2.2KΩ

USB

5V 125mA

47×47×156mm

1.8m

490g

2. Performance Parameter

Warranty Period

Thank you for purchasing SYNCO products.

1. Customers are entitled to free replacement or repair service in case of quality

defect(s) found in the product under normal use within 30 days upon receipt of

the product.

2. Original SYNCO products are entitled to limited warranty service. 12-month

The warranty period begins on the date of purchase of brand new, unused

products by the 󽗉rst end-user.

Within the warranty period, if product defect or failure is attributable to material

defection or technological problem, the defective product or defective part will

be repaired or replaced without charge (service and materials fee).

Warranty

consent of SYNCO, e.g. replacement of element or circuit, label alteration

The code on product is inconsistent with that of warranty certi󽗉cate, or the

code on the product or warranty certi󽗉cate is altered or torn o󽗈

All consumable accessory attached to a product, like cable, wind mu󽗈, battery

Faults as a result of force majeure, such as 󽗉re, 󽗊ood, lightning, etc.

Product specificaties

Merk:	Synco
Categorie:	Niet gecategoriseerd
Model:	CMic-V2

Heb je hulp nodig?

Als je hulp nodig hebt met Synco CMic-V2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Synco

Synco CMic-V2 Handleiding

7 Juli 2023

Synco P2L Handleiding

3 Juli 2023

Synco P2T Handleiding

1 Juli 2023

Synco WAir-G1T Handleiding

30 Juni 2023

Synco P1T Handleiding

29 Juni 2023

Synco WAir-G1L Handleiding

27 Juni 2023

Synco WMic-T3 Handleiding

25 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024