Synco Vlogger Kit 2 Handleiding

Bekijk gratis de handleiding van Synco Vlogger Kit 2 (2 pagina’s), behorend tot de categorie Microfoon. Deze gids werd als nuttig beoordeeld door 23 mensen en kreeg gemiddeld 4.8 sterren uit 5 reviews. Heb je een vraag over Synco Vlogger Kit 2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Thank you for choosing SYNCO product.

Please read this manual carefully before use and follow all instructions mentioned

herein.

Caring For Your SYNCO Product

Please keep the product in a dry, clean, dust-free environment.

Keep corrosive chemicals, liquids and heat source away from the product to

prevent mechanics damage.

Use only a soft and dry cloth for cleaning the product.

Malfunction may be caused by dropping, impact of external force.

Do not attempt to disassemble the product. Doing so voids warranty.

Please have the product checked or repaired by authorized technicians if any

malfunctions happened.

Failure to follow all the instructions may result in mechanics damage.

Warranty does not apply to human errors.

Insert the microphone body into the

shock mount. Make sure it is secure and

well-balanced.

① Power & Adjustment Dial

Turn the dial to the right to turn the light on

and left to turn the light out.

When the light is on, rotate the dial to adjust

light e󽗈ect.

② Battery Cover

Please place two AA batteries inside the light

before use, and remove the batteries for

storage.

③ Cold Shoe Mount

④ 1/4” Screw Hole

⑤ Cold Shoe

Microphone Usage

Video Light Instructions

The phone holder provides one cold shoe mount and two 1/4” threads for

attaching microphone or video light, and tripod.

1. Attach the phone holder to the tripod via the 1/4” threads.

2. Unscrew the knob beside the tripod to adjust the 󽗉lming angle.

3. Fasten the knob to 󽗉x the phone holder.

4. Place the smartphone into the clamp and adjust it.

5. Install the video light on the phone holder via the cold shoe mount.

6. Fix the microphone to the cold shoe mount on the video light.

7. Connect the microphone with your phone via the 3.5mm TRRS phone cable.

Kit Installation

1/4” threads

cold shoe mount

Product specificaties