Synco Cmic-V10 Handleiding

Bekijk gratis de handleiding van Synco Cmic-V10 (2 pagina’s), behorend tot de categorie Microfoon. Deze gids werd als nuttig beoordeeld door 19 mensen en kreeg gemiddeld 4.7 sterren uit 6 reviews. Heb je een vraag over Synco Cmic-V10 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Thank you for choosing SYNCO product.

Please read this manual carefully before use and follow all instructions mentioned

herein.

Microphone CMic-V10

User Manual

Caring For Your SYNCO Product

Please keep the product in a dry, clean, dust-free environment.

Keep corrosive chemicals, liquids and heat source away from the product to

prevent mechanics damage.

Use only a soft and dry cloth for cleaning the product.

Malfunction may be caused by dropping, impact of external force.

Do not attempt to disassemble the product. Doing so voids warranty.

Please have the product checked or repaired by authorized technicians if any

malfunctions happened.

Failure to follow all the instructions may result in mechanics damage.

Warranty does not apply to human errors.

1. The Use of Wind Mu󽗈

Product Introduction

Operations

It is highly recommended that you set the recording level on your camera

quite low, 1/2 or 1/3 of it at 󽗉rst, and tailor your levels to just about

environment and recording device.

① High Frequency Boost

② High-pass Filter

③ Front Attenuator

Speci󽗉cations

1. Polar Pattern: Hyper-cardioid

2. The Use of Mic Clip

The 5/8” screw and 3/8” screw accessible mic clip is for attaching accessories

like boompole, mic stand.

3. The Use of Microphone

Connect the mic with the device via the XLR cable.

5/8” screw 3/8” screw

Product specificaties