Synco G2 Handleiding
Bekijk gratis de handleiding van Synco G2 (5 pagina’s), behorend tot de categorie Microfoon. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.9 sterren uit 2.5 reviews. Heb je een vraag over Synco G2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/5
1
SYNCO G2 Wireless Lavalier Microphone FAQ
Q1: What should I do if I lost the accessories of my product? How
can I get after-sales support?
If you have lost any accessories or need after-sales assistance, please
contact Synco Audio’s official customer support via email
at . They will provide further guidance and supportsupport@syncoaudio.com
to resolve your issue.
For faster service, include your product details and a description of the
problem in your email.
Q2: The receiver stops working/signal drops . What should I do?
1. Check Battery Level
The receiver (RX) may have low battery, causing unexpected shutdowns or
signal drops.
Connect the RX to a power source using the included Type-C charging
cable.
Charge for 5-10 minutes, then try powering it on again.
If the device turns on, continue charging until fully charged (~2 hours).
2
2. Check Pairing Status:
Ensure the transmitter (TX) and receiver (RX) are successfully paired (screen
displays "Connected").
If not connected, try manual pairing: Press and hold the power buttons on
both TX and RX for 8 seconds to enter pairing mode.
3. Restart Devices:
Turn off devices by holding the power button for 3 seconds, then power
them back on.
4. Contact Support:
If the issue persists, email with your purchasesupport@syncoaudio.com
receipt and a description of the issue.
Q3: There’s significant background noise during recording/noise
cancellation isn’t working. How to fix this?
1. Enable Noise Cancellation:
Press the Noise Cancellation button on the TX to cycle through modes:
Off → Low-Level → High-Level (recommended for noisy environments).
2. Adjust Gain Settings:
3
Step 1: Connect headphones to the 3.5mm Monitoring Port on the RX .
Step 2: Press the gain adjustment button on the TX to set levels
between 0-15dB while listening to the audio in real time.
Step 3: Gradually increase the gain until the desired volume is achieved,
avoiding high levels (e.g., 12-15dB) to prevent distortion.
3. Check Microphone Connection:
Ensure external mics are fully inserted into the TRS input jack (compatible
with included lavalier mic).
4. Attach Wind Muff:
Use the included wind muff to reduce wind noise.
Why This Helps
Real-Time Feedback: Monitoring through the 3.5mm port allows you to
hear exactly how gain adjustments affect audio clarity and noise levels.
Avoid Overloading: High gain can amplify background noise. By adjusting
while listening, you can find the optimal balance between volume and
clarity.
Troubleshooting Tip: If noise persists, try switching to High-Level Noise
Cancellation and reposition the microphone closer to the sound source
(10-15cm from the mouth).
Product specificaties
| Merk: | Synco |
| Categorie: | Microfoon |
| Model: | G2 |
Heb je hulp nodig?
Als je hulp nodig hebt met Synco G2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Microfoon Synco
2 Mei 2025
27 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
29 Maart 2025
Handleiding Microfoon
- Pixel
- IMG Stage Line
- Ultimate Support
- Sonuus
- Anywhere Cart
- Saramonic
- TeachLogic
- Røde
- Eurosound
- Rode
- IK Multimedia
- Logitech
- Blue Microphones
- AVerMedia
- Cyber Acoustics
Nieuwste handleidingen voor Microfoon
16 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
11 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025