Synco CE3 Tally Light Handleiding
Pagina's 12 Niet gecategoriseerd
Bekijk de handleiding van Synco CE3 Tally Light gratis online of download de PDF. Deze handleiding is 1 keer bekeken. Vraag over dit model? Stel een vraag
CE3 Tally Light
User Manual
Thank you for choosing SYNCO product. Please read this manual carefully before use
and follow all instructions mentioned herein.
① Tally Indicator
② Power Button/Pairing Button/Tally
Light NO. Control Dial
③ Battery Level Indicator
④ USB-C Charging Port
⑤ Back Clip
⑥ Battery Compartment
⑦ Screen
Tally Light
① TX Indicator
② Pairing Button
③ Type-C Connector
④ Antenna Connector
⑤ Antenna
Transmitter
Caring For Your SYNCO Product
Product Introduction
· Please keep the product in a dry, clean, dust-free environment.
· Keep corrosive chemicals, liquids, and heat sources away from the product to
prevent mechanical damage.
· Use only a soft and dry cloth for cleaning the product.
· Malfunction may be caused by dropping, the impact of external force.
· Do not attempt to disassemble the product. Doing so voids the warranty.
· Please have the product checked or repaired by authorized technicians if any
malfunctions happen.
· Failure to follow all the instructions may result in mechanical damage.
· Warranty does not apply to human errors.
1. Install the Battery
Slide the battery compartment door downward, insert the battery, and then slide the
door back up to close it securely.
Operations
2. Power On/O
Long press the power button on the Tally light for 5 seconds until the light is on/o.
3. Install the Tally Light
1. Insert the TX into the USB-C port on the
computer/laptop.
2. Pull the back clip into the cold shoe on the
camera, etc. to x the Tally light.
Product specificaties
| Merk: | Synco |
| Categorie: | Niet gecategoriseerd |
| Model: | CE3 Tally Light |
Heb je hulp nodig?
Als je hulp nodig hebt met Synco CE3 Tally Light stel dan hieronder een vraag en andere gebruikers zullen je antwoorden