Sussex VGHM01 Handleiding

Bekijk gratis de handleiding van Sussex VGHM01 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 2 mensen. Heb je een vraag over Sussex VGHM01 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

-The Hob Mixer is supplied pre-assembled, the Clamp (I) and Fixing Nut (J) need to be temporarily removed prior

to installation.

-Maximum bench thickness is 50mm (i).

-Hob Mixer Clearance Hole: 48 - 50mm (iii).

-Mounting Surface must be flat and level.

-Tapware is to be installed by a Licensed Plumber in accordance with AS/NZS 3500:2025

-Recommended working water pressure 300 - 500 kPa. Maximum water temperature is 65°C

-After installation, ensure that tapware functions correctly without leaks.

-Please ensure a copy of the Installation Instructions are left with the end user for future reference.

VGHM.01

Virgo

Hob Mixer

Product code

Install Preparation:

Plumbers note:

-(A) Handle Body

-(B) Dome

-(C) Cartridge Locknut

-(D) Cartridge

-(E) Mixer Body

-(F) Threaded Bar

-(G) Hob Mixer Flange

-(H) Hob Mixer Clamp

-(I) Fixing Nut

-(J) Flexible hoses with 1/2” BSP Fittings with Conical Seals (K1= HOT, K2 = COLD and K3 = MIXED)

-(K) Set Screw

-(L) Handle Pin

Product parts:

AS 3718

LIC. 20081

A

F

L

M

K2

K1

K3

B

C

D

A

B

E

G

I

H

sussextaps.com.au

While we aim to ensure the specifications shown are correct at time of printing, Sussex Taps reserves the right to make modifications

without prior notice. Always use the physical product for accurate measurements. Dimensions are subject to change without notice.

All measurements are shown in millimetres. This product complies with lead free requirements.

Copyright © Sussex Taps

Product specificaties