Supermicro X8DTT-HIBQF Handleiding

Supermicro Moederbord X8DTT-HIBQF

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro X8DTT-HIBQF (91 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/91

X8DTT-H

X8DTT-HF

X8DTT-HIBX

X8DTT-HIBXF

X8DTT-HIBQ

X8DTT-HIBQF

USER’S MANUAL

Revision 1.0

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Manual Revision 1.0

Release Date: July 24, 2009

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

About This Manual

This manual is written for system integrators, PC technicians and knowledgeable PC

users. It provides information for the installation and use of the X8DTT-H

Series motherboard.

About This Motherboard

The X8DTT-H Series motherboards support the Intel 5500 Series Proces-

sor platform and the QuickPath Interconnect (QPI) Technology, providing the next

generation point-to-point system interface, replacing the current Front Side Bus.

With the 5500 Series Processor built in, the X8DTT-H/-HF/-HIBX/-HIBXF/-HIBXQ/-

HIBQF offers substantial enhancement in system performance with increased

bandwidth and unprecedented scalability optimized for HPC/Cluster, high-end serv-

ers and intensive application platforms. Please refer to our web site (http://www.

supermicro.com/products/) for updates on supported processors. This product is

intended to be installed and serviced by professional technicians.

Manual Organization

Chapter 1 describes the features, speciﬁ cations and performance of the mother-

board and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes trouble-Chapter 3

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to BIOS and provides detailed information on

running the CMOS Setup utility.

Appendix A lists BIOS POST Error Codes.

Appendix B Appendix C and provide the Windows OS and Other Software Instal-

lation Instructions.

iii

Preface

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	X8DTT-HIBQF
Breedte:	422.6 mm
Diepte:	172.7 mm
Ethernet LAN:	Ja
Aantal USB 2.0-poorten:	4
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Duurzaamheidscertificaten:	RoHS
Processor socket:	Socket B (LGA 1366)
PCI Express slots versie:	2.0
Processorfabrikant:	Intel
On-board graphics adapter model:	Matrox G200eW
ECC:	Ja
Ethernet interface type:	Gigabit Ethernet
Chipset moederbord:	Intel® 5520
PCI Express x16 slots:	1
Ondersteunde opslagstationinterfaces:	SATA
PS/2 poort(en):	1
Component voor:	Server
Geheugen voltage:	1.5 V
Soorten RAID:	0, 1,5, 10
Non-ECC:	Ja
Aantal ondersteunde processoren:	2
Intel® Xeon series:	E5500, E5600, L5500, L5600, X5500, X5600
Maximum UDIMM geheugen:	48 GB
Aantal DIMM sloten:	12
Ondersteunende RDIMM klok snelheden:	800,1066,1333 MHz
Ondersteunend DIMM module capaciteiten:	16GB, 1GB, 2GB, 4GB, 8GB
Ondersteunde geheugen types:	DDR3-SDRAM
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Supported memory clock speeds:	800,1066,1333 MHz
BIOS type:	AMI
Grootte BIOS-geheugen:	32 Mbit
ACPI version:	3.0
USB 2.0 aansluitingen:	4
IPMI LAN (RJ-45) port:	Ja
Ondersteunende UDIMM module capaciteit:	16GB, 1GB, 2GB, 4GB, 8GB
Supported QPI:	6.4 GT/s