Supermicro X11SDV-12C-TP8F Handleiding

Bekijk gratis de handleiding van Supermicro X11SDV-12C-TP8F (1 pagina’s), behorend tot de categorie Moederbord. Deze gids werd als nuttig beoordeeld door 32 mensen en kreeg gemiddeld 4.3 sterren uit 7 reviews. Heb je een vraag over Supermicro X11SDV-12C-TP8F of wil je andere gebruikers van dit product iets vragen? Stel een vraag

SUPERMICR R

ContaCt nformatIonI

• Manuals: http://www.supermicro.com/support/manuals

• Drivers & Utilities:

https://www.supermicro.com/wftp/driver/

• Safety: http://www.supermicro.com/about/policies/safety_information.cfm

© 2018 Supermicro Computer Inc. All rights reserved. Reproduction of this document whether in part or in whole is strictly prohibited without Supermicro's written

consent. All Trademarks are property of their respective entities. All information provided is deemed accurate at the time of printing; however, it is not guaranteed.

P CaCkage ontents

X11sDV-4C/8C/12C/16C-tP8f

Q r g 1.0uICk eferenCeuIDeb

• One (1) Supermicro Motherboard

• Four (4) SATA Cables

• One (1) I/O Shield

• One (1) Quick Reference Guide

• Website: www.supermicro.com

• General Information: marketing@supermicro.com

• Technical Support: suppo[email protected]

• Phone: +1 (408) 503-8000, Fax: +1 (408) 503-8008

f or your system to work ProPerlyPlease DownloaD aPProPrIate,

DrIVers Images usersmanualfromthelInksbelow//' :

MNL-2007-QRG-10b

• Two (2) Mini-SAS HD Cables

WARNING: This product can expose you to chemicals including

lead, known to the State of California to cause cancer and birth

defects or other reproductive harm. For more information, go

to www.P65Warnings.ca.gov.

!

BAR CODE

MADE IN USA

X11SDV-8C-TP8F

REV:1.02

2

1

JSIM1

G2

G3

G4 G1

S3

S5

S6

S1

S2

S4

S-SATA0

S-SATA1

S-SATA3

S-SATA2

LEDT1

C

A

LEDT3

A

C

LED3

A

C

LED1

A

C

LED2

A

C

JMD1_SRW1

JMD2_SRW1

PRESS FITPRESS FIT

JPH1

JMD2

2

JPV1

BT1

SFP1

PRESS FIT

JSMB1

1

JI2C1

JPL1

JI2C2 JPME2

1

JWD1

JPUSB1

LEDM1

LEDT4

A

C

LEDT2

A

C

JMP1

JNVI2C1

CPU SLOT6 PCI-E 3.0 X16JLANLED1

JL1

JPW1

JPI2C1

JBT1

JPG1

JNS1

JTGLED2

JTGLED1JIPMB1

COM1

JSD1

JF1

16

JD1

FANB

FANA

FAN4 FAN3

FAN1

FAN2

JMP1_SRW1 JMP1_SRW2

:LEDPWR

I-SATA4-7I-SATA0-3

M.2-H

PCI-E 3.0 X2/S-SATA4

CPU

UID

VGA

DIMMB1

DIMME1

USB 0/1

DIMMD1

DIMMA1

PCI-E 3.0 X1

CPU SLOT6 PCI-E 3.0 X16

CPU SLOT7 PCI-E 3.0 X8

2-3:DISA

1-2:E

JPB1:(deb only)

PCI-E 3.0 X4 / S-SATA5

JMD1:M.2-HC

1-3:PWR LED

4-7:SPEAKER

:SUPER DOM

PWR

ON

OH

FF

XRST NIC1NIC2

JF1: PWR

LEDLED

HDD

2-3:DISABLE

1-2:ENABLE

JPL1:

LAN1/2/3/4

JSTBY1

LAN 1/2

LAN 7/8

LAN 5/6

LAN 3/4IPMI_LAN

USB 4/5 (3.0)

S-SGPIO1

JTPM1 JGP1

USB 2/3

Connectors

DIMM Memory Installation

Jumpers and Connectors

Memory Support

Motherboard Layout and Features

Jumpers

Note: Graphics shown in this quick reference guide are for illustration only. Your components may or may not look exactly the same as drawings shown in this

guide.

Note: Refer to Chapter 1 of the User Manual for detailed information on jumpers, connectors,

and LED indicators.

Note: Refer to Chapter 2 of the User Manual for detailed information on memory support and CPU/

motherboard installation instructions.

Front Control Panel (JF1)

CPU Support

LED Indicators

The X11SDV-4C/8C/12C/16C-TP8F motherboard supports up to 256GB of ECC

RDIMM and 512GB of ECC LRDIMM DDR4 memory.

When installing memory modules, the DIMM slots should be populated in the

following order: DIMMA1, DIMMB1, DIMMD1, DIMME1.

• Always use DDR4 DIMM modules of the same type, size, and speed.

• Mixed DIMM speeds can be installed. However, all DIMMs will run at the

speed of the slowest DIMM.

• The motherboard will support odd-numbered modules (one or three modules

installed). However, for best memory performance, install DIMM modules in

pairs to activate memory interleaving.

The X11DV-4C/8C/12C/16C-TP8F motherboard supports an Intel® Xeon®

D-2100 Series SoC.

Connector Description

BT1Onboard Battery

COM1COM Header

FAN1 - FAN4, FANA, FANBSystem Fan Connectors

IPMI_LANDedicated IPMI LAN Port

I-SATA0-3, I-SATA4-7Eight Intel® PCH SATA 3.0 Ports or Two NVMe U.2 Ports

(See jumper JNS1 setting)

JD1PWR LED/Speaker Header (Pins 1-3: PWR LED, Pins 4-7: Speaker)

JF1Front Control Panel Header

JGP1General Purpose I/O Header

JIPMB1System Mangement Bus Header (for IPMI only)

JL1Chassis Intrusion Header

JLANLED1LAN1 - LAN4 Activity LED Header

JMD1M.2 PCI-E 3.0 x4/S-SATA5 Connector (M-Key 2280)

JMD2M.2 PCI-E 3.0 x2/S-SATA4 Connector (B-Key 3042)

JMD1_SRW1, JMD2_SRW1M.2 Holding Screws

JMP1Mini PCI-E p1-x1 Connector

JMP1_SRW1Mini PCI-E p1-x1 Connector Holding Screw

JNVI2C1NVMe I2C Header

JPI2C1Power I2C System Management Bus (Power SMB) Header

JPH14-pin Power Connector for HDD use

JPW124-pin Main Power Connector

JPV112V 8-pin DC Power Connector (Required to provide extra power to

CPU, or as alternative power for special enclosure when the 24 pin ATX

power is not in use)

JSD1SATA Disk On Module (DOM) Power Connector

JSIM1Nano SIM Slot for M.2 B-Key WAN card support

JSMB1System Management Bus Header

JSTBY1+5V Standby Power Header

JTGLED1LAN7/LAN8 Activity LED Header

JTGLED2LAN5/LAN6 Activity LED Header

JTPM1Trusted Platform Module (TPM)/Port 80 Header

LAN1 - LAN41GbE (RJ45) LAN Ports

LAN5 - LAN610GbE (RJ45) LAN Ports

LAN7 - LAN810G SFP+ LAN Ports

S-SATA0 - S-SATA3SATA 3.0 Ports

Jumper DescriptionDefault

JBT1CMOS ClearOpen: Normal, Short: Clear CMOS

JI2C1, JI2C2SMB to PCI-E Slots Enable/DisablePins 2-3 (Disabled)

JNS1Mini-SAS HDD NVMe/SATA Mode SelectPins 1-2: SATA (Default), Pins 2-3: NVMe

JPG1Onboard VGA EnablePins 1-2 (Enabled)

JPL1LAN 1/2/3/4 EnablePins 1-2 (Enabled)

JPME2ME Manufacturing ModePins 1-2 (Normal)

JPUSB1USB Wake UpPins 1-2 (Enabled)

JWD1Watch DogPins 1-2 (Reset)

Connectors and LED Indicators

LED DescriptionStatus

LED1Power LEDSolid Green: Power On

LED2UID LEDSolid Blue: Unit Identied

LED3Overheat/PWR Fail/Fan FailSolid Red: Overheat

Blinking Red: PWR Fail or Fan Fail

LEDM1BMC HeartbeatBlinking Green: BMC Normal

Back Panel I/O Connectors

1

9

8

7

6

5

4

3

2

10

Connectors

Connector Description

S-SGPIO1Serial General Purpose I/O Header for S-SATA0-3

SLOT6CPU PCI-E 3.0 p1-x16 Slot

SLOT7CPU PCI-E 3.0 p1-x8 Slot

UID Unit Identier Button

USB0/1, USB2/3Front Accessible USB 2.0 Ports

USB4/5Back Panel USB 3.0 Ports

VGAVGA Port

1211

###Description Description Description

159IPMI_LAN LAN1LAN5

26USB5LAN410SFP LAN8

37USB4LAN311SFP LAN7

48LAN2LAN612 VGA

Power Button

OH/Fan Fail LED

NIC1 Activity LED

Reset Button

HDD LED

PWR LED

Reset

PWR

3.3V Stby

3.3V Stby

Ground

15

3.3V Stby

16

1 2

Ground

NIC2 Activity LED

PWR Fail LED

UID

3.3V

3.3V

= mounting hole

Product specificaties