Supermicro SuperServer 2028U-E1CNRT+ Handleiding

Supermicro Server SuperServer 2028U-E1CNRT+

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro SuperServer 2028U-E1CNRT+ (16 pagina's) in de categorie Server. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

Information for Lot 9 of d )ErP (Eco esign

This addendum addresses E European Union (EU) codesign requirements for servers and storage

products addendum product. All and ratings within this data are in reference only Supermicro to the (s) in

the manual. The below information conforms ommission to requirements laid down Cin Annex II of the

R . egulation 2019/424

3(1)(a): e See Section 1.1 of th system manual for the product type.

3(1)(b): See the title page and preface of the system manual for the trademark and

manufacturer’s address.

3(1)(c): (s). See the title page of the system manual for product model number

3(1)(d): . See the serial number on the physical system to determine the year of manufacture

3(1)(e-j): PSU E actor V ) (F fficiency and Power F alue (Table rom 80 Plus report)

PSU Model #: - - PWS 1K02A 1R

Watts: 1000W PSU E fficiency

P Fower actor

% of R Lated oad

%10

20 50 100 % % %

50 %

Single -Output (AC DC)

91.88%

94.24%

96.33%

93.93%

0.99

E P System (EUT) fficiency in I Sdle tate ower (Table)

Representative

Configurations

Measured Idle State

Power (W)

Calculated Idle Power

Allowance (W)

High-End Performance

Configuration

331.9

439.85

Typical Configuration

213.6

319.28

Low-End Performance

Configuration

205.2

262.15

System E P(EUT) fficiency in A Sctive tate ower (Table)

Representative

Configurations

Active tate S

E Score fficiency

(Effserver)

Minimum A Sctive tate

Efficiency for 2-Socket

S erver

High-End Performance

Configuration

26.0

Typical Configuration

25.8

9.5

Low Performance -End

Configuration

20.0

3(1)( is k): The operating condition class A2.

Dry °Cbulb temp

Humidity range, non-condensing

Operati

conditi

Allowab

range

Reco

m

mend

Allowable range

Recommended

range

Max

dew

point (°

Maximu

rate

change

15 32-

18 27-

–

12 °C P Dew oint (DP)

and

8 % relative

humidity (RH) to

17 80°C DP and % RH

–

9 °C DP to

15 °C DP

and

60 %

5/20

10 35-

18 27-

–

12 °C 8 % DP and RH

21 80 °C DP and %

Same as A1

5/20

5-40

18 27-

–

12 °C 8 % DP and RH

24 85 °C DP and %

Same as A1

5/20

5-45

18 27-

–

12 °C 8 % DP and RH

24 90 °C DP and %

Same as A1

5/20

3(1)(l): The idle state power at the higher boundary temperature of the operating conditions

class is 331.9W.

3(1)( is 26m): The active state efficiency and performance .0.

3(1)(n): There are two methods by which a user can securely delete data from this system. The

user performing secure data deletion should be an IT professional.

The first is with a Unified Extensible Firmware Interface (UEFI) shell utility. This utility

works on X10/X11/H11/H12/M11 motherboard series with onboard SATA/NVMe devices.

Any user may access and download this utility through following link:

https://www.supermicro.com/about/policies/disclaimer.cfm?url=/wftp/utility/Lot9_Secure

_Data_Deletion_Utility/

Download the shell utility package and extract it to a USB flash drive, then plug the drive

into the server for which secure data deletion is necessary. Then turn the system on.

Navigate to the BIOS setup menu, then place the server system into the UEFI shell

environment. Follow the instructions in the README file to invoke the utility and

complete the deletion.

The second method is through the secure data deletion tool provided by the original

manufacturer of the hard drive. This should be used in a scenario where the shell utility

is not applicable. Each manufacturer should have the tool available on their website. If

needed, please look on the hard drive label for the name of the manufacturer and model

information.

3(1)(o): List of recommended combinations of blade servers with chassis: N/A.

3(1)(p): : List of all current SKUs within this product family

SKUs

SYS 2028U- -T

SYS 2028U- - E1C

Models

SYS 2028U- - TR4+

SYS 2028U E1CNR4T+- -

SYS 2028U- - TRT+

SYS 2028U- - E1CNRT+

SYS 2028U- - TR4T+

SYS 2028U- - TRTP+

SYS 2028U- - TNRT+

SYS 2028U- - TNR4T+

SYS 2028U TN24R4T+- -

3(3)(a): There is no use of cobalt in batteries in this product.

The indicative weight range of eodymium in the HDD is if manufactured by Western n 0.0

Digital, and is 25 grams if manufactured by Seagate.between 5-

3(3)(b): Please see the disassembly instructions on the next page.

Product specificaties

Merk:	Supermicro
Categorie:	Server
Model:	SuperServer 2028U-E1CNRT+
Kleur van het product:	Zwart
Gewicht:	16400 g
Breedte:	437 mm
Diepte:	705.3 mm
Hoogte:	89 mm
Gewicht verpakking:	32700 g
LED-indicatoren:	HDD, Network, Power
Stroom:	5 - 9.8 A
Aan/uitschakelaar:	Ja
Ethernet LAN:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	2
Certificering:	UL/cUL/CB/BSMI/CE/CCC
Netvoeding:	1000 W
Duurzaamheidscertificaten:	RoHS
Plug and play:	Ja
Type processor:	Nee
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000,10000 Mbit/s
Temperatuur bij opslag:	-40 - 70 °C
Aantal ventilatoren:	4 ventilator(en)
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	3
Processor socket:	LGA 2011 (Socket R)
Systeembus:	9.6 GT/s
PCI Express slots versie:	3.0
Maximum intern geheugen:	3000 GB
On-board graphics adapter model:	Aspeed AST2400
Luchtvochtigheid bij opslag:	5 - 95 procent
Reset button:	Ja
Type behuizing:	Rack (2U)
80 PLUS certificatie:	80 PLUS Titanium
Redundante voeding:	Ja
ECC:	Ja
Geheugen form factor:	288-pin DIMM
Ethernet interface type:	10 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet
Chipset moederbord:	Intel® C612
Koperen ethernetbekabelingstechnologie:	10BASE-T, 10GBASE-T, 100BASE-TX, 1000BASE-T
Ondersteunde opslagstationinterfaces:	Serial Attached SCSI (SAS)-3
Seriële poort(en):	1
PCI Express x8 slots:	7
Geheugen voltage:	1.2 V
LAN controller:	Intel X540, Realtek RTL8211E
Soorten RAID:	0, 1,5, 6,10, 50, 60
Geheugenbus:	72 Bit
Compatibele processors:	Intel® Xeon®
Aantal ondersteunde processoren:	2
Intel® Xeon series:	E5-2600
Maximum UDIMM geheugen:	1500 GB
Aantal DIMM sloten:	24
Ondersteunende RDIMM klok snelheden:	1600,1866,2133,2400 MHz
Ondersteunend DIMM module capaciteiten:	1GB, 2GB, 4GB, 8GB, 16GB, 32GB, 64GB, 128MB
Aantal storage drives ondersteund:	24
Opslagschijf afmetingen ondersteund:	2.5 "
Ondersteunde geheugen types:	DDR4-SDRAM
Hot-swap HDD bays:	Ja
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Aantal geïnstalleerde redundante voedingen:	1
Type systeembus:	QuickPath Interconnect (QPI)
Code geharmoniseerd systeem (HS):	84714100
Ventilator diameter:	80 mm
Ondersteunde types opslag-drives:	HDD & SSD
BIOS type:	AMI
Grootte BIOS-geheugen:	16 Mbit
ACPI version:	4.0
Systeem Management BIOS (SMBIOS) versie:	2.7.1
PC gezondheids monitor:	CPU, FAN, LED, Temperature, Voltage
DC output stroom (+ 12 V):	83 A
Intelligent Platform Management Interface (IPMI) support:	Ja
Geïntegreerde BMC met IPMI:	Ja
Aantal Internal USB 3.2 Gen 1 (3.1 Gen 1) ports:	2
IPMI LAN (RJ-45) port:	Ja
Koellichaam inclusief:	Ja
Afmetingen voeding (BxDxH):	73.5 x 203 x 40 mm
Maximale cache:	55 MB
Aantal SAS-poorten:	24
BIOS-functies:	APM 1.2, PCI 2.3, Plug & Play, SMBIOS 2.7.1, UEFI
UEFI-versie:	2.3.1