Supermicro A+ Server 1114S-WTRT Handleiding

Supermicro Server A+ Server 1114S-WTRT

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro A+ Server 1114S-WTRT (13 pagina's) in de categorie Server. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13

Information for Lot 9 of d )ErP (Eco esign

This addresses Ecodesign addendum European Union (EU) requirements for servers and storage products.

All data and ratings within this addendum are in reference only to the in thSupermicro product(s) e

manual. the The below information conforms with requirements laid down in Annex II of Commission

Regulation . 2019/424

3(1)(a): See Section 1.1 of the system manual for the product type.

3(1)(b): e See the title page and preface of th system manual for trademark and the

manufacturer’s address.

3(1)(c): See the title page of the system manual for product model number(s).

3(1)(d): See the serial number on the physical system to determine the year . of manufacture

3(1)(e-j ): PSU Efficiency V ) (F and Power Factor alue (Table rom 80 Plus report)

PSU Model #: PWS- - 504P 1R

Watts: 500W

PSU E fficiency

P F ower actor

% of R Lated oad

20 %

50 %

100

50 %

Single -Output (AC DC)

86.16 %

91.84 %

94.11 %

92.61%

0.97

System (EUT) E P fficiency in I Sdle tate ower (Table)

Representative

Configurations

Measured Idle State

Power (W)

Calculated Idle Power Allowance

(W)

High-End Performance

Configuration

191

374.85

Typical Configuration

N/A

Low-End Performance

Configuration

119

204.37

System E(EUT) fficiency in A Sctive tate P ower (Table)

Representative

Configurations

Active tate S

E Sfficiency core

(Effserver)

Minimum A Sctive tate Efficiency for

2-S S ocket erver

High-End Performance

Configuration

56.1

Typical Configuration

N/A

Low-End Performance

Configuration

3(1)( ): k is . The operating condition class A2

Dry bulb temp °C

Humidity range, non condensing-

Operating

condition

class

Allowable

range

Recom 

mended

range

Allowable range

Recommended range

Max dew

point (°C)

Maximum

rate of

change

(°

C/hr)

15 32-

18 27-

–

12 and °C P Dew oint (DP)

8 % relative humidity (RH) to

17 ° and 80 C DP % RH

–

9 °C DP to

15 °C and DP

60 % RH

5/20

10 35-

18 27-

–

12 and °C DP 8 % RH to

21 and 80 °C DP % RH

Same as A1

5/20

5-40

18 27-

–

12 and °C DP 8 % RH to

24 and 85 °C DP % RH

Same as A1

5/20

5-45

18 27-

–

12 and °C DP 8 % RH to

24 and 90 °C DP % RH

Same as A1

5/20

3(1)( ): l The idle state power at the higher boundary temperature of the operating conditions

class is 2 . W. 25 38

3(1)( ): m The active state efficiency and performance is 56.1.

3(1)(n): There are two methods by which a user can securely delete data from this system. The

user performing secure data deletion should be an IT professional.

The first is with a Unified Extensible Firmware Interface (UEFI) shell utility. This utility

works on X10/X11/H11/H12/M11 motherboard series with onboard SATA/NVMe devices.

Any user may access and download this utility through following link:

https://www.supermicro.com/about/policies/disclaimer.cfm?url=/wftp/utility/Lot9_Secure

_Data_Deletion_Utility/

Download the shell utility package and extract it to a USB flash drive, then plug the drive

into the server for which secure data deletion is necessary. Then turn the system on.

Navigate to the BIOS setup menu, then place the server system into the UEFI shell

environment. Follow the instructions in the README file to invoke the utility and

complete the deletion.

The second method is through the secure data deletion tool provided by the original

manufacturer of the hard drive. This should be used in a scenario where the shell utility

is not applicable. Each manufacturer should have the tool available on their website. If

needed, please look on the hard drive label for the name of the manufacturer and model

information.

3(1)( ): o List of recommended combinations of blade servers with chassis: N/A.

3(1)(p): List of all current SKUs within this product family: N/A.

3(3)(a): There is no use of cobalt in batteries in this product.

The indicative weight range of eodymium in the HDD is n 0.0 if manufactured by Western

Digital, and is between 5- 25 grams if manufactured by Seagate.

3(3)(b): Please see the disassembly instructions on the next page.

Product specificaties

Merk:	Supermicro
Categorie:	Server
Model:	A+ Server 1114S-WTRT
Kleur van het product:	Zwart
Breedte:	437 mm
Diepte:	597 mm
Hoogte:	43 mm
Gewicht verpakking:	20900 g
LED-indicatoren:	Ja
Stroom:	2.6 - 6.1 A
Aan/uitschakelaar:	Ja
Processorfamilie:	AMD
Ethernet LAN:	Ja
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Netvoeding:	500 W
Duurzaamheidscertificaten:	RoHS
Type processor:	Nee
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000,10000 Mbit/s
Temperatuur bij opslag:	-40 - 60 °C
Aantal ventilatoren:	4 ventilator(en)
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A:	7
Processor socket:	Socket SP3
PCI Express slots versie:	4.0
Maximum intern geheugen:	2000 GB
On-board graphics adapter model:	Aspeed AST2500
Luchtvochtigheid bij opslag:	5 - 95 procent
Type behuizing:	Rack (1U)
80 PLUS certificatie:	80 PLUS Platinum
Redundante voeding:	Ja
ECC:	Ja
Geheugen form factor:	288-pin DIMM
Ethernet interface type:	10 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet
Aantal 2.5" bays:	10
PCI Express x16 slots:	3
Type koeling:	Actief
Ondersteunde opslagstationinterfaces:	PCI Express, Serial ATA III
LAN controller:	Broadcom 57416
Aantal hoofdvoedingen:	1
Aantal SATA III connectors:	2
Compatibele processors:	AMD EPYC
Aantal ondersteunde processoren:	1
Aantal DIMM sloten:	8
Ondersteunende RDIMM klok snelheden:	3200 MHz
Aantal storage drives ondersteund:	12
Opslagschijf afmetingen ondersteund:	2.5, M.2 "
Ondersteunde geheugen types:	DDR4-SDRAM
Hot-swap HDD bays:	Ja
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Aantal geïnstalleerde redundante voedingen:	1
Code geharmoniseerd systeem (HS):	84714100
Ventilator diameter:	40 mm
Ondersteunde types opslag-drives:	HDD & SSD
BIOS type:	AMI
Grootte BIOS-geheugen:	32 Mbit
PC gezondheids monitor:	CPU, FAN, Temperature
Aantal M.2 (M) slots:	2
DC output stroom (+ 12 V):	42 A
Geïntegreerde BMC met IPMI:	Ja
Backplanes ondersteund:	Ja
IPMI LAN (RJ-45) port:	Ja