Supermicro 6016GT-TF Handleiding

Supermicro Server 6016GT-TF

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro 6016GT-TF (106 pagina's) in de categorie Server. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/106

SUPER

S SUPER ERVER 6016XT-TF

S SUPER ERVER 6016GT-TF

S SUPER ERVER 6016GT-TF-TM2

S SUPER ERVER 6016GT-TF-TC2

USER’S MANUAL

Revision 1.0a

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and docu-

mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.

Any use or reproduction of this product is not allowed, except as expressly permitted by the terms

of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the manufacturer’s instruction manual, may cause harmful interference

with radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-

ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

Manual Revision 1.0a

Release Date: May 27, 2010

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians.

It provides information for the installation and use of the SuperServer 6016XT-

TF/6016GT-TF/6016GT-TF-TM2/6016GT-TF-TC2. Installation and maintenance

should be performed by experienced technicians only.

The SuperServer 6016XT-TF/6016GT-TF/6016GT-TF-TM2/6016GT-TF-TC2 is

based on the SC818GTQ-1400B 1U rackmount server chassis and the Super

X8DTG-DF serverboard. Please refer to our web site for an up-to-date list of sup-

ported operating systems, processors and memory.

Manual Organization

Chapter 1: Introduction

The ﬁ rst chapter provides a checklist of the main components included with the

server system and describes the main features of the Super X8DTG-DF serverboard

and the SC818GTQ-1400B chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install the system into a rack and

check out the server conﬁ guration prior to powering up the system. If your server

was ordered without the processor and memory components, this chapter will refer

you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the

system.

iii

Preface

Product specificaties

Merk:	Supermicro
Categorie:	Server
Model:	6016GT-TF
Kleur van het product:	Zwart
Gewicht:	17200 g
Breedte:	437 mm
Diepte:	716 mm
Hoogte:	43 mm
Processorfamilie:	Intel® Xeon®
Ethernet LAN:	Ja
Aantal USB 2.0-poorten:	4
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	3
Certificering:	RoHS, 80+
Netvoeding:	1400 W
Soort voeding:	AC/DC
Temperatuur bij opslag:	-40 - 70 °C
Processor socket:	Socket B (LGA 1366)
Systeembus:	6.4 GT/s
Maximum intern geheugen:	192 GB
Soort optische drive:	Nee
On-board graphics adapter model:	Matrox G200eW
Luchtvochtigheid bij opslag:	5 - 95 procent
Type behuizing:	Rack (1U)
Aantal voedingen:	1
Redundante voeding:	Nee
ECC:	Ja
Geheugen form factor:	240-pin DIMM
Ethernet interface type:	Gigabit Ethernet
Chipset moederbord:	Intel® 5520
Seriële poort(en):	1
PCI Express x4 slots:	1
LAN controller:	Intel® 82576
Soorten RAID:	5, 10
Non-ECC:	Ja
Aantal ondersteunde processoren:	2
Maximum UDIMM geheugen:	192 GB
Aantal DIMM sloten:	12
Ondersteunende RDIMM klok snelheden:	800,1066,1333 MHz
Ondersteunend DIMM module capaciteiten:	16GB, 1GB, 2GB, 4GB, 8GB
Aantal storage drives ondersteund:	6
Opslagschijf afmetingen ondersteund:	3.5 "
Ondersteunde geheugen types:	DDR3-SDRAM
Hot-swap HDD bays:	Ja
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
BIOS type:	AMI
Grootte BIOS-geheugen:	32 Mbit
ACPI version:	3.0
On-board graphics adapter geheugen:	12 MB
Geheugen spiegeling ondersteuning:	Ja