Sunbeam Verve SR6805 Handleiding

Sunbeam Strijkijzer Verve SR6805

Lees hieronder de 📖 handleiding in het Nederlandse voor Sunbeam Verve SR6805 (13 pagina's) in de categorie Strijkijzer. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13

VERVE®

IRON

SR6805

User Guide

SR6805 Sunbeam Resilium®

Contents

Sunbeam’s Safety Precautions 3

Features of your Verve Iron 4

Using your Verve Iron 6

The Safety Auto-Off Feature 7

Care and Cleaning of your Verve Iron 8

Ironing Tips & Tricks 9

Ironing Chart 10

If you have any concerns regarding the performance and use of your appliance,

please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line.

Ensure the above safety precautions are understood.

Sunbeam is very safety conscious when

designing and manufacturing consumer products,

but it is essential that the product user also

exercise care when using an electrical appliance.

Listed below are precautions which are essential

for the safe use of an electrical appliance:

• Read carefully and save all the instructions

provided with an appliance.

• Always turn the power off at the power outlet

before you insert or remove a plug. Remove

by grasping the plug - do not pull on the cord.

• Turn the power off and remove the plug

when the appliance is not in use and before

cleaning.

• Do not use your appliance with an extension

cord unless this cord has been checked and

tested by a qualified technician or service

person.

• Always use your appliance from a power

outlet of the voltage (A.C. only) marked on the

appliance.

• This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they

have been given supervision or instruction

concerning use of the appliance by a person

responsible for their safety.

• Children should be supervised to ensure that

they do not play with the appliance.

• The temperature of accessible surfaces may be

high when the appliance is operating.

• Never leave an appliance unattended while

in use.

• Do not use an appliance for any purpose

other than its intended use.

• Do not place an appliance on or near a hot gas

flame, electric element or on a heated oven.

• Do not place on top of any other appliance.

• Do not let the power cord of an appliance hang

over the edge of a table or bench top or touch

any hot surface.

• Do not operate any electrical appliance with

a damaged cord or after the appliance has

been damaged in any manner. If damage is

suspected, return the appliance to the nearest

Sunbeam Appointed Service Centre for

examination, repair or adjustment.

• For additional protection, Sunbeam

recommend the use of a residual current

device (RCD) with a tripping current not

exceeding 30mA in the electrical circuit

supplying power to your appliances.

• Do not immerse the appliance in water

or any other liquid unless recommended.

• Appliances are not intended to be operated

by means of an external timer or separate

remote control system.

• This appliance is intended to be used in

household and similar applications such

as: staff kitchen areas in shops, offices and

other working environments; farm houses; by

clients in hotels, motels and other residential

type environments; bed and breakfast type

environments.

Sunbeam’s Safety Precautions

SAFETY PRECAUTIONS FOR YOUR IRON

• Do not leave a hot iron within reach of children.

If they come into contact with a hot iron it

could lead to serious burns.

• Iron only on an ironing board.

• An iron takes approximately 30 minutes to cool

down. Allow the iron to cool completely before

storing.

• Do not wind the cord around the soleplate

while the iron is still hot.

• Do not leave the iron unattended while it is

plugged into the power outlet.

• Always unplug the iron from the power outlet

before filling or emptying the water tank.

• The iron must be used and rested on a stable

surface.

• The iron is not to be used if it has been

dropped, if there are visible signs of damage

or if it is leaking.

Product specificaties

Merk:	Sunbeam
Categorie:	Strijkijzer
Model:	Verve SR6805

Heb je hulp nodig?

Als je hulp nodig hebt met Sunbeam Verve SR6805 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Strijkijzer Sunbeam

Sunbeam Verve 680 SRA6800 Handleiding

30 Augustus 2023

Sunbeam PressXPress STC5000 Handleiding

30 Augustus 2023

Sunbeam Verve 650 CeraFlow SRC6500 Handleiding

30 Augustus 2023

Sunbeam Verve 655 SRS6550 Handleiding

30 Augustus 2023

Sunbeam Simple Press 3050 Handleiding

14 Juni 2023

Sunbeam Verve SR6585 Handleiding

1 Juni 2023

Sunbeam Steam Master LX 4059 Handleiding

30 Mei 2023

Sunbeam Pro Steam Travel SR2300 Handleiding

25 Mei 2023

Sunbeam Pro Steam SR4400 Handleiding

25 Mei 2023

Sunbeam Pro Steam Compact SRS2000 Handleiding

9 Mei 2023

Handleiding Strijkijzer

Nieuwste handleidingen voor Strijkijzer

Di4 Jet Pressing 2850W Handleiding

15 April 2024

Di4 Vapore Stiro 3000 Handleiding

15 April 2024

Di4 Jet Pressing Infinity Handleiding

15 April 2024

Di4 Jet Pressing Facile Handleiding

15 April 2024

Di4 Jet Pressing Pro 5b Handleiding

15 April 2024

Melissa 16390057 Handleiding

11 April 2024

Hacienda CSI232 Handleiding

11 April 2024

Bosch Serie 8 VarioComfort TDS8060DE Handleiding

9 April 2024

Essentiel B Iris EFV 2402 Handleiding

9 April 2024

Philips Perfective GC5010 Handleiding

5 April 2024