Sun Joe 24V-HCSWP-6-LTE Handleiding
Sun Joe
Zaagmachine
24V-HCSWP-6-LTE
Bekijk gratis de handleiding van Sun Joe 24V-HCSWP-6-LTE (20 pagina’s), behorend tot de categorie Zaagmachine. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 4.4 sterren uit 3 reviews. Heb je een vraag over Sun Joe 24V-HCSWP-6-LTE of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/20
Model 24V-HCSWP-6-LTE Form No. SJ-24V-HCSWP-6-LTE-880E-M
OPERATOR’S MANUAL
CORDLESS TELESCOPING
POLE + PRUNING SAW
24V* IONMAX | 2.0 Ah | 6-INCH
Original instructions.
© 2023 Snow Joe, LLC. All rights reserved.
1
A Division of Snow Joe, LLC
*DISCLAIMER: Initial no-load voltage, when fully charged,
peaks at 24V; nominal voltage under typical load is 21.6V.
SAVE THESE INSTRUCTIONS
R
TM
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may result
in serious bodily injury or death.
General Safety
mWARNING! This appliance is not intended for use
by children or by unassisted, unsupervised persons whose
physical, sensory or mental capabilities prevent them from using
it safely. Children should be supervised to ensure that they do
not play with the appliance.
Before starting up your machine, please check it carefully
for any defects. If you find any, do not start up your machine.
Contact your authorized Snow Joe
®
+ Sun Joe
®
dealer or
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
mWARNING! When using the power tool, basic safety
precautions should always be followed to reduce the risk of fire,
electric shock, and personal injury. These include:
1. Keep work area clean and well-lit – Cluttered, dark areas
invite accidents. Always inspect the area where the pole +
pruning saw is to be used.
2. Avoid dangerous environments – Do not use the power
tool in rain, in damp or wet locations, or in bad weather,
especially when there is a risk of lighting. This decreases the
risk of being struck by lighting. Do not operate the power tool
in gaseous or explosive atmospheres or use the power tool
near flammable or combustible liquids. Motors in these tools
may spark, and the sparks might ignite fumes.
3. Know your product – Know how to start and stop the
machine. Be thoroughly familiar with the controls.
4. Keep children, bystanders, and pets away –
All spectators, including pets, should be kept a safe distance
away from the work area.
5. Dress properly – Do not wear loose clothing or jewelry. They
can get caught in moving parts. Protective rubber gloves and
non-slip footwear are recommended when working outdoors.
6. Avoid Slipping – Exercise caution to avoid slipping or falling.
Wear protective footwear that will protect your feet and
improve your footing on slippery surfaces.
7. Stay alert – Watch what you are doing. Use common sense.
Do not operate the power tool when you are tired,
or under the influence of alcohol or drugs.
8. Do not overreach – Keep proper footing and balance at
all times.
9. Prevent unintentional starting – Do not pull the trigger
before connecting to battery pack, picking up or
carrying the appliance. Do not carry the pole + pruning
saw with your finger on the trigger.
10. Use the right appliance – Do not use the power tool for any
applications other than those for which it was intended.
11. The chain is sharp – Don't grasp the exposed chain or
cutting edges when picking up or holding the power tool.
12. Use two hands – Hold the telescoping pole and handle with
both hands to avoid loss of control.
13. Remove the battery – Remove the battery from the power
tool when it is not in use, before servicing it, when changing
accessories, and when performing any other maintenance
task.
14. Use safety glasses – Also use safety footwear, snug-fitting
clothing, protective gloves, hearing and head protection.
15. Use head protection – Always use head protection when
operating the power tool overhead. Falling debris can result
in serious personal injury.
16. Do not force the tool – It will perform better with less
likelihood of personal or mechanical injury if it is used at the
rate for which it was designed.
17. Check for damaged parts – Before further use of the
appliance, all guards and parts should be carefully checked
to determine that it will operate properly and perform its
intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting, and
any other condition that may affect its operation. A guard
or other part that is damaged should be properly repaired
or replaced. Contact the Snow Joe
®
+ Sun Joe
®
customer
service center at 1-866-SNOWJOE (1-866-766-9563) for
assistance.
18. Maintain the power tool with care – Keep the cutting edges
sharp and clean for optimal performance and to reduce the
risk of injury. Keep the handles dry, clean, and free from
oil and grease. Follow the additional recommendations
described in the maintenance section
of this manual.
2
19. Store indoors – When not in use, the power tool should be
stored indoors in a dry and high or locked-up place out of
the reach of children.
20. Do not use the power tool if the trigger does not turn it
on and off. Any power tool that cannot be controlled is
dangerous and must be repaired.
21. Keep all parts of the body away from the chain. Do not remove
cut material or hold material to be cut while the chain is moving.
Make sure the switch is off when clearing jammed material. The
chain will continue moving for a while after the tool is turned
off. A moment of inattention while operating the power tool may
result in serious personal injury.
22. Carry the power tool by the handle with the chain stopped.
When transporting or storing the power tool, always keep the
chain and guide bar in the bar sheath. Proper handling of the
pole + pruning saw will reduce the chance of personal injury.
23. Hold the product by insulated surfaces only. In the event that
the chain comes into contact with hidden wiring, exposed
metal parts of the product may become “live” and give the
operator an electric shock.
24. The unit has not been designed to provide protection from
electric shock in the event of contact with overhead electric
lines. Never use the power tool near any electrical power
lines. Contact with or use near power lines may cause
serious injury or electric shock resulting in death. Maintain a
minimum clearance of 50 ft (15 m) from all power lines.
25. Do not modify or attempt to repair the appliance or the
battery pack (as applicable) except as indicated in the
instructions for use and care.
mWARNING! Before inspecting, cleaning, or servicing the
machine, remove the battery and wait for all moving parts to
stop. Failure to follow these instructions can result in serious
personal injury or property damage.
mWARNING! Do not use this appliance without reading this
instruction manual.
mWARNING! Do not use the appliance within range of
persons unless they are wearing protective clothing.
mWARNING! Do not operate the cordless power tool in a
tree, on a ladder, or on scaffolding. Using the tool under such
circumstances is extremely dangerous.
mWARNING! Do not let familiarity with this type of tool
prevent you from taking all necessary precautions. Remember
that a careless fraction of a second is sufficient to inflict serious
injury.
mWARNING! The cordless pole + pruning saw must be
fully assembled before operation! Do not use the tool that is only
partly assembled or assembled with damaged parts!
mWARNING! Starting, stopping, and restarting an electric
motor repeatedly within a few seconds can generate a great
deal of heat and damage the motor. To protect the life of your
cordless power tool, always wait at least five seconds after
stopping before restarting the unit.
mWARNING! Electrical Shock Hazard – Before starting
up your machine, please check it carefully for any defects. If
you find any, do not start up your machine and contact your
distributor.
NOTE: Take care of small parts that are removed during
assembly or when making adjustments. Keep them secure to
avoid loss.
Please contact an authorized Snow Joe
®
+ Sun Joe
®
dealer
or call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563) for all maintenance or
operations not foreseen in this manual. Any operation performed
in an unauthorized service center or by unqualified personnel
will completely invalidate the warranty.
mWARNING! For your safety and that of others:
• Correct maintenance is essential to maintain the original
efficiency and safety of the machine over time.
• Keep all nuts, bolts, and screws tight to be sure the
equipment is in safe working condition.
• Never use the machine with worn or damaged parts.
Damaged parts are to be replaced and never repaired.
mWARNING! Always wear protective gloves during
maintenance operations.
mWARNING! Use only original manufacturer’s replacement
parts, accessories and attachments. Failure to do so can
cause possible injury and poor performance. To order genuine
replacement parts or accessories for the Sun Joe
®
cordless
pole + pruning saw, please visit sunjoe.com or contact the
Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
Cleaning the Tool
mWARNING! Never let any liquid get inside the motor
housing and NEVER immerse any part of the housing in liquid.
1. Stop the motor and remove the battery.
2. Clean dirt and debris from the body of the tool, using a damp
cloth with a mild detergent.
NOTE: Do not use any strong detergents on the plastic
housing or the handle, as they can be damaged by certain
aromatic oils such as pine and lemon, and by solvents such
as acetone.
Storage
m
WARNING! Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating oils, solvents, etc., come
in contact with plastic parts. Chemicals can damage, weaken, or
destroy plastic which may result in serious personal injury.
1. Stop the motor and remove the battery.
2. Clean the pole + pruning saw thoroughly before storing.
3. Always place the bar sheath on the guide bar before storing
or transporting the pole + pruning saw. Use caution to avoid
the sharp chain.
Product specificaties
| Merk: | Sun Joe |
| Categorie: | Zaagmachine |
| Model: | 24V-HCSWP-6-LTE |
Heb je hulp nodig?
Als je hulp nodig hebt met Sun Joe 24V-HCSWP-6-LTE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Zaagmachine Sun Joe
29 Juli 2025
6 Januari 2025
15 November 2024
15 November 2024
26 Juli 2023
2 Juli 2023
20 Juni 2023
17 Juni 2023
4 Juni 2023
10 Mei 2023
Handleiding Zaagmachine
- Maestro
- Fein
- Einhell Bavaria
- Metabo
- Draper
- Vonroc
- MyTool
- Tacklife
- Flymo
- Milwaukee
- Max
- Yard Force
- TAURUS Titanium
- Proxxon
- Luxor
Nieuwste handleidingen voor Zaagmachine
30 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
28 Juli 2025
23 Juli 2025
21 Juli 2025
21 Juli 2025
20 Juli 2025
16 Juli 2025