Stihl FG 3 Handleiding

Stihl Zaagmachine FG 3

Lees hieronder de 📖 handleiding in het Nederlandse voor Stihl FG 3 (10 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10

english

FG 3

Dear Customer,

Thank you for choosing a quality

engineered STIHL product.

This machine has been built using

modern production techniques and

comprehensive quality assurance.

Every effort has been made to ensure

your satisfaction and troublefree use

of the machine.

Please contact your dealer or our

sales company if you have any

queries concerning your machine.

Hans Peter Stihl

Pictograms

All the pictograms attached to the

machine are shown and explained in the

this manual.

The operating and handling instructions

are supported by illustrations.

Symbols in text

The individual steps or procedures

described in the manual may be marked

in different ways:

:Step or procedure without direct

reference to an illustration.

Description of step or procedure that

refers directly to the illustration and

contains item numbers that appear in

the illustration.

Example:

Loosen the screw (1)

Lever (2) ...

In addition to the operating instructions,

this manual may contain paragraphs

that require your special attention. Such

paragraphs are marked with the

symbols described below:

Warning where there is a risk of an

accident or personal injury or

serious damage to property.

Warning where there is a risk of

damaging the power tool or

individual components.

Note or hint which is not essential

for using the power tool, but may

improve the operator’s under-

standing of the situation and result

in better use of the power tool.

Note or hint on correct procedure in

order to avoid damage to the

environment.

Guide to Using this Manual

Printing inks contain vegetable oils;

paper can be recycled.

0458 566 7721. M2. K1. T. Printed in Germany

13FG 3

english

Equipment and features

This instruction manual refers to

several models with different

features. Components that are not

installed in all models and related

applications are marked thus

Such components are available as

special accessories from your

STIHL dealer.

Engineering improvements

STIHL’s philosophy is to continually

improve all of its products. As a result,

engineering changes and improvements

are made from time to time. If the

operating characteristics or the

appearance of your machine differ from

those described in this manual, please

contact your STIHL dealer for

assistance.

To reduce the risk of

personal injury, special

safety precautions must

be observed while

operating the filing tool.

Read the operating

instructions carefully and

keep them in a safe place

for later reference.

Always shut off the saw engine before

working with the filing tool:

Move Master Control lever / slide control

or the separate stop switch to

STOP or $.

Electric saws: Disconnect plug from

power supply.

Wear gloves.

It is absolutely essential to comply with

the angles and dimensions specified in

these instructions. If the saw chain is

incorrectly sharpened – and in

particular if the depth gauges are set too

low – there is a risk of increased saw

kickback and personal injury.

Observing the safety precautions and

specifications in these instructions and

the owner’s manual of the saw model on

which the filing tool is mounted can help

reduce the risk of injury and damage to

the saw.

The STIHL filing tool can be used to

sharpen all STIHL Oilomatic saw chains

with the exception of square ground

chains (RSL, RSLF, RSLH) and carbide-

tipped chains (RD, RDS). Sharpening is

effected with the guide bar and chain

mounted on the saw.

For accurate results it is best to clamp

the guide bar in a bench vise or, at the

cutting site, in the STIHL bar vise

(special accessory).

File correctly

– Sharpen the chain frequently, take

away as little metal as possible –

two or three strokes of the file are

usually enough.

– Always file from the inside to the

outside of the cutter.

– The file only sharpens on the

forward stroke – lift the file off the

cutter on the backstroke.

– Avoid touching the tie straps and

drive links with the file.

Safety Precautions Application

Product specificaties

Merk:	Stihl
Categorie:	Zaagmachine
Model:	FG 3

Heb je hulp nodig?

Als je hulp nodig hebt met Stihl FG 3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Zaagmachine Stihl

Stihl MS 650 Handleiding

16 Juni 2023

Stihl MS 462 C-M Handleiding

13 Juni 2023

Stihl 020 T Handleiding

27 Mei 2023

Stihl MS 231 Handleiding

18 Mei 2023

Stihl TS 410 Handleiding

6 Mei 2023

Stihl MSE 190 C Handleiding

2 Mei 2023

Stihl MSE 180 Handleiding

2 Mei 2023

Stihl MSE 210 C-BQ Handleiding

30 April 2023

Stihl MS 150 TC Handleiding

29 April 2023

Stihl MS 230 Handleiding

28 April 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Worx Nitro WX542.9 Handleiding

26 April 2024

Fieldmann FZP 25410-B Handleiding

15 April 2024

Milwaukee M18 BJS Handleiding

10 April 2024

Rona Standard Plus-C Handleiding

10 April 2024

Rona Profi-C Handleiding

10 April 2024

Milwaukee SCS 65 Q Handleiding

10 April 2024

Milwaukee M12 BS Handleiding

10 April 2024

Milwaukee M18 FMCS66 Handleiding

10 April 2024

Milwaukee M18 BSX Handleiding

10 April 2024

Bavaria By Einhell BFS 800E Handleiding

9 April 2024