StarTech.com USB2004EXT2NA Handleiding

Bekijk gratis de handleiding van StarTech.com USB2004EXT2NA (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 40 mensen en kreeg gemiddeld 4.7 sterren uit 8 reviews. Heb je een vraag over StarTech.com USB2004EXT2NA of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: May 31, 2021 3:07 PM

Product Diagram (USB2004EXT2NA)

Front

Rear

ComponentFunction

1USB-A Ports

• Used to connect USB Devices (mouse, keyboard,

etc.) to the Remote Extender.

2LEDs (Local/Remote)

Power:

• Solid Blue: The Extenders are receiving power.

Link:

• Solid Green: The Extenders are linked.

• O: The Extenders are not linked.

Host:

• Solid:Extender is linked to the Host Computer.

• Flashing: Extenders are in suspend mode.

Activity:

• Flashing: Data is transmitted between Extenders.

• O:Extenders are in a suspended mode.

4 Port USB 2.0 Extender over Cat5e, Cat6, or Cat7 | Up to 330 ft (100 m)

3

Power Port 24V 1A

(Local/Remote)

• Used to connect the Remote Extender to AC

Electrical Outlets, using the Power Adapter

(included).

4Cong Port• Used for rmware management/updates.

5Mode Button• Used for rmware management/updates.

6

RJ45 Port - Link (Local/

Remote)

• Used to connect the Local Extender to the Remote

Extender.

• Max. data transfer rate = 480Mbps

7USB-B Host Port

• Used to connect the Local Extender to a Host

Computer, using the USB Cable (included).

Requirements

For the latest requirements, please visit www.startech.com/USB2004EXT2NA

• USB Enabled Host Computer

• Solid Core Cat5e unshielded twisted pair (UTP) or greater

Installation

1. Position the Local Extender near the Host Computer.

2. Position the Remote Extender near an AC Electrical Outlet.

3. Connect a Cat5e Cable (or better) to the RJ45 Port on the Local Extender and the

other end to the RJ45 Port on the Remote Extender.

Note: The Cat5e Cabling cannot go through any networking equipment (router,

switch, etc.).

4. Connect the USB Cable (included) to the USB-B Host Port on the Local Extender

and the other end to a USB port on the Host Computer.

5. Connect the Power Adapter (included) to the Power Port on the Remote Extender

and the other end to an AC Electrical Outlet.

6. Connect USB Devices to the USB-A Ports on the Remote Extender.

1

2

3

56

7

4

Product specificaties