StarTech.com ST122PRO Handleiding

Bekijk gratis de handleiding van StarTech.com ST122PRO (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 16 mensen en kreeg gemiddeld 4.3 sterren uit 5 reviews. Heb je een vraag over StarTech.com ST122PRO of wil je andere gebruikers van dit product iets vragen? Stel een vraag

2/4/8-Port High Resolution VGA Video Splitter

ST122PRO / ST122PROGB / ST122PROEU

ST124PRO / ST124PROGB / ST124PROEU

ST128PRO / ST128PROGB / ST128PROEU

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l’utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l’uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Packaging Contents

• 1 x VGA Video Splitter

• 1 x Power Adapter

• 4 x Rubber Feet

• 1 x Installation Guide

System Requirements

• VGA enabled video source (i.e. computer, PVR/DVR, etc.)

• VGA enabled display device (i.e. monitor, projector, etc.)

• Available AC electrical outlet

Installation

1. With the video source device and display devices powered

o, connect a male/female DE-15 VGA cable from the ‘Input’

connector on the splitter to the VGA video output on the source

device.

2. Using high quality male/male DE-15 VGA cables, connect each

display device to the Video Output connectors on the splitter.

NOTE: Port 1 is the primary output so EDID information will be taken from

there. The capabilities of the display on Port 1 will be applied to all other

ports so be careful not to exceed the capabilities of the other displays.

3. Connect the included power adapter from an AC electrical outlet

to the video splitter. The ‘Power’ LED should light up solid.

4. Power on the connected display devices, followed by the video

source device. Once a valid video signal is sent to the splitter, the

‘Active’ LED should light up.

Cascaded Installation

The VGA video splitter can be cascaded/daisy-chained with

additional VGA video splitters for expanded capabilities, such as

more ports and reaching greater distances.

1. Make sure all displays and the video source device are turned o

before installing.

2. To cascade/daisy-chain multiple video splitters together, use a

male/female DE-15 VGA cable to connect any one of the Video

Out connectors on the primary splitter, to the ‘Input’ connector

on the secondary splitter.

3. A video splitter can be connected to each Video Out connector

on the primary splitter, if required.

4. Up to three (3) levels of cascading is supported, so connecting

another video splitter to the secondary splitter is possible,

allowing for up to 8 (ST122PRO), 64 (ST124PRO), or 512

(ST128PRO) video displays to be connected to a single source.

Rear View

Front View

Installation Guide

*8-Port ST128PRO shown

Manual Revision: 02/21/2021

For the most up-to-date information, please visit: www.startech.com

Product specificaties