StarTech.com ST122HDMILE Handleiding

Bekijk gratis de handleiding van StarTech.com ST122HDMILE (36 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 41 mensen en kreeg gemiddeld 4.1 sterren uit 3 reviews. Heb je een vraag over StarTech.com ST122HDMILE of wil je andere gebruikers van dit product iets vragen? Stel een vraag

ST122HDMILE

2-Port HDMI Video Splitter with Audio

- USB Powered

Installation Guide

Manual Revision:12/02/2010

For the most up-to-date information, please visit www.startech.com

Packaging Contents

•1 x HDMI Splitter

•1 x 24in USB to DC Power Cable

•1 x Installation Guide

System Requirements

•HDMI enabled display devices (i.e. monitor, projector,

HDTV, etc.)

•HDMI enabled video source (i.e. computer, Blu-Ray

player, PVR/DVR, etc.)

•Available USB port

Installation

1. Make sure all displays and the video source device are

turned off before installing.

2. Connect an HDMI cable (not included) from each of the

video display devices (e.g. monitor, HDTV, etc) to the

numbered output HDMI connectors on the video splitter.

NOTE: Port 1 (OUT1) is the primary output so EDID

information will be taken from there. The capabilities of

the display on Port 1 will be applied to all other ports so be

careful not to exceed the capabilities of the other displays.

3. Connect the integrated HDMI cable from the video splitter

to the video source device (e.g. computer, PVR/DVR, etc).

If the cable is too short, an extension cable may be used.

4. Connect the included USB to power adapter cable from

the video splitter to an available USB port on the video

source device.

5. Turn on the display devices, followed by the video source.

The video output should be displayed on all connected

display devices.

Cascade Operation

The ST122HDMILE HDMI splitter can be cascaded/daisy-

chained with almost any other additional HDMI video

splitters for expanded capabilities, such as more ports and

reaching greater distances.

1. Make sure all displays and the video source device are

turned off before installing.

2. Connect the inputs of the second level HDMI

splitters to the “OUT1” and “OUT2” connectors on the

ST122HDMILE. If only connecting a single HDMI splitter,

make sure it is connected to “OUT1”.

3. Connect each of the video display devices (e.g. monitor,

HDTV, etc) to the output HDMI connectors on each of the

video splitters.

4. Power on the HDMI Video splitters, starting with the

ST122HDMILE, and then moving down the chain.

5. Turn on the display devices, followed by the video source.

The video output should be displayed on all connected

display devices.

NOTE:The more levels of HDMI splitters that are

cascaded, the greater the chances of the signal quality

becoming degraded.

Product specificaties