StarTech.com ST121HDBTRP Handleiding

Bekijk gratis de handleiding van StarTech.com ST121HDBTRP (2 pagina’s), behorend tot de categorie AV extender. Deze gids werd als nuttig beoordeeld door 51 mensen en kreeg gemiddeld 4.0 sterren uit 7 reviews. Heb je een vraag over StarTech.com ST121HDBTRP of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1. Input selection LEDs

2. Input selection button

3. Output selection LEDs

4. Status LED

5. IR sensor

6. Function button

Quick start guide

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 12/01/2016

For the latest information, technical specications, and support for

this product, please visit www.startech.com/ST121HDBTRP

Packaging contents

• 1 x HDBase-T repeater

• 1 x IR remote control

• 1 x universal power adapter (NA / UK / EU / AU)

• 1 x CAT5e cable

• 1 x mounting kit

• 1 x screw kit

• 1 x rubber foot pad set

• 1 x quick start guide

System requirements

• 1 x local HDBaseT video source or transmitter with cabling

• 1 x HDBaseT display or receiver with cabling

• 1 x HDMI source with cabling

• 1 x HDMI display with cabling

• 1 x remote destination HDBaseT display or receiver

HDBaseT™ Repeater - 4K

*actual product may vary from photos

Product overview

Front View

Rear View

1. Power adapter port

2. Grounding bolt

3. IR extender I/O ports

4. HDMI input port

5. HDBase-T input port

6. HDBase-T output port

7. HDMI output port

6

6

789

11

8. EDID switch

9. EDID copy buttons

10. RS232 switch

11. RS232 port

10

About this product

HDBaseT is a standardized, zero-latency video technology that’s

revolutionizing HDMI distribution. HDBaseT uses an advanced

method of modulation that enables you to distribute uncompressed

HDMI audio and video over long distances, over standard network

cabling.

This repeater receives your HDBaseT signal, and deploys it to an

additional receiver up to 70 m away, while outputting the HDBaseT

signal to an HDMI display at the repeaters location. The repeater also

enables you to add an HDMI source at the repeater’s location and

switch between sources at each connected HDMI and/or HDBaseT

display.

Preparing your site

1. At the local source, set up your HDBaseT video source, as

instructed by the documentation included with it.

2. Run your CAT5e or CAT6 cable from the RJ-45 output on the

HDBaseT source to the location you’d like to place the repeater.

Note:This needs to be a direct connection. Do not route the cable

through any networking equipment.

3. Set up your HDMI display near the location you’d like to place the

repeater.

4. (Optional) Set up your HDMI source near the location you’d like to

place the repeater.

5. At the remote destination, if you’re connecting to an HDBaseT

display, set up the display appropriately in your desired location.

or

If you’re connecting to HDBaseT receiver with an HDMI display,

set up the display appropriately in your desired location and

connect your HDBaseT device to the display, as instructed by the

documentation that was included with your HDBaseT receiver.

Notes: Please ensure that the repeater is situated near an

available AC power source. Make sure all devices are turned o

before you begin the installation.

Product specificaties