StarTech.com SSPMSVESA Handleiding

Bekijk gratis de handleiding van StarTech.com SSPMSVESA (2 pagina’s), behorend tot de categorie Flat panel steun. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 4.6 sterren uit 7 reviews. Heb je een vraag over StarTech.com SSPMSVESA of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: July 24, 2019 3:57 PM

Product Diagram (SSPMSVESA)

ComponentFunction

1

VESA Mounting

Bracket

• Used to mount a StarTech.com Docking

StationHubMonitor or to the back of a .

2VESA Mounting Holes

• Used to mount the to the back of a Adapter

Monitor Monitor’s VESA Mounting ,using the

Pattern.

Note: VESA mounting sizes are 75x75 and

100x100.

3Mounting Holes

• Used to mount a StarTech.com Docking

StationHubAdapter or to the .

Requirements

For the latest requirements, please visit www.startech.com/SSPMSVESA

If you are using a that covers the on the back of Monitor StandVESA Mounting Holes

the , a VESA compatible monitor mount will be require to use the .MonitorAdapter

Package Contents

• VESA Mounting Bracket x 1

• M3 x 5 mm Screws x 4

• M4 x 12 mm Screws x 4

• M4 x 20 mm Screws x 4

VESA Mount Adapter for StarTech.com Docking Stations and Hubs

• Spacers x 4

• Quick-Start Guide x 1

Attaching a StarTech.com Docking Station or Hub

1. Align the on the with the on the Mounting HolesAdapterMounting Holes

StarTech.com Docking StationHub or . The recessed hole pattern should be facing

outward so the will t properly.M3 x 5 mm (Countersunk) Screws

2. Insert the four through the on the M3 x 5 mm ScrewsMounting HolesAdapter

and into the on the or .Mounting HolesStartech.com Docking StationHub

3. Using a (sold separately) tighten the , Phillips Head ScrewdriverM3 x 5 mm Screws

being careful not to over-tighten the .M3 x 5 mm Screws

Mounting the Adapter (Flush)

1. Place the screen facing down on a at, clean, and secure surface.Monitor

2. Align the on the with the on the Mounting HolesAdapterVESA Mounting Holes

back of the .Monitor

3. Align the with the on the back of the VESA Monitor MountVESA Mounting Hole

Adapter, Adapter VESA Monitor Mount sandwiching the between theand the

back of the. Monitor

4. Insert four of the through the and the M4 x 12 mm ScrewsVESA Monitor Mount

AdapterMounting HolesMonitor and into the on the back of the .

5. Using a , tighten the , being careful Phillips Head ScrewdriverM4 x 12 mm Screws

not to over-tighten the .M4 x 12 Screws

Mounting the Adapter (Recessed)

Note: The and provided with the can be installed on SpacersScrewsAdapter

monitors with VESA mounting holes with a maximum depth of 7mm.

1. Place the screen facing down on a at, clean, and secure surface.Monitor

2. Place the four over the on the back of the .SpacersVESA Mounting HolesMonitor

3. Align the on the with the on the back on the Mounting HolesAdapter Spacers

Monitor.

4. Align the with the on the back of the VESA Monitor MountVESA Mounting Hole

AdapterAdapterVESA Monitor Mount, sandwiching the between the and the

Spacers.

2

1

3

Product specificaties