StarTech.com S251BU31REMD Handleiding

Bekijk gratis de handleiding van StarTech.com S251BU31REMD (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 4.7 sterren uit 5 reviews. Heb je een vraag over StarTech.com S251BU31REMD of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-start guide

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

Manual Revision: 03/07/2017

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/S251BU31REMD.

Package contents

• 1 x 2.5” SATA enclosure

• 1 x USB-C to Micro-B cable

• 1 x USB-A to Micro-B cable

• 4 x drive-mounting screws

• 1 x quick-start guide

Requirements

• 2.5” SSD or HDD

• Screwdriver

The S251BU31REMD is OS independent and doesn’t require any

additional drivers or software.

Note: The S251BU31REMD is designed to be used with the

S251BU31REM mobile backplane available at www.StarTech.com.

Requirements are subject to change. For the latest requirements,

please visit www.StarTech.com/S251BU31REMD.

S251BU31REMD

2.5” SSD/HDD Removable Enclosure - USB 3.1 (10Gbps)

*actual product may vary from photos

Introduction

The S251BU31REMD is a portable drive enclosure that enables

you to transport or store your drive. The portable drive enclosure

features USB 3.1 (10Gbps) connectivity, providing fast performance

and quick access to data.

Product diagram

Power LED

Activity

LED

SATA power connector

SATA data connector

USB 3.1 Micro-B port

Install a drive in the enclosure

Warning! Drives should be handled carefully, especially when

you transport them. If you’re not careful with your drives, you may

experience lost or corrupted data. Make sure that you’re properly

grounded by wearing an anti-static strap when you install any

computer component. If an anti-static strap isn’t available, touch a

large, grounded metal surface for several seconds to discharge any

built-up static electricity.

1. If the cover plate is installed, use a screwdriver (not provided)

to remove the from the end of the Housing assembly screws

enclosure and take o the cover plate.

2. Carefully pull the circuit board out of the enclosure.

3. Gently slide the connector on your drive into the corresponding

connectors on the circuit board.

4. Use the drive-mounting screws to attach the drive to the circuit

board.

5. Carefully slide the circuit board back into the enclosure.

6. Replace the cover plate on the enclosure, insert the Housing

assembly screws, and tighten them in place.

7. Connect one of the provided USB Micro-B cables to the USB 3.1

Micro-B port on the enclosure and your computer.

Housing assembly

screw

Housing assembly

screw

Product specificaties