StarTech.com PRIVSCNMON21 Handleiding

Bekijk gratis de handleiding van StarTech.com PRIVSCNMON21 (2 pagina’s), behorend tot de categorie Schermfilter. Deze gids werd als nuttig beoordeeld door 16 mensen en kreeg gemiddeld 4.7 sterren uit 7 reviews. Heb je een vraag over StarTech.com PRIVSCNMON21 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: November 27, 2019 12:13 PM

Product Diagram (PRIVSCNMON21, PRIVSCNMON24, or

PRIVSCNMON27)

ComponentFunction

1Privacy Filter

• Used to restrict visibility of the Monitor when

viewed past a 30 degree angle.

2Mounting Tabs (x 5)

• Used to secure the Privacy Filter to the

Monitor surface.

• The Adhesive Strips on the Mounting Tabs

can only be removed/reapplied to a surface

a couple of times before they lose their

eectiveness.

3Adhesive Strips

• Used to secure the Privacy Filter to the

Monitor surface.

• The Adhesive Strips can only be removed/

reapplied to a surface a couple of times before

they lose their eectiveness.

Requirements

For the latest requirements, please visit www.startech.com/PRIVSCNMON21, www.

startech.com/PRIVSCNMON24, or www.startech.com/PRIVSCNMON27

Installing the Privacy Screen Using the Adhesive Strips

It is recommended to use the Adhesive Strips to install the Privacy Screen if you intend

to permanently use the Privacy Screen without removing it from the Monitor. It is also

recommended to use the Adhesive Strips to secure the Privacy Filter to the Screen if

Universal Privacy Filter

the Monitor does not have an outside Frame.

1. Pull Adhesive Strips o of the Transparent Lining.

Removing the Adhesive Strips

2. Select which side of the Privacy Filter you wish to face outward (either matte or

glossy side).

3. Carefully align the Adhesive Strips on all the four edges (top, bottom, left, and

right) of the Privacy Filter.

Applying the Adhesive Strips

4. Firmly apply pressure to the Adhesive Strips as you carefully apply it to the Privacy

Filter.

5. Carefully remove the backing from the Adhesive Strips, exposing the adhesive.

Remove the Backing from the Adhesive Strips

1

2

3

Product specificaties