StarTech.com PEXUSB314A2V2 Handleiding

Bekijk gratis de handleiding van StarTech.com PEXUSB314A2V2 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.0 sterren uit 5 reviews. Heb je een vraag over StarTech.com PEXUSB314A2V2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: May 14, 2020 1:18 PM

Product Diagram (PEXUSB314A2V2)

ComponentFunction

1USB-A Ports

• Connect to theUSB Peripheral Devices PCIe

Card.

2Bracket Screws

• Secure the Low Prole Full Prole Bracket or

to the PCIe Card.

3PCI Express Connector

• Connects the to the PCIe CardPCI Express

SlotHost Computer on the .

4SATA Power Connector

• (Optional) Connect a 15 Pin SATA Power

ConnectorUSB to provide extra power to the

Type-A Ports.

Requirements

For the latest requirements, please visit www.startech.com/PEXUSB314A2V2

• Computer with an available PCI Express® slot (x4, x8, or x16)

• (Optional) SATA Power Source

Tools

• Small Phillips® Head Screwdriver

4 Port USB 3.1 PCIe Card w/ 2 Dedicated Channels

Hardware Installation

Installing the PCIe Card

Warning: PCIe Cards can be damaged by static electricity. Make sure that you are

properly grounded before you open your computer case or touch the . You PCIe Card

should wear an anti-static strap when you install any computer component. If an anti-

static strap is not available, discharge any built-up static electricity by touching a large

grounded metal surface for several seconds. Only handle the by its edges PCIe Card

and do not touch the gold connectors.

1. Turn o the and disconnect any that are connected ComputerPeripheral Devices

(e.g. printers, external hard drives, etc.).

2. Unplug the from the back of the .Power CableComputer

3. Remove the from the . CoverComputer Case

Note: Consult the documentation that came with the Computer for details on how to

remove the cover safely.

4. Locate an open (x4, x8, or x16) and remove the corresponding PCI Express Slot

Metal Cover PlateComputer Case from the back of the .

5. Gently insert the into the open and fasten the PCIe CardPCI Express SlotBracket

to the back of the .Computer Case

6. (Optional) Connect a from the to the 15 Pin SATA Power ConnectorPower Supply

SATA Power ConnectorPCIe Card on the .

Note: Connecting a separate to the will provide extra Power SupplyPCIe Card

power to the for charging connected .USB-A PortsDevices

7. Place the back onto the . CoverComputer Case

8. Reconnect the to the back of the .Power CableComputer

9. Reconnect all of the that were disconnected in step 1.Peripheral Devices

10. Connect to the on the.USB Peripheral DevicesUSB-A Ports PCIe Card

Software Installation

When the is installed the drivers should install automatically. If the drivers PCIe Card

do not automatically install, navigate to to www.startech.com/PEXUSB314A2V2

download the appropriate driver package.

1. Click on the tab, under , select the appropriate driver package for SupportDrivers

the running on the.Operating System Host Computer

2

1

3

4

Product specificaties