StarTech.com PEX4SFF8643 Handleiding

Bekijk gratis de handleiding van StarTech.com PEX4SFF8643 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.8 sterren uit 2 reviews. Heb je een vraag over StarTech.com PEX4SFF8643 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick-start guide

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

Manual Revision: 04/08/2016

For the latest information, technical specications, and support for

this product, please visit www.startech.com/PEX4SFF8643.

Package contents

• 1 x p1-x4 PCI Express to SFF-8643 adapter

• 1 x low-prole bracket

• 1 x full-prole bracket (installed)

• 1 x quick-start guide

System requirements

• Computer enabled with PCI Express and an available PCIe x4, x8, or

x16 slot

• Phillips head screwdriver

PEX4SFF8643

x4 PCI Express to SFF-8643 Adapter for PCIe Based U.2 SSD

*actual product may vary from photos

Product diagram

Mounting bracket

(full-prole pictured)

SFF-8643 connector

PCIe p1-x4

connector

Bracket screws

Install the low-prole bracket

The PEX4SFF8643 can be mounted in both low-prole and

full-prole computer systems. The full-prole bracket comes

preinstalled in the adapter but you can install the low-prole bracket

instead.

1. Use a Phillips head screwdriver to remove the two bracket screws

from the PEX4SFF8643.

2. Remove the full-prole bracket from the adapter.

3. Line up the low-prole bracket with the bracket holes on the back

of the adapter.

4. Insert the two bracket screws that you removed in step 1 and

tighten them in place.

Install the adapter in a computer

Warning! PC components can be severely damaged by static

electricity. If an anti-static strap isn’t available, discharge any built-

up static electricity by touching a large, grounded metal surface for

several seconds.

1. Turn o your computer and any devices or peripherals that are

connected to it (for example, printers, external storage, and so

on).

2. Unplug the power cable from the back of your computer.

3. Disconnect any peripheral devices that are connected to your

computer.

4. Open your computer case. For more information about how to

properly do this, consult the documentation that came with

your computer system.

5. Locate an open PCIe slot and remove the corresponding metal

cover plate from the back of your computer case. Consult the

documentation that came with your computer for details about

how to do this safely. This card works in PCIe slots of x4, x8, or

x16 lanes.

6. Gently insert the card into the open PCIe slot and use a

computer case screw (not included) to fasten the bracket to the

back of the case.

7. Connect the card to the drive.

8. Place the cover back onto your computer case.

9. Reconnect the power cable to the back of your computer and

all of the peripheral devices that you disconnected in step 3.

10. Turn on your computer.

Introduction

The PEX4SFF8643 converts SFF-8643 to PCI Express® for use with

PCIe SSDs, which enables you to use PCIe to connect a high-

performance PCIe based U.2 SSD to your computer.

The adapter can be mounted in both low-prole and full-prole

computer systems.

The PEX4SFF8643 is OS independent and doesn’t require any

additional drivers or software.

System requirements are subject to change. For the latest

requirements, please visit www.startech.com/PEX4SFF8643.

Note:To determine if the drive and motherboard that you’re using

are compatible, consult the technical specications that came with

the drive and motherboard.

LED posts

Product specificaties