StarTech.com P2AD122-KVM-SWITCH Handleiding

Bekijk gratis de handleiding van StarTech.com P2AD122-KVM-SWITCH (1 pagina’s), behorend tot de categorie Schakelaar. Deze gids werd als nuttig beoordeeld door 35 mensen en kreeg gemiddeld 4.9 sterren uit 5 reviews. Heb je een vraag over StarTech.com P2AD122-KVM-SWITCH of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Hotkey Command Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Hotkey Command Revision: January 29, 2025

2-Port 4K 60Hz DisplayPort KVM Switch - USB 5Gbps Hub - EDID Emulation

Product IDs

P2AD122-KVM-SWITCH

Product Information

For the latest software, manuals, product information, technical specications, and

declarations of conformance, please visit:

www.StarTech.com/P2AD122-KVM-SWITCH

Hotkey Commands

Hotkey commands are keystroke sequences that initiate computer/device functions.

Hotkey commands can be used to initiate KVM Switch functions. A hotkey command

sequence must be initiated by the HK_LCode, followed by 1-2 additional keystrokes.

Successful hotkey command inputs result in a high-pitched beep. Unsuccessful hotkey

command inputs result in a low-pitched beep.

Notes:

- All keystroke combinations must be entered in rapid succession.

- Press and release the indicated keys, unless otherwise specied.

- Numbers entered during the hotkey sequence cannot be entered using a number pad

HK_LCode

Option 1

• Scr Lck + Scr Lck

Option 2

• Left Ctrl + Left Ctrl

Option 3

• Left Shift (Hold) + Num Lck + Num Lck + Release Left Shift

Hotkey CommandFunction

HK_LCode1 ~ 2 + • Select PC 1 ~ PC 2

HK_LCodeF1 + • Start Auto Scan

HK_LCodeF2 +

• Start Manual Scan -- Manually switch back and forth

between PCs

• Press the or key to select the Up Arrow Down Arrow

next/previous PC

HK_LCodeF3 +

• Adjust Scan Rate - KVM Switch generates one to four

beeps that indicate the duration of the scan time:

• One beep = 3 seconds

• Two beeps = 8 seconds

• Three beeps = 15 seconds

• Four beeps = 30 seconds

HK_LCode + F5

• Enable/Disable the binding of PC and Audio Switching.

• Bound by default forcing PC and Audio to switch

together

• Unbound = PC Audio stops following the selected PC

when switching (1 beep)

• Bound = PC Audio matches the selected PC (2 beeps)

HK_LCode + A

• Force Audio to follow selected PC

• If audio was unbound, this command will rebind

audio to switch with the PC ports

HK_LCode + Alt (Hold)

+ Right Ctrl + Release

Alt

• Changeleading hotkey to Left Ctrl + Left Ctrl

Right Ctrl + Right Ctrl

HK_LCode + Alt (Hold)

+ Left Ctrl + Release

Alt

• Changeleading hotkey to Right Ctrl + Right Ctrl

Left Ctrl + Left Ctrl

Product specificaties